User Guide (Printer/Scanner) - Fuji Xerox Worldwide

3.6 Changing Network Scanner Utility Settings
Configure the necessary settings by referring to the explanation below:
Use network Selecting this item will search the scanners in the following
order. When the host name in respect of the IP address of
the connected scanner has been set, it will be displayed as a
scanner name.
1 “Hosts” file (without extension) in Windows system directory
● The Hosts file is in \Windows for Windows 95, Windows 98,
Window Me, in \Winnt\System32\drivers\etc for Windows NT
4.0, Windows 2000, and in \Windows\system32\drivers\etc for
Windows XP. However, the directory name in which Windows is
installed may differ according to the environment used.
● To display the host name using the Hosts file, open the Hosts file
with programs like Notepad, and separate the IP address and
the host name by adding a line.
2 DNS (Domain Name Server)
The domain name is also displayed when registering with
DNS. When the corresponding host name is not registered, it
is displayed as “Machine Name (IP address)”.
Use local file When this item is selected and the file is specified, the host
name described by the file is displayed as the scanner name.
Describe the file to be specified, in the same format as the
Hosts file format.
Example:
xxx.xxx.xxx.xxx DocumentCentre C400 Scanner
Other network scanners When you connect to scanners in other networks, configure
the setting as follows:
In order to connect to scanners in other networks, communication
by TCP/IP is needed.
1 Check the Display other network scanners check box,
and then click the Add button.
2
Enter the IP address of the scanner to be connected to
and the corresponding scanner name in the following dialog
box, and then click the OK button.
Scanning With Mailbox 3
209