Mitac 8080 Service Manual - laptop schematics, notebook ...

2.2.12 Touch Pad
Disassembly
8080 N/B Maintenance
1. Carefully put the notebook upside down.
2. Remove the battery pack. (See section 2.2.1 Disassembly)
3. Remove the keyboard, CPU, hard disk drive, CD/DVD-ROM drive, DDR-SDRAM and LCD Assembly. (See the
previous sections Disassembly)
4. Remove the system top cover. (See the steps 3 to 7 of section 2.2.10 Disassembly)
5. Remove four screws fastening the touch pad bracket. Then remove it. (Figure 2-29)
6. Remove the click holder and touch pad panel. (Figure 2-30)
Figure 2-29 Disconnect the cable
Figure 2-30 Unscrew screws and hex nuts
72