You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2<br />
1-800-248-0638<br />
Sale Price<br />
$ <strong>21995</strong> Our ATS Engine Stand is easily assembled with<br />
a few nuts and a 1/2” wrench, so within minutes<br />
your good to roll. Speaking of rolling, our<br />
unit has locking casters so you don’t have to<br />
worry about your engine running away. ATS<br />
used a sturdy tripod design to give you the<br />
best support of up to 1200lbs. We have<br />
also included an adapter for Continental<br />
and Lycoming engines. (Radial engines<br />
may require an optional spline adapter<br />
(p/n W670985-20). This ATS exclusive is<br />
a perfect addition to any shop!<br />
No. 65530CX ..................... $239.95<br />
ATS PRO AIRCRAFT ENGINE STAND<br />
(WITH LOCKING CASTERS)<br />
Lifetime Warranty
Spark Plug<br />
<strong>Tool</strong>s<br />
SPARK PLUG VIBRATOR CLEANER<br />
$ 29<br />
95<br />
This tool will do the same job as a more expensive<br />
vibrator cleaner at a fraction of the cost. It removes<br />
heavy deposits in and around the electodes with no<br />
risk of damage to the plug.<br />
No. PA01 ..................................................... $35.95<br />
No. PA01-1 ......... Replacement Blade .......... $5.95<br />
SPARK PLUG TORQUE WRENCH<br />
$105 95<br />
You Save<br />
$14.00<br />
Precision (click-style) torque wrench is accurate to<br />
within +/- 3% (clockwise in upper 80% of range). The<br />
drive head is a sealed teardrop design that provides<br />
ease of access, strength, and keeps out contaminants.<br />
The drive reverses direction at the flick of a lever,<br />
and the micrometer twist lock securely holds your<br />
torque settings even under heavy use.<br />
No. KDS85052 ........................................... $119.95<br />
MAGNETIC SPARK PLUG SOCKET<br />
$21 95<br />
You Save $8.00<br />
Don’t you hate it when you drop your spark plug<br />
down into your engine and it cracks, or your socket<br />
just doesn’t fit where you need it to. Well you don’t<br />
have to worry any more, ATS has the only Spark Plug<br />
Socket with that perfect fit. It is thinned walled to<br />
reach down into tight space and with a magnetic<br />
grip you wont be dropping your expensive Champion<br />
or Autolite Spark Plugs again.<br />
No. ATS950 .................................................. $29.95<br />
SPARK PLUG THREAD CHASER<br />
$6 95<br />
Cleans spark plug<br />
port threads of dirt<br />
and carbon build<br />
up. Double ended for both 14mm and 18mm holes.<br />
No. 20200 ..................................................... $7.95<br />
HEAVY DUTY SPARK PLUG GAPPER KIT<br />
Lifetime Warranty<br />
ATS483<br />
ATS420<br />
ATS482<br />
A complete spark plug gapping solution for field or<br />
bench use. Includes our ATS420 Heavy Duty Spark<br />
Plug Gapping <strong>Tool</strong> to accurately set your spark plug<br />
gaps to within 0.001”. You also get a set of wire feeler<br />
gauges (p/n ATS450) to verify gap size. If you should<br />
happen to accidentally over-gap the plug, then the<br />
included Gap Expansion <strong>Tool</strong> (p/n ATS483) will get<br />
you back on track. And finally, we’ve included an<br />
Electrode Erosion Gauge (p/n ATS482) to make sure<br />
that your gapped plugs are still in serviceable condition.<br />
No. ATS420DX ..........(Complete Kit) ............. $54.95<br />
No. ATS420 ..................(Gapper) ................. $29.95<br />
No. ATS420K ......(w/ Gapper & Gauge) ....... $34.95<br />
No. ATS483 ............ (Expansion <strong>Tool</strong>) ........... $14.95<br />
No. ATS482 ............ (Erosion Gauge) ............. $5.95<br />
$49 95<br />
You Save<br />
$10<br />
ATS SPARK PLUG GAPPER<br />
A low-cost efficient gap setting tool for closing gaps<br />
on massive electrode-type aviation spark plugs. Can<br />
