User Guide (Printer/Scanner) - Fuji Xerox Worldwide

Scanning With Mailbox 3
168
3.3 Configuring Scan Settings
Usually, load the documents in the Head to Left orientation as shown in the following diagram.
6 After checking the setting, select Save.
The display will return to the Basic Scanning screen.
7 If necessary, configure other scan settings.
8 Press Start.
Scanning of the document will begin and the scanned data will be saved in the specified mailbox.
3.3.5 Mixed Size Originals
When the DADF is installed and used for scanning, documents of different sizes
can be scanned.
The options available for Mixed Size Originals are as follows.
● On
Select this to automatically detect the different sizes when scanning documents of mixed sizes. For
details on the sizes that can be detected automatically, see “2.1.2 Automatic Document Size Sensing”
(P. 145).
● Off
Select this when scanning documents of the same size.
When using the Mixed Size Originals feature, be sure to load A5-sized document in the portrait orientation
( ). Loading it in the landscape orientation may cause the document to jam or machine breakdown.
● You can change the default value of Mixed Size Originals in the System Administration Mode. For
details on the way to change, see “5.8 Scan Mode Settings” in “Part 1 Hardware” of the User
Guide (Copier). The default value is set as Off.
● When you use this Mixed Size Originals feature, be sure to set Scan Size of the Scan Options screen
to Auto Size Detect.
● If Reduce/Enlarge on the Scan Options screen is set as Auto % and size is specified in Output Size,
the documents will be automatically enlarged/reduced according to the specified size for scanning.
● If the size cannot be automatically detected, an error message will prompt you to enter the document
size.