User Guide (Printer/Scanner) - Fuji Xerox Worldwide

Appendix
254
F Troubleshooting When Using NetWare
Cause Verification Action
There are printers with similar
device name on the network.
Switch off the machine and
using NWADMIN from the workstation,
check that the status of
the corresponding printer object
is job waiting.
NetWare port is not activated. Print out the System Settings
List and check if the network
number when using IPX/SPX is
at “00000000” (NetWare server
down). Also, check if the IP
address when using TCP/IP is at
“0.0.0.0” (fixed IP not set or
address supply server (DHCP)
down).
Using the CentreWare Driver &
Network Utility CD-ROM from
the workstation, set another host
name.
For IPX/SPX, activate NetWare
server. For TCP/IP, set the fixed
IP address or activate the
address supply server (DHCP).
*: Refer to “NetWare Online Documentation” for details on how to set and check.
F.2 When “Switch off the power” Appears
Cause Verification Action
An error occurs in NetWare. ⎯ Switch the machine off and on.
Switch on the machine only
when there is nothing on the display.
F.3 When Target Print Result Is Not Obtained
Cause Verification Action
The print language of the print
job is different from that set up
on this machine.
Check the print language of this
machine.
Set the same print language for
the print job and this machine.