06.03.2013 Views

Mitac 8080 Service Manual - laptop schematics, notebook ...

Mitac 8080 Service Manual - laptop schematics, notebook ...

Mitac 8080 Service Manual - laptop schematics, notebook ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>8080</strong> N/B Maintenance<br />

The NS PC87393 LPC Super I/O device is targeted for a wide range of portable applications. PC99 and ACPI<br />

compliant, it also incorporates: a Floppy Disk Controller (FDC), two enhanced Serial Ports (UARTs), one with Fast<br />

Infrared (FIR, IrDA 1.1 compliant), General-Purpose Input/Output (GPIO) support for a total of 32 ports, Interrupt<br />

Serializer for Parallel IRQs and an enhanced WATCHDOG timer.<br />

The NS PC87393 Super I/O controller integrates the standard PC I/O functions: LPC bus interface, X-Bus Extension<br />

for read and write operations, floppy disk interface and one EPP/ECP capable parallel port. Like all LPC Super I/O<br />

devices, the PC87393 offers a single-chip solution to the most commonly used PC I/O peripherals to provide for the<br />

increasing number of multimedia application.<br />

The STAC9750 is a 2 channel, 20-Bit DAC and 20-Bit ADC, full duplex AC’97 2.2 compatible stereo audio CODEC<br />

designed for PC multimedia systems, including soft/host audio and riser card base design. The STAC9750 supports<br />

with independent variable hardware sampling rates. The STAC9750 CODEC provides two pairs of stereo outputs with<br />

independent volume control, a mono output, a headphone output, and multiple stereo and mono inputs, alone with<br />

flexible mixing, gain and mute functions to provide a complete integrated audio solution for PCs. The STAC9750 also<br />

support an AC’97 2.2 compliant S/PDIF out functions which allows easy connection from the PC to consumer<br />

electronic products.<br />

The CH7011A is a display controller device which accepts a digital graphics input signal, and encodes and transmits<br />

data to a TV output (analog composite, s-video or RGB). The device accepts data over one 12-bit wide variable<br />

voltage data port which supports five different data format including RGB and YcrCb. The TV-Out processor will<br />

perform non-interlace to interlace conversion with scaling and flicker filters, and encode the data into any of the<br />

NTSC or PAL video standards. The scaling and flicker filter is adaptive and programmable to enable superior text<br />

display. Eight graphics resolutions are supported up to 1024 X 768 with full vertical and horizontal underscan<br />

capability in all modes. A high accuracy low jitter phase locked loop is integrated to create outstanding video quality.<br />

6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!