User Guide (Printer/Scanner) - Fuji Xerox Worldwide

Setting up Network
2
28
2.2
TCP/IP (LPD)
This section describes how to connect the machine to Windows computer using TCP/IP
(LPD).
2.2.1 System Structure
This machine supports TCP/IP (LPD). The following describes the different connections
in brief:
■For Windows 95, Windows 98, Windows Me
Using our TCP/IP Direct Print Utility, print data can be sent directly to a printer on
the same network (Ethernet interface) for printing without going through a server.
TCP/IP Direct Print Utility is installed together with the printer driver.
You will need to set the IP address on the machine and the Windows 95, Windows
98, Windows Me computer.
■For Windows NT 4.0, Windows 2000, Windows XP, Mac OS X
Print data can be sent directly and printed using the standard LPR port for OS
(standard TCP/IP port for Windows 2000). You will need to set the IP address on
the machine and the Windows NT 4.0, Windows 2000, Windows XP, Mac OS X
computer.
Once the machine registered on Windows NT 4.0, Windows 2000, Windows XP,
Mac OS X computer is shared, you can also send data from Windows 95, Windows
98, Windows Me machine to the shared machine for printing.
The receiving of printing by IP address can be limited. For details, see “5.7 Print Mode Settings” in
“Part 1 Hardware” of the User Guide (Copier).