User Guide (Printer/Scanner) - Fuji Xerox Worldwide

The number of paper definition
specified at the print server is
not the same as that of paper
definition set at the print queue.
Using NWADMIN from the workstation,
check if the paper definition
specified at the print server
is same as that of paper definition
set at the print queue.*
F Troubleshooting When Using NetWare
Cause Verification Action
The level setting for IPX checksum
is wrong.
The level setting for NCP packet
signature is wrong.
The default device name is
wrong.
The directory tree name is not
set.
At the console screen of the file
server, execute a set command
and check if the IPX checksum
is set to level 2.
At the console screen of the file
server, execute a set command
and check if the NCP packet signature
is set to level 3.
Print out the System Settings
List, and check the lower six
characters (3 bytes) of the Ethernet
address.
Print out the System Settings
List and check if the tree name is
specified.
Context is not set. Print out the System Settings
List and check if the context is
specified.
Connected to another printer
object.
NetWare port cannot be activated
by setting.
Using NWADMIN from the workstation,
check if the object is correctly
assigned by the layout
information of the desired print
server. *
Print out the System Settings
List and check if the NetWare
port is activated.
File server is down. Search for the target file server
in Network Neighborhood.
Using NWADMIN from the workstation,
specify the same number
of paper definition at the
print server as that of paper definition
set at the print queue. *
At the console screen of the file
server, enter the following command
and set the IPX checksum
to level 0 or 1:
set Enable IPX Checksum = x (x:
0 or 1)
At the console screen of the file
server, enter the following command
and after setting the NCP
packet signature to level 0, 1, or
2, restart the file server:
set NCP Packet Signature
Option = x (x: 0, 1, or 2)
1. Set the device name using
the correct Ethernet address.
2. Set the device name to any
name except the default
name.
Set the tree name.
Set the context.
1. Using the PCL Driver/Network
Utility CD-ROM from the
workstation, set the file
server name, tree name, context,
active mode correctly.
2. Using the CentreWare Internet
Services from the workstation,
set the file server
name, tree name, context,
active mode correctly.
Activate the NetWare port.
Activating the file server.
Appendix
253