User Guide (Printer/Scanner) - Fuji Xerox Worldwide

2.1.2 Automatic Document Size Sensing
2.1 About Documents
This machine will automatically detect the document size when scanning. For
standard sizes in the table below, you do not need to specify the document size
for scanning.
Automatically detected
document sizes
For the following, the sizes on the left will be detected as sizes on the right:
On document glass:
For scanning documents of non-standard sizes, specify the document size in Scan Size on the Scan
Options tab. For details on entering the document size, see “3.3.6 Scan Size” (P. 171).
2.1.3 Special Documents to Note
This section describes the special documents to note.
Document glass
Document glass DADF
B6, B6 , B5, B5 , B4, A6, A5,
A5 , A4, A4 , A3, 8.5×11" ,
8.5×13", 8.5×14"
● 8×10" → B5 ● 8.5×13" → A4
● 8×10" → A4 ● 8.5×14" → A4
● 8×10.5" → A4 ● 11×15" → A3
B5, B5 , B4, A5 , A4, A4 ,
A3, 8.5×11", 8.5×11" ,
8.5×14", 11×17"
● 8.5×11"* → A4 ● 11×17" → A3
* For 8.5×11", the detected size can be changed according to the settings by the customer engineer.
In DADF:
● 11×15" → A3
For the following types of documents, an error message about the document size
not being detected automatically might be displayed or an image loss might
occur.
Resolve the problem by the suggested solution.
Documents for Scanning 2
145