User Guide (Printer/Scanner) - Fuji Xerox Worldwide

3.6 Canceling Printing/Checking Job Status
2 To stop printing, either press C on the control panel or select Stop on
the following screen. However, the page in the midst of printing will be
printed.
To continue printing, either press the Start button on the control panel or select the Start button on the
screen.
Canceling jobs inside the machine
Procedure
Ready to print.
Touch Start to resume printing or Stop to cancel the job.
Print Job :Doc. No. 00456
: akira. endo
: Host1
: document
Quantity : 2 / 4
Pages : 2 / 10
Center Output Tray
The process to cancel print jobs received by the machine is as follows. Through
this procedure, you can interrupt the receiving of data and empty the buffer.
Buffer is the location to store data sent from the client.
You can also execute and print all jobs in the machine. For details, see “7.2.8 Forcibly Outputting
Data Wait Documents” in “Part 1 Hardware” of the User Guide (Copier).
1 On the control panel, press Job Status.
The Job Status screen is displayed.
2 On the screen, select Current and Pending Jobs.
A list of jobs in process or waiting will be displayed.
Stop
Start
Close
Job Status
Current and
Pending Jobs
Completed Jobs
Stored
Documents
Print
Waiting Jobs
Doc. No. - Job Type Status Remote Terminal/Contents Pages
00117-Copy Job Copying A4 : 100% 25/100
00010-Print Job Print Wait Fuji Taro : MDG 0/120
00015-Print Job Print Wait Fuji Taro : MDG 0/50
Basic Printing
3
59