User Guide (Printer/Scanner) - Fuji Xerox Worldwide

Recommendations

Info

Setting Printer Environment 1 12 1.2 Connecting Interface Cable Procedure The following procedure describes how to connect by the Token Ring interface. 1 Connect the Token Ring interface cable to the Token Ring interface connector. Do not connect the interface cable to the two Token Ring interface port connectors. This may cause poor transmission or breakdown. Use only interface cable meant for the network connection in use. 2 Turn on the power of the machine. If necessary, set the following items on the printer control panel (Network/Port>): ● IPX/SPX FrameType (Default: Auto) ● Token Ring - Transmit Rate (Default: Auto) ● Token Ring - Max Packet Size (Default: 1,500 Octet) ● Token Ring - Source Routing (Default: Off) For normal use, there is no need to change the default settings of all the items.
1.3 Setting IP Address This section describes how to set the IP address. Depending on the network environment, you may need to set the subnet mask and gateway address for the machine. If your network environment has a Reverse ARP Protocol (RARP), Dynamic Host Configuration Protocol (DHCP) or BOOTP environment, you may obtain the address automatically from each of these servers. By default, these items will be obtained automatically from the DHCP server. To check if the address has been obtained from the DHCP, RARP or BOOTP servers, either carry out the procedure in “1.3.1 Setting IP Address” (P. 14) and then check the settings of the IP address, subnet mask and gateway address; or see “6.6 Printing Reports/Lists” in “Part 1 Hardware” of the User Guide (Copier) to print out the System Settings List and then under TCP/IP in Communication Settings, check the IP address, subnet mask and gateway address. If the address has not been obtained automatically or to set the settings manually, see “1.3.1 Setting IP Address” (P. 14) for details for setting the address. You may also change the way to obtain the address. ● Use the DHCP server together with the Windows Internet Name Service (WINS) server. Check with your system administrator for any queries on the DHCP, WINS environments. ● When using the BOOTP server, change Get IP Address to BOOTP. For details on the way to change, see “5.6 Network Settings” in “Part 1 Hardware” of the User Guide (Copier). Check with your system administrator for any queries on the BOOTP environment. You may set the method of obtaining an address by using either the System Administration Mode through the touch panel display or the CentreWare Internet Services. ● For details on System Administration Mode, see “Chapter 5 System Administration Mode Settings” in “Part 1 Hardware” of the User Guide (Copier). ● For details on CentreWare Internet Services, see “Chapter 5 Configuring From Computer (CentreWare Internet Services)” (P. 105). Setting Printer Environment 13 1
Page 1 and 2: DocumentCentre C400/320/240 Series
Page 3 and 4: Preface Thank you for purchasing th
Page 5 and 6: Chapter 3 Basic Printing 3.1 Flow o
Page 7 and 8: 1.4 Configuring for Using Mailbox..
Page 9 and 10: Part 3 Appendix Appendix A Main Spe
Page 11 and 12: Using This Guide This section descr
Page 13 and 14: Conventions 1 In this guide, host m
Page 15 and 16: Switching Off Others ● When the p
Page 17 and 18: 1Setting Printer Environment 1.1 Pr
Page 19 and 20: 1.1.2 As Network Printer Windows ne
Page 21 and 22: Internet printing 1.1 Printer Envir
Page 23 and 24: Token Ring (option) 1.1 Printer Env
Page 25: 1.2 Connecting Interface Cable ●
Page 29 and 30: 3 Select System Settings. System Se
Page 31 and 32: 1.3 Setting IP Address 9 Enter the
Page 33 and 34: 1.4 Setting Port If the System Admi
Page 35 and 36: 9 Select Enable and then Save. 1. L
Page 37 and 38: PCL memory 1.5 Memory Allocation Th
Page 39 and 40: 2Setting up Network 2.1 Windows Net
Page 41 and 42: 2.1.2 Setting Procedure Procedure T
Page 47 and 48: 2.4 NetWare The network system kit
Page 49 and 50: Basic Printing 3 36 3.1 Flow of Pri
Page 51 and 52: Basic Printing 3 38 3.2 About Paper
Page 59 and 60: Basic Printing 3 46 3.3 This sectio
Page 61 and 62: Basic Printing 3 48 3.3 Printing Fe
Page 63 and 64: Basic Printing 3 50 3.4 Installing/
Page 69 and 70: Basic Printing 3 56 3.5 Switching P
