User Guide (Printer/Scanner) - Fuji Xerox Worldwide

3.3.11 Lighter/Darker/Contrast
Procedure
3.3 Configuring Scan Settings
You can configure the density to scan documents. Even when Output Color has
been set to Full Color or Grayscale, you can still set the contrast.
● Lighter/Darker
Select from seven levels of density from Lighter to Darker. The closer to Darker, the darker is the
density of scan, and the closer to Lighter, the lighter is the scan.
● Contrast
Select from five levels of density from Higher to Lower. The closer to Higher, the greater the difference
between the bright and dark areas with the bright areas becoming brighter, and dark areas
darker. The closer to Lower, the smaller the difference between the bright and dark areas.
● You can change the default value of Lighter/Darker in the System Administration Mode. For details
on the way to change, see “5.8 Scan Mode Settings” in “Part 1 Hardware” of the User Guide
(Copier). The default value is set as Normal.
● You can change the default value of Contrast in the System Administration Mode. For details on the
way to change, see “5.8 Scan Mode Settings” in “Part 1 Hardware” of the User Guide (Copier).
The default value is set as Normal.
1 Load the document to be scanned.
“2.2 Loading Documents” (P. 147) for details on loading documents.
2 Display the Basic Scanning screen.
Basic Scanning
Scan Options
Image Quality/
File Format
3 Select the mailbox for saving the scanned data.
“3.1 How to Scan” (P. 154) for details on selecting the mailbox.
Menu
Scan to: Output Color Scan Resolution 2 Sided Originals
Auto 200dpi
1 Sided
Mailbox... Full Color
300dpi
2 Sided (H to H)
Grayscale
400dpi
2 Sided (H to T)
Job Template... Black
600dpi
More...
Scanning With Mailbox 3
185