User Guide (Printer/Scanner) - Fuji Xerox Worldwide

3.1 How to Scan
4 Select the mailbox for saving the scanned data.
Selecting the button will display the previous screen and the button the next screen. You can
use the numeric keypad on the control panel to enter the mailbox number directly at Go to.
Mailbox Close
001 002 003 004
K Mailbox H Mailbox H Mailbox
(Not in Use)
005 006 007
008
(Not in Use) (Not in Use) (Not in Use) (Not in Use)
009 010 011 012
(Not in Use) (Not in Use)
(Not in Use) (Not in Use)
If there are documents in the mailbox, the number of documents saved in the mailbox will be displayed
on the bottom right of the screen in No. of Docs: once the mailbox is selected.
● If the password has been set, the screen to enter the password will appear. Enter the password and
then select the Confirm button. If you have forgotten the mailbox password, reset it in the System
Administration Mode.
● Selecting the mailbox and the Document List button will enable you to check documents saved in
the mailbox. After checking, select the Close button.
5 Select Close.
The display will return to the Basic Scanning screen.
6 If necessary, configure the scan settings.
(001 - 200)
“3.3 Configuring Scan Settings” (P. 160) for details on configuring the scan settings.
7 Press Start.
Scanning of the document will begin and the scanned data will be saved in the specified mailbox.
Go to
Document List
Mailbox Close
001 002 003 004
K Mailbox H Mailbox H Mailbox
005 006 007
(Not in Use)
(Not in Use)
009 010 011 012
(Not in Use) (Not in Use)
(Not in Use)
(Not in Use)
008
(Not in Use)
(Not in Use) (Not in Use)
Go to
(001 - 200)
Document List
No. of Docs: 10
Scanning With Mailbox 3
155