Mitac 8080 Service Manual - laptop schematics, notebook ...

8080 N/B Maintenance
7. Loosen the screw by a flat screwdriver,upraise the CPU socket to unlock the CPU. (Figure 2-8)
Reassembly
Figure 2-8 Remove the CPU
1. Carefully, align the arrowhead corner of the CPU with the beveled corner of the socket, then insert CPU pins into
the holes. Tighten the screw by a flat screwdriver to locking the CPU.
2. Connect the fan’s power cord to the system board, fit the heatsink onto the top of the CPU and secure with four
spring screws.
3. First, replace the heatsink compartment cover. Then fit the DDR SDRAM compartment cover and secure them
with five screws.
4. Replace the battery pack. (See section 2.2.1 Reassembly)
56