User Guide (Printer/Scanner) - Fuji Xerox Worldwide

Special Printing
4
66
4.2
Printing Non-Standard
Paper Size
This section describes how to print non-standard paper size. To print non-standard paper
size, you have to customize the paper size on the printer driver first.
Once the non-standard paper size has been customized, you can select it from Paper Size
and Output Size on the Paper/Output tab. Use tray 5 (Bypass Tray) for printing.
You can customize up to five paper sizes with a separate name for each size. For sizes in
millimeters, you can enter in units of 0.1 mm and between 100.0 – 305.0 mm for the short
edge, 140.0 – 482.6 mm for the long edge; and for sizes in inches, in units of 0.01 inch and
between 3.94 – 12.01 inch for the short edge, 5.51 – 19.00 inch for the long edge.
For the name of the customized size, you can enter up to 14 characters.
For Windows NT 4.0, Windows 2000, Windows XP, only Administrators can change the setting. All other users can
only check the contents.
As local printer uses the client’s form database, configuring settings on the Custom Paper Size dialog box on
Windows NT 4.0, Windows 2000, Windows XP will affect other printers of the client. For network printer, using
form database of the server with print queue will also affect the shared printer on the same network of other clients.
For Windows 95, Windows 98, Windows Me, defining customized paper sizes for each printer icon will not affect
settings of other printer on the client. For network printer, defining customized paper sizes for each printer icon will
also not affect the shared printer on the same network of other clients.
4.2.1 Customizing Non-Standard Paper Size
Procedure
Customize non-standard paper size on the Custom Paper Size dialog box.
1 From the Start menu, select Settings and then click Printers to display
the printer properties dialog box.
2 Click the Configuration tab.