Catalogue 2012/2013 - Putzmeister Mörtelmaschinen GmbH

Piston pumps
P 13 piston pump
The robust machine for really difficult mixes and all pumpable sands to 10 mm
The robust P 13 is suitable for really difficult site-made mixes
and almost any type of pumpable sand. It is extremely low-wear
and completely reliable.
Above all, this machine is intended for construction sites
where really harsh conditions prevail. A deliberate decision
was therefore taken to avoid electronic components. All
functions and operating elements of the P 13 are purely
mechanical and therefore particularly robust and insusceptible
to malfunction.
It is suitable for site-made mixes or bagged interior
and external plasters, bentonite limes, coloured mortar,
cement plaster, lime cement plaster, fine shotcrete
material, masonry mortar, self levelling floor
screed, and grouting work (in all cases, the
mix must be homogenous).
With the extremely resistant type KA 230 pump, it can also
process practically any sand up to a granulation of 10 mm:
crushed sand, dune sand, washed river and sea sand, desert
sand, and much more.
Part no. 111 632.000
Robust and powerful piston pump
(in this case, KA 230)
38
Positive mixer with
volume of 170 l
Integrated compressor
Robust metal hood protects
the motor, compressor, and
gearbox
Output can be regulated
(3 stages)