Mitac 8080 Service Manual - laptop schematics, notebook ...

1.1 Introduction
8080 N/B Maintenance
1. Hardware Engineering Specification
1.1.1 General Description
This document describes the brief introduction for MiTAC 8080 portable notebook computer system.
1.1.2 System Overview
The MiTAC 8080 model is designed for Intel Banias processor with 400MHz FSB with Micro-FCPGA package. It
can support Banias 1.3GHz ~ 1.7GHz.
This system is based on PCI architecture and is fully compatible with IBM PC/AT specification, which has standard
hardware peripheral interface. The power management complies with Advanced Configuration and Power Interface
(ACPI) 2.0. It also provides easy configuration through CMOS setup, which is built in system BIOS software and can
be pop-up by pressing F2 key at system start up or warm reset. System also provides icon LEDs to display system
status, such as AC Power indicator, Battery Power indicator, Battery status indicator, CD-ROM, HDD, NUM LOCK,
CAP LOCK, SCROLL LOCK, RF on/off status and Card Reader indicator. It also equipped with LAN, 56K Fax
MODEM, 3 USB port, 3D stereo audio functions, S-Video and audio line out(S/PDIF), external microphone and an
optional finger printer in function.
The memory subsystem supports two expansion DDR SDRAM slot with unbuffered PC1600/PC2100 DDR-SDRAM.
4