User Guide (Printer/Scanner) - Fuji Xerox Worldwide

Setting up Network
2
26
2.1
Windows Network (SMB)
This section describes how to connect this machine to a Windows network using SMB.
2.1.1 System Structure
SMB is a protocol for sharing file or printer on Windows 95, Windows 98,
Windows Me, Windows NT 4.0, Windows 2000, and Windows XP. Using SMB,
print data or settings can be sent directly to a printer on the same network (Ethernet
interface) without going through a server.
You can begin printing by activating the SMB port on the machine, and then registering
the printer on the network on each of the Windows 95, Windows 98,
Windows Me, Windows NT 4.0, Windows 2000, and Windows XP OS.
Depending on the network environment, you may need to set IP address, subnet
mask and gateway address for the machine. Consult your network administrator
for details on setting the needed item.
● “1.3 Setting IP Address” (P. 13) for details on setting IP address.
● The receiving of printing by IP address can be limited. For details, see “5.7 Print Mode Settings”
in “Part 1 Hardware” of the User Guide (Copier).