be hand held, bench mounted, or held in a vise.<br />
Complete with one adapter for 18mm spark plugs,<br />
and one adapter for REM37BY plugs. Includes the<br />
ATS450 retractable gap gauge.<br />
No. ATS415K ................................................ $59.95<br />
SPARK PLUG CLEANER<br />
$21 95<br />
Cleans any size plug without<br />
changing grommet.<br />
Has 2-way valve (blast<br />
or air) and comes complete<br />
with abrasive powder.<br />
Ready to use.<br />
No. 12 ....................(Complete Unit)............ $25.95<br />
No. 78B ...........(Replacement Abrasive) ....... $2.50<br />
SPARK PLUG GAPPING KIT<br />
Save 30%<br />
$15 95<br />
Works with all 18mm massive electrode aircraft spark<br />
plugs. Wire gauge sizes: .015, .018, .020, .022, .028,<br />
.030.<br />
No. 116K ..................................................... $22.95<br />
3<br />
www.aircraft-tool.com
4<br />
1-800-248-0638<br />
ATS DELUXE SPARK PLUG<br />
CLEANER/TESTER<br />
$ 529 95<br />
Our new Spark Plug Cleaner & Tester features<br />
the latest developments in spark plug service<br />
equipment. It’s smart, functional styling combined<br />
with rugged construction makes it the<br />
perfect choice for anyone who needs to reliably<br />
and accurately check the quality of used<br />
spark plugs. The cleaner section uses a powerful<br />
blast of air and abrasive to thoroughly<br />
remove carbon deposits from plugs. The recessed<br />
observation mirror is perfectly angled to<br />
display the electrodes of the spark plug so that<br />
you can clearly judge the quality of the spark<br />
as the plug is being tested. It is manufactured<br />
to the rigorous ISO 9002 standard and carries<br />
a full one-year warranty. Includes adapters for<br />
12mm, 14mm, and 18mm plugs. Test plugs at<br />
24,000 volts and up to 150 psi to simulate engine<br />
conditions.<br />
Note: The SPCT100A will not remove lead deposits from<br />
spark plugs. The proper way to remove lead deposits is by<br />
using the <strong>Aircraft</strong> <strong>Tool</strong> <strong>Supply</strong> Vibrator Cleaner (p/n PA01).<br />
No. SPCT100A ..............120/240V ............... $579.95<br />
Our new Deluxe<br />
Spark Plug Cleaner<br />
Kit is perfect<br />
for aviation shops<br />
that need to do<br />
spark plug maintenance<br />
on a<br />
regular basis, or<br />
for the do-it-your-<br />
Save<br />
$ 50 00<br />
DELUXE SPARK PLUG KIT<br />
$ 649 95<br />
Save<br />
$ 50 00<br />
selfer who wants to do more hands-on maintenance<br />
to save some money.<br />
Our kit includes the ATS415K Bench Gapping <strong>Tool</strong><br />
with Gap Gauge; the #12 Spark Plug Cleaner;<br />
the PA01 Spark Plug Vibrator Cleaner to remove<br />
lead deposits; a Spark Plug Tray; a 10X Inspection<br />
Magnifier; a 4oz Bottle of Anti-Seize Lubricant;<br />
a box of 100 Copper Gaskets; a Thread<br />
Chaser; and our new ATS950 Magnetic Spark<br />
Plug Socket.<br />
And rounding out this winning kit is our best-selling<br />
SPCT100A Spark Plug Cleaner Tester Unit that<br />
will check plugs under simulated high voltage/<br />
high pressure conditions for spark quality and<br />
leakage.<br />
No. SPK-DX ................................................ $699.95
Save<br />
ATS ENGINE TEST KIT<br />
$ 30 00 Lifetime Warranty<br />
$ 269 95<br />
Ever wonder how the Pros time their engines so efficiently? They<br />
use our ATS Engine Timing Kit. It has everything you need, including<br />
our ATS Pro Differential Pressure tester that everyone<br />
loves. And to make things easier we’ve included our new Extension Tube (18MM-XT) for<br />
your new tester. ATS has also put in the LED52 Digital Magnito Synchronizer and E25 Timing<br />
Indicator to make timing you mags a synch. Plus, don’t forget to check your cables with<br />
the E5 cable tester, and to round this kit out, we’ve thrown in a rugged high impact tool box<br />
