User Guide (Printer/Scanner) - Fuji Xerox Worldwide
User Guide (Printer/Scanner) - Fuji Xerox Worldwide
User Guide (Printer/Scanner) - Fuji Xerox Worldwide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.2 About Paper<br />
The range of paper that can be used for tray 5 (Bypass Tray) is as follows:<br />
Paper Size<br />
Non-standard paper<br />
sizes* 3 :<br />
Short edge 100 – 305 mm<br />
Long edge 140 – 482.6 mm<br />
Standard paper sizes:<br />
A3, B4, A4, A4 * 5 ,<br />
B5, B5 * 5 , A5 * 5 , B6, A6,<br />
8K, 5.5×8.5”, 5.5×8.5” * 5 ,<br />
8.5×11", 8.5×11" * 5 ,<br />
8.5×13", 8.5×14", 11×17",<br />
12×18"* 4 , Custom 1-5<br />
Paper Weight<br />
G.S.M.* 1<br />
55 – 220<br />
g/m 2<br />
Ream<br />
Weight* 2<br />
47 – 189<br />
kg<br />
Paper Type<br />
Bond<br />
(64 – less than<br />
105 g/m2 )<br />
Plain<br />
(64 – less than<br />
105 g/m2 )<br />
Recycled<br />
(64 – less than<br />
105 g/m2 )<br />
Heavyweight 1 -<br />
Side 2<br />
(106 – 169 g/m2 )<br />
Heavyweight 2 -<br />
Side 2<br />
(170 – 220 g/m2 )<br />
Transparency* 6<br />
Lightweight<br />
(55 – 63 g/m2 )<br />
Labels<br />
Custom 1-5<br />
Loading<br />
Capacity<br />
Up to 10 mm;<br />
100 sheets<br />
(P paper)<br />
*1 G.S.M. is the weight of a sheet of paper with an area of one square meter.<br />
*2 Ream weight refers to the weight of 1,000 sheets of paper of size 788 × 1,091 mm.<br />
*3 When printing with non-standard paper sizes, you will need to customize the paper size<br />
on the printer driver. For details on customizing paper size, see the On-line Help of the<br />
printer driver.<br />
*4 When printing with 12×18" paper size, move the paper guide before loading the paper.<br />
For details on moving the paper guide, see “ Moving paper guide” (P. 44).<br />
*5 To set orientation, you need to configure the setting on the Configuration tab of the<br />
printer driver. For details, see the on-line Help of the printer driver.<br />
*6 For transparency, A4, A3, Letter and Ledger sizes can be used. Moreover, it is recommended<br />
to load in the portrait direction when loading transparencies in tray 5 (Bypass<br />
Tray).<br />
● If the paper size or type used for printing is different from the selection on the printer driver, it may<br />
cause paper jam. In order to print correctly, select the correct paper size and type, as well as the<br />
paper tray.<br />
● When outputting transparencies continuously, they might stick to each other. To prevent that,<br />
remove about 20 sheets from the output tray, and then fan well to lower the temperature.<br />
Basic Printing<br />
3<br />
41