User Guide (Printer/Scanner) - Fuji Xerox Worldwide

Setting Scanner Environment 122
1
1.4
Configuring for Using
Mailbox
To scan with the mailbox, configure the following settings on this machine:
● set IP address
● activate the port for scanning (salutation)
● create a mailbox for saving scanned documents
1.4.1 Setting IP Address
For details on setting IP address, see “1.3 Setting IP Address” (P. 13) in “Part 1
Printer”.
If an IP address has already been set for the printing function, you do not need to
do any setting here.
1.4.2 Activating Port for Scanning (Salutation)
This section describes the procedure to set the port for scanning (salutation) to
Enabled (default: Disabled).
You can activate the port by using either the System Administration Mode
through the touch panel display or the CentreWare Internet Services.
● “Chapter 5 System Administration Mode Settings” in “Part 1 Hardware” of the User Guide
(Copier) for details on System Administration Mode.
● “5.6.1 Port Settings” in “Part 1 Hardware” of the User Guide (Copier) for details on the ports that
can be set.
● “Chapter 5 Configuring From Computer (CentreWare Internet Services)” (P. 105) in “Part 1
Printer” for details on CentreWare Internet Services.
The following describes the procedure of using System Administration Mode as
an example.