EXECUTIVE LOCKERS AND BENCHES - Keller Office
EXECUTIVE LOCKERS AND BENCHES - Keller Office EXECUTIVE LOCKERS AND BENCHES - Keller Office
TOUCH TO OPEN 11 Local building officials will eventually require your clubs to comply with The Americans with Disabilities Act of 1990 which requires the following: At least one of each type locker offered, and for double-tier lockers only the bottom row, be provided for handicapped people. A clear floor space of 30"x48" minimum will allow for either forward or parallel approach by a person using a wheelchair. Storage spaces such as shelves, hooks, coat rods, etc., shall be located at a height of 9" minimum and 48" maximum from the finished floor. Acceptable hardware for accessible lock- ers are touch latches and U-shaped pulls located as close to the top of the door as possible. Sheet Metal Bracket Bend to Fit Installation DETAIL H DETAIL L 5/8" Air Gap 5/8" Blocking Spacer Block DETAIL J Access to Locker C 1" A Base 1" less than Locker Frame 48" Minimum Detail H B Sheet Metal Bracket Detail J Recess Padlock Hasps (user supplied lock) International Symbol of Accessibility 3x5 “Touch to Open” TOUCH TO OPEN Scribe Coat Hooks Magnetic Latch Mini Shelf DETAIL K Recess Padlock Hasps (user supplied lock) Spacer Block Mini Shelf 32" 18"
GENERAL NOTES LOCKER ROOM DIAGRAMS 1. Locker to be standard as manufactured by Ideal Lockers. 2. 5/8" spacers edged with matching edging to allow for hand clearance. 3. Single end panels 18 5/8" wide to cover rear ventilation. 4. Double end panels 36 5/8" wide to allow for air space. 5. Fillers are required. 6. TLW (total locker width) = Total number of lockers x locker width. 12" lockers are 12.0625" wide; 16" lockers are 16.0625" wide. 7. Consult factory for requirements. 7 Tight Corner (see #F) Corner (see #B) 7 Straight Corner Fillers TIGHT CORNER DETAIL F 7 CORNER DETAIL B Corner Cap Corner Cap Straight Corner Filler 5 Corner Filler Double End Panel 5 Corner Filler 13/16" 3 4 6 TLW STRAIGHT DETAIL E BUILT-IN DETAIL C 5/8" 5/8" 6 TLW 6 2 TLW 5 Straight End Panel Corner Fillers 2 Spacers Spacer Built-in (see #C) 13/16" Corner Cap Island (see #D) 5 STRAIGHT FILLER DETAIL G 5 Straight Filler Corner Filler T-Shape Peninsula (see #A) 5 Straight Filler T-SHAPE DETAIL A Bracket Detail K 4 Double End Panel See Detail K Straight Filler (see #G) Straight End Panel Straight (see #E) ISLAND DETAIL D 6 TLW 13/16" 13/16" 3 12
- Page 1 and 2: EXECUTIVE LOCKERS AND BENCHES
- Page 3 and 4: A B C D E F G H I J K L M N O P Q R
- Page 5 and 6: SECURA 1000 — Fitness Center, Ran
- Page 7 and 8: 3000-3 raised lower platform 3000-1
- Page 9 and 10: Epicenter Athletic Locker Finished
- Page 11: COAT ROD made of 3/4" diameter nick
- Page 15 and 16: ECONO BENCH Ideal’s most popular
TOUCH TO<br />
OPEN<br />
11<br />
Local building officials will eventually require your clubs to<br />
comply with The Americans with Disabilities Act of 1990<br />
which requires the following: At least one of each type<br />
locker offered, and for double-tier lockers only the bottom<br />
row, be provided for handicapped people. A clear floor<br />
space of 30"x48" minimum will allow for either forward or<br />
parallel approach by a person using a wheelchair. Storage<br />
spaces such as shelves, hooks, coat rods, etc., shall be<br />
located at a height of 9" minimum and 48" maximum from<br />
the finished floor. Acceptable hardware for accessible lock-<br />
ers are touch latches and U-shaped pulls located as close to<br />
the top of the door as possible.<br />
Sheet Metal<br />
Bracket<br />
Bend to Fit<br />
Installation<br />
DETAIL H DETAIL L<br />
5/8" Air Gap<br />
5/8" Blocking<br />
Spacer<br />
Block<br />
DETAIL J<br />
Access to Locker<br />
C 1" A<br />
Base 1" less than<br />
Locker Frame<br />
48"<br />
Minimum<br />
Detail H<br />
B Sheet Metal<br />
Bracket<br />
Detail J<br />
Recess Padlock<br />
Hasps (user<br />
supplied lock)<br />
International<br />
Symbol of<br />
Accessibility 3x5<br />
“Touch to Open”<br />
TOUCH TO<br />
OPEN<br />
Scribe<br />
Coat Hooks<br />
Magnetic<br />
Latch<br />
Mini Shelf<br />
DETAIL K<br />
Recess<br />
Padlock<br />
Hasps<br />
(user<br />
supplied<br />
lock)<br />
Spacer<br />
Block<br />
Mini Shelf<br />
32"<br />
18"