so you can keep your tools organized while you’re out there doing your annual like a pro.<br />
No. EK5EM ........................................ (Complete Kit) .......................................... $299.95<br />
ATS PRO DIFFERENTIAL PRESSURE TESTER<br />
Lifetime Warranty<br />
$ 89 95<br />
Save $10<br />
Our new 2EM Pro Differential Cylinder Pressure Tester<br />
has been improved to make it the best quality<br />
tester available. The all-metal gauges are accurate<br />
to +-2%, the regulator is a Watts Micro Regulator,<br />
and the orifices are drilled and precisely<br />
reamed to an accuracy of .0001”. That is why<br />
it carries the ATS Pro Lifetime Warranty. The builtin<br />
Master Orifice section is made to the same<br />
specification as our 6469 Master Orifice and fully<br />
meets the requirements of Continental’s SB03-3<br />
Service Bulletin. Comes with complete instructions.<br />
Includes hose and spark plug adapter.<br />
Note: ATS Pro Lifetime Warranty does not cover<br />
annual calibrations, as required by FAA.<br />
No. 2EM ................with Maser Orifice ..... $99.95<br />
No. 2EM-60 .............. Over 5” Bore ......... $89.95<br />
No. 2E .................. w/o Master Orfice ..... $69.95<br />
HOLIDAY BONUS: Order any ATS tester and get a FREE coupon<br />
for 5 years of annual calibrations. A $100.00 value!<br />
MAGNETO LOCKING PINS<br />
Bendix<br />
No. ML20 ......................(Bendix) .................... $5.95<br />
No. T118 .........................(Slick) ..................... $3.95<br />
29<br />
$ 95<br />
each<br />
MAGNETO TIMER<br />
This tool simplifies magneto timing on TCM (Continental)<br />
series 470, 520, and 550 engines. No protractor<br />
on the spinner required, or other complicated<br />
tooling. Simply place it over the prop nuts and sight<br />
down the casing split to set the timing. That’s all there<br />
is to it. It’s foolproof. Comes with instructions right on<br />
the tool for easy reference.<br />
No. CCMT-01 ............................................... $35.95<br />
P-LEAD TEST ADAPTERS<br />
Slick<br />
Provides an easy way<br />
to connect your mag<br />
synchronizer to the P-<br />
Leads of Bendix magnetos for testing. One pair per<br />
package.<br />
No. 8765 ..............Early S4, S6, & S20 .......... $35.95<br />
No. 8766 ............... All other S-Mags ........... $35.95<br />
No. 8767 ................D2000 & D3000 ............ $35.95<br />
MAGNETO SYNCHRONIZER<br />
$ 95 45<br />
Designed to synchronize aircraft magnetos to the<br />
engine. Provides a greater timing accuracy. Attach<br />
three clips to the magnetos and adjust until both<br />
bright lights flash in synch and the buzzer sounds.<br />
No. LED52 ................ Dual Channel ............. $49.95<br />
5<br />
www.aircraft-tool.com
6<br />
1-800-248-0638<br />
T60 CABLE TENSIOMETER<br />
The T60 is an industry and military grade tensiometer<br />
accurate to within 5%. Simple, comfortable lever<br />
grip permits one handed operation without operator<br />
fatigue. In severe cold, service mittens or gloves<br />
may be worn without any loss in efficiency of operation.<br />
Additional features include a positive 3-point<br />
cable grip system to prevent dislodgement when<br />
the instrument is hanging free on the control cable.<br />
• 10-200 lbs on cable sizes: 1/16”, 3/32”, and 1/8”<br />
• 30-200 lbs on cable sizes: 5/32”, and 3/16”<br />
• 80-200 lbs on cables sizes: 7/32”, and 1/4”<br />
• USAF C8 equivalent<br />
• Direct reading - no conversion charts needed<br />
• Calibration bar included to verify accuracy before use<br />
T5 COMPACT CABLE TENSIOMETER<br />
Range 1-150lbs. Cable sizes: 1/16”-1/4”.<br />
The extremely small size of this tensiometer<br />
allows entry through small openings,<br />
and permits accurate readings on<br />
cables located in confined areas. Each<br />
