User Guide (Printer/Scanner) - Fuji Xerox Worldwide

9 Select Enable and then Save.
1. LPD - Port Status
Disable
Enable
The LPD screen is displayed.
1.4 Setting Port
To activate the LPD port, the IP address must be set. If the IP address has not been set, selecting the
Enable button will display the TCP/IP - Get IP Address screen. For details on setting the IP address,
see “1.3 Setting IP Address” (P. 13).
10 Check that Current Settings for Port Status is Enabled and then select
Close.
LPD
Items Current Settings
1. Port Status Enabled
The Port Settings screen is displayed.
Cancel
11 Repeat steps 6 to 9 to set SNMP to Enabled.
If there are other ports needed for printing, repeat steps 7 to 10 to set their status to Enabled.
12 Select Close repeatedly until the System Settings screen is displayed.
13 Select Close.
The machine will reboot and the display will return to the previous screen prior to this procedure.
Save
Close
Change
Settings
Setting Printer Environment 1
21