User Guide (Printer/Scanner) - Fuji Xerox Worldwide

xii
Safety Notes
Read this section carefully before using the DocumentCentre 400/320/240 Series to ensure
that you operate your machine safely.
Also, refer to the “Safety Notes” section of the User Guide (Copier).
This section explains the graphic symbols used in this guide.
is used to alert operators to an operating procedure, practice or
condition that, if not strictly observed, may result in severe injury
or loss of life.
is used to alert operators to an operating procedure, practice or
condition that, if not strictly observed, may result in safety
hazards to personnel or damage to the equipment.
This symbol is used to alert operators to a
specific operating procedure that requires close
attention. Read and follow instructions carefully
to ensure the task is accomplished safely.
This symbol is used to alert operators to a
specific operating procedure that must not be
performed. Read instructions carefully and do
not perform any procedures that are prohibited.
This symbol is used to alert operators to a
specific operating procedure that must be
emphasized in order to operate the machine
safely. Read and follow instructions carefully.
Power and Earth Connections
Switch off the machine and the computer before connecting the interface cable. Connecting
the cable or cord with a live machine and computer can cause electric shocks.