User Guide (Printer/Scanner) - Fuji Xerox Worldwide

Scanning With Mailbox 3
166
3.3 Configuring Scan Settings
5 After checking the setting, select Save.
The display will return to the Basic Scanning screen.
6 If necessary, configure other scan settings.
7 Press Start.
Scanning of the document will begin and the scanned data will be saved in the specified mailbox.
3.3.4 Original Orientation
When the DADF is installed and used for scanning, you have to set Original Orientation
in order to specify the Head position of the document.
The options for Original Orientation are as follows:
Usually, load the documents in the “Head to Left” orientation. The scanned documents
will be retrieved as “Head to Top” orientation on the computer.
● Head to Left
Select this when you place the “Head” of the document at the left edge of the document glass or
DADF. Always select this for documents placed with the Head at the left edge (with texts of the horizontal
type).
● Head to Top
Select this when you place the “Head” of the document at the top edge of the document glass or
DADF.
● The orientation of the original document is not effected by the orientation of the scanned data.
● You can change the default value of Original Orientation in the System Administration Mode. For
details on the way to change, see “5.8 Scan Mode Settings” in “Part 1 Hardware” of the User
Guide (Copier). The default is set as Head to Left.