Page 71 and 72: Basic Printing 3 58 3.6 Canceling P
Page 77 and 78:
Special Printing 4 64 4.1 Printing
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Special Printing 4 70 4.3 Secure Pr
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Special Printing 4 78 4.4 Sample Pr
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Special Printing 4 84 4.5 Delayed P
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Special Printing 4 90 4.6 Expanding
Page 105 and 106:
Special Printing 4 92 4.7 E-mail Pr
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Special Printing 4 98 4.8 Notify Jo
Page 113 and 114:
Special Printing 4 100 4.8 Notify J
Page 115 and 116:
Special Printing 4 102 4.10 File Up
Page 117 and 118:
5Configuring From Computer (CentreW
Page 119 and 120:
5.1.2 Structure Screen 5.1 About Ce
Page 121 and 122:
5.1.4 Target OS and Browsers 5.1 Ab
Page 123 and 124:
5.2.3 Proxy Server and Port Number
Page 125 and 126:
5.4 Activating This section describ
Page 127 and 128:
Part 2 Scanner
Page 129 and 130:
Setting Scanner Environment 118 1 1
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Documents for Scanning 144 2 2.1 Ab
Page 157 and 158:
146 2.1 About Documents Documents f
Page 159 and 160:
Documents for Scanning 2 148 2.2 Lo
Page 161 and 162:
Documents for Scanning 2 150 2.2 Lo
Page 163 and 164:
3Scanning With Mailbox 3.1 How to S
Page 165 and 166:
3.1 How to Scan 4 Select the mailbo
Page 167 and 168:
Canceling scan jobs in this machine
Page 169 and 170:
3.2 Canceling Scanning/Checking Job
Page 171 and 172:
Procedure 1 Load the document to be
Page 173 and 174:
3.3 Configuring Scan Settings 4 Sel
Page 175 and 176:
3.3 Configuring Scan Settings ● S
Page 177 and 178:
Procedure 1 Load the document to be
Page 179 and 180:
Procedure 1 Load documents in the H
Page 181 and 182:
3.3 Configuring Scan Settings 9 If
Page 183 and 184:
■When specifying Custom: 2 Using
Page 185 and 186:
4 Select Reduce/Enlarge on the Scan
Page 187 and 188:
3.3.8 Bound Originals Procedure 3.3
Page 189 and 190:
3.3 Configuring Scan Settings 5 Che
Page 191 and 192:
1 Load the document to be scanned.
Page 193 and 194:
3.3.10 Original Type Procedure 3.3
Page 195 and 196:
3.3.11 Lighter/Darker/Contrast Proc
Page 197 and 198:
3.3 Configuring Scan Settings 8 Pre
Page 199 and 200:
3.3.13 Image Compression Procedure
Page 201 and 202:
3.3.14 File Format You can set the
Page 203 and 204:
3.3 Configuring Scan Settings 6 Aft
Page 205 and 206:
3.4 Importing Scanned Data to Compu
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
3.5 Checking/Deleting Scanned Data
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
3.6 Changing Network Scanner Utilit
Page 221 and 222:
3.6 Changing Network Scanner Utilit
Page 223 and 224:
Import Settings Configures how to i
Page 225 and 226:
4Scanning With Job Template 4.1 How
Page 227 and 228:
2 Display the Basic Scanning screen
Page 229 and 230:
5E-mail Scanning 5.1 Scanning Docum
Page 231 and 232:
3 Under Save to, select E-mail. Bas
Page 233 and 234:
5.1.3 Registering Dial Directory Re
Page 235 and 236:
Changing/Deleting the registered co
Page 237 and 238:
5.1 Scanning Document to Send as E-
Page 239 and 240:
1Appendix A Main Specifications ...
Page 241 and 242:
A.2 Printable Area The print area w
Page 243 and 244:
Garamond Hlb Times Bd ITC A G Go Bk
Page 245 and 246:
C Precautions/Limitations C.1 SMB T
Page 247 and 248:
C.2 TCP/IP (LPD) The precautions/li
Page 249 and 250:
C.3 NetWare The precautions/limitat
Page 251 and 252:
Print control time C Precautions/Li
Page 253 and 254:
Restriction on scanning capacity C
Page 255 and 256:
D.2 Cannot Print D Troubleshooting
Page 257 and 258:
E Troubleshooting When Using TCP/IP
Page 259 and 260:
F Troubleshooting When Using NetWar
Page 261 and 262:
The number of paper definition spec
Page 263 and 264:
F.4 No Notification F Troubleshooti
Page 265 and 266:
H Automatic Gradation Adjustment Wh
Page 267 and 268:
Receive buffer Buffer is the locati
Page 269 and 270:
I wish to print with the same image
Page 271 and 272:
Index Numerics 100Base-TX..........
Page 273 and 274:
Stroke fonts.......................
Page 275:
DocumentCentre C400/320/240 Series
show all

User Guide (Printer/Scanner) - Fuji Xerox Worldwide

Create successful ePaper yourself

Delete template?

Save as template?