instrument is calibrated at the factory<br />
and is provided with its own calibration<br />
chart for the simple conversion of read-<br />
Model: T5-2002-101-00<br />
ings into pounds of tension. The chart also<br />
indicates the risers that must be used to<br />
accommodate various sizes and tensions. This tool is so easy to use that the entire testing operation can be<br />
done with one hand in a matter of seconds.<br />
No. MC257 ....................................................................................................................................... $895.95<br />
915<br />
$ 95<br />
No. T60-1001-C8 ................................................ (10-200lbs) ........................................................... $935.95<br />
No. T60-1001-C9 ...........(150-450lbs).....(5/32”, 3/16”, 7/32” & 1/4” cable sizes only) ...................... $945.95<br />
$ 189 95<br />
YOUR CHOICE!<br />
Your Choice!<br />
Sale Price<br />
$ 86995 ECONOMY CABLE TENSIOMETERS<br />
Low cost, high quality and accurate. It’s compact<br />
enough to fit through inspection holes. Factory calibrated.<br />
• Borroughs Type 3375 • Range 15-70 lbs<br />
• 1/16” to 1/8” cables • 2 percent accuracy<br />
• Compact design • Calibration cert.<br />
No. 3375D ................................................. $199.95<br />
• Borroughs Type 3375 • Range 50-350 lbs<br />
• 5/32” & 3/16” cables • 2 percent accuracy<br />
• Compact design • Calibration cert.<br />
No. 3375G ................................................ $199.95<br />
TB02<br />
CONTROL CABLE RIGGING KIT<br />
ADE4U<br />
$ 3795<br />
Save $800 This kit is a real timesaver that will let you adjust turnbuckles<br />
quickly and with minimum effort. You’ll get a<br />
complete solution consisting of our Turnbuckle Rigging<br />
<strong>Tool</strong> (ADE4U) to hold the terminal ends of the<br />
turnbuckle in place and keep the cable from twisting<br />
as you turn the barrel with the Turnbuckle Wrench<br />
(TB02). The wrench clamps around the barrel and<br />
gives you the leverage to effortlessly adjust it.<br />
No. TBR-KIT.....(complete kit) ........................ $45.95<br />
No. ADE4U.....(rigging tool) .............. $18.95 $15.95<br />
No. TB02........(wrench only) ............. $29.95 $25.95<br />
PRO360 DIGITAL PROTRACTOR<br />
$ 229 95<br />
The PRO360 is the mechanic’s choice for digital protractors.<br />
Engineered to be accurate to within 0.1 degrees,<br />
and operates in a full 360 degree orbit, so that<br />
you can use it in any position. Display-hold feature<br />
lets you take “snapshot” readings in even the most<br />
awkward situations. The “zero angle reset” feature is<br />
great for taking relative angular readings, which is<br />
exactly what you need when setting your flaps and<br />
ailerons. Large LCD readout.<br />
No. PRO360 ............................................... $249.95<br />
No. DP82201B .............Economy ..... $99.95 $95.95<br />
TRUTACH II DIGITAL<br />
PROPELLER TACHOMETER<br />
$ 199 95<br />
You Save<br />
$16.00<br />
The new all digital TruTach II measures propeller RPM<br />
to 1 RPM accuracy. It features a digital signal filter<br />
that eliminates noise and gives solid readings. Works<br />
on single or multi-engine propeller aircraft with 2, 3,<br />
4 or 5 blades, and never needs adjustment. RPM<br />
Range 240 - 7000 RPM. 3.8 x 2.4 x 1.5 inches. Weighs<br />
just 4 ounces. Includes carrying case.<br />
No. TRUTACH2 ............................................ $215.95
Combo Kit<br />
$ 57995<br />
TIMERITE®<br />
What makes the TimeRite so effective is<br />
its simplicity. By using specialized arms<br />
and calibrated scales, the TimeRite<br />
accurately locates Top Dead Center<br />
(TDC) and then enables you to set the<br />
timing angle with dead-on accuracy.<br />
ATS is the proud manufacturer of the<br />
TimeRite since acquiring all rights in<br />
1985. Each unit is precisely assembled<br />
by hand and tested to the strictest<br />
standards at our plant in the USA to<br />
preserve the original craftsmanship<br />
that has made it so famous. No detail<br />
is overlooked--from its polished Bakelite<br />
cap right down to its signature doublechrome<br />
finish.<br />
It’s no wonder that mechanics today<br />
treat their 50 year old TimeRites like a<br />
precious collector’s item, passing them<br />
down from father to son. It’s a classic<br />
that is truly timeless...<br />
No. I200BCK ...............Combo Kit .............. $619.95<br />
No. I200B18K ...............18MM Kit ............... $499.95<br />
Lifetime Warranty<br />
ATS is the exclusive manufacturer of TimeRite®.<br />
7<br />
www.aircraft-tool.com
8<br />
1-800-248-0638<br />
Features<br />
• Record and play back still images and video clips<br />
• 3.5 “ high resolution full color LCD display (320x240)<br />
• With removable SD cards, save images and videos to take<br />
with you anywhere<br />
• Narrow probe diameter available in either 8.5mm (0.33”) or<br />
5.5mm (0.22”) and fits most spark plug holes<br />
• White LED to illuminate the inspection area, with illumination<br />
control<br />
• View objects as close as 1”<br />
• 1M (39.4”) semi-rigid, but flexible watertight shaft<br />
• Built-in rechargeable Li-ion battery with up to 5-6 hours of<br />
continuous use<br />
ATS DIGITAL RECORDING<br />
VIDEOSCOPE<br />
Actual image of spark<br />
plug inside cylinder<br />
taken with MV-201<br />
Sale Price<br />
$ 24595 Lowest Price<br />
of the Year!<br />
Magnet Tip<br />
Hook Tip<br />
Mirror Tip<br />
FREE<br />
Thanks to the wonder of digital miniaturization,<br />
we now have pinhead-sized video cameras<br />
with resolutions equal to, or better than the<br />
best fiberscopes of a few years ago. The MV-<br />
201 incorporates this technology to produce<br />
a videoscope of superior quality. Its 640x480<br />
camera is only 1mm across, but delivers res- 2GB SD CARD<br />
olution equivalent to a fiberscope with over<br />
300,000 fibers. Compare this to the best fiberscopes of a few years<br />
ago, which had only about 20,000 fiber pixels, and you’ll begin to<br />
see why videoscopes are the way of the future. But the real power of<br />
this videoscope is its built-in digital recorder that writes real-time video<br />
or still pictures directly to an SD card. You can record your inspections<br />
in the field and review them at your leisure. No more overlooking<br />
critical issues because you were pressed for time. Simply record and<br />
review, and you’ll never miss spotting a corrosion point or a fracture<br />
line again.<br />
No. MV-201 ........................................................................ $279.95
ATS PRO PALM DRILL<br />
FLAT OFFSET DRILL ATTACHMENT<br />
$ 20995<br />
$109 95<br />
Introductory Price!<br />
Order now for delivery January 2013<br />
to take advantage of sale pricing.<br />
Our new Pro Palm Drill is only 7” long yet has all of the features of a full<br />
sized drill. It delivers up to .5HP of power, and the trigger is fully feathered<br />
allowing for very precise speed control. It runs smoothly and quietly<br />
even when operating at top speed. Carries a full 1 year warranty.<br />
• 1/2HP at operating speed • 90 psi operating pressure<br />
• True variable speed trigger • 1/4” Jacobs Chuck<br />
No. ATS61100 ................... 2600 RPM ..................$129.95<br />
No. ATS61101 ................... 4000 RPM ..................$129.95<br />
New!<br />
ATS PALM DRILL<br />
$69 95<br />
Save 30%<br />
This is the drill I wish I had when I was<br />
still out there hauling a toolbox. It has<br />
everything a proper drill should have:<br />
speed, durability, and flexibility. The<br />
nice part is that this feather-light gem is<br />
small enough to literally fit into your back<br />
pocket. A real work of art! With two stage<br />
trigger and 2,800 RPM free speed.<br />
No. ATS6100 ................................................ $99.95<br />
Designed with a<br />
head thickness of<br />
only 7/16” for drilling in<br />
areas as close as 1”. Fits any air<br />
or electric drill. Accepts 1/4x28 threaded<br />
drill bits and other accessories for close<br />
quarter drilling. 6-5/8” long, 7/16” head<br />
thickness, 2-5/16” offset distance, 7/16” side<br />
to center. Drill capacity is 1/4”.<br />
No. T235 .................................................... $219.95<br />
$46 95<br />
Save 30%<br />
New!<br />
ATS PRO REVERSIBLE<br />
PALM DRILL<br />
$115 95<br />
Introductory Price!<br />
Order now for delivery January 2013<br />
to take advantage of sale pricing.<br />
This is one of the smallest reversible drill on the market that features a<br />
full feathering trigger. It’s just over 7” long and delivers .5HP of power<br />
to drill through even the toughest materials. The fully variable trigger<br />
gives you total control over the speed all the way from 0 to 2000<br />
RPM. Very smooth running and quiet operation. Full 1 year warranty.<br />
• 1/2HP at operating speed • 90 psi operating pressure<br />
• Positive reverse mechanism • 1/4” Jacobs Chuck<br />
• True variable speed trigger • Rubber grip handle<br />
No. ATS61100R ................. 2000 RPM ..................$135.95<br />
ATS HIGH SPEED PALM DRILL<br />
ATS HD AIR DRILL<br />
$ 99 95<br />
High speed 5,000 rpm palm drill cuts<br />
cleanly though aluminum, composites,<br />
and even tough metals such as<br />
Titanium. Planetary gears for smooth<br />
operation. 1/4” chuck. Only 6” long.<br />
90 psi pressure.<br />
No. ATS6100B ............................................ $119.95<br />
With a speed of 26,000 RPM<br />
and .67 hp of power, our new<br />
heavy duty drill can take on any<br />
job. Highest quality full cage gear design<br />
ensures that this drill keeps running<br />
smoothly even under hard abuse. 3/8”<br />
jacobs chuck and an ergonomic design<br />
for maximum comfort.<br />
No. ATS6101 ................................................ $65.95<br />
ATS 90 DEGREE ANGLE DRILL<br />
Save $30.00<br />
ATS 90° COMPACT ANGLE DRILL<br />
Jiffy Head<br />
$ 32995<br />
With a head height of only .937” our compact drill<br />
will get into those extremely close-quarter areas other<br />
drills simply can’t. Runs at 3,500 RPM and delivers<br />
.33 hp using 90 psi. Accepts 1/4 x 28 threaded drill<br />
bits & attachments. 9” OAL.<br />
No. 775 ......................Jiiffy Head .............. $349.95<br />
No. 775A ...........Pan American <strong>Tool</strong> Head ......$279.95<br />
ATS HD REVERSIBLE AIR DRILL<br />
$5495 Save $21.00<br />
One of the few reversing air drills<br />
that has all of the right features in<br />
one tool: great speed, solid construction,<br />
and a reversing mechanism<br />
that really works! 3/8” Jacobs chuck,<br />
2,400 RPM with variable speed control.<br />
No. ATS6104 ..................$75.95<br />
$ 22995<br />
Your Choice!<br />
The head height of our newest angle drill is just a<br />
little over an inch, and it produces enough torque<br />
at 2,800 RPM to drlll through steel. Excellent speed<br />
control, with a solid, well-balanced feel. Accepts 1/4<br />
x 28 threaded drill bits. 10” OAL<br />
No. ATS6132 ................. 90° Drill ................ $259.95<br />
No. ATS6131 ..................45°Drill ................. $259.95<br />
ATS REVERSIBLE PALM DRILL<br />
Our palm drill is only<br />
6’’ long and is fully<br />
reversible. Runs very<br />
smoothly at 2,200<br />
RPM’s thanks to its<br />
planetary gear sys-<br />
$89 tem. Features a<br />
comfort grip cushion<br />
handle.<br />
• 2,200 RPM Free Speed<br />
• 1/4” Jacobs Chