Mitac 8080 Service Manual - laptop schematics, notebook ...

2.2.10 System Board
Disassembly
8080 N/B Maintenance
1. Carefully put the notebook upside down.
2. Remove the battery pack. (See section 2.2.1 Disassembly)
3. Remove the keyboard, CPU, hard disk drive, CD/DVD-ROM drive, DDR-SDRAM and LCD Assembly. (See the
previous sections Disassembly)
4. Remove nine screws on the bottom of notebook. (Figure 2-22)
5. Disconnect the speaker’s cord from system board in the heatsink compartment. (Figure 2-23)
Figure 2-22 Unscrew nine screws Figure 2-23 Disconnect the cord
67