User Guide (Printer/Scanner) - Fuji Xerox Worldwide

3.2
About Paper
This section describes the points to be note about the paper to be used for printing with the
machine. Other than these, there is no difference on using paper for copying and printing.
“2.1 Loading Paper” in “Part 1 Hardware” of the User Guide (Copier) for details on paper types suitable or
unsuitable for copying and loading in each tray.
3.2.1 Difference From Copying
● When using tray 5 (Bypass Tray), there is a restriction on the orientation of
loading paper.
“3.2.6 Loading Paper in Tray 5 (Bypass Tray)” (P. 40) for details on the orientation of loading
paper and using tray 5 (Bypass Tray).
3.2.2 Caution for Printing
● If the paper size or type used for printing is different from the selection on the
printer driver, or if the paper is loaded in an unsuitable paper tray, it may cause
paper jam. In order to print correctly, select the correct paper size and type, as
well as the paper tray.
● When printing with 12 × 18" paper size, move the paper guide before loading
the paper.
“3.2.6 Loading Paper in Tray 5 (Bypass Tray)” (P. 40) for details on how to print or move the
paper guide.
● When printing with non-standard paper sizes, you may need to customize the
paper size on the printer driver.
The On-line Help of the printer driver for details on customizing paper size.
Basic Printing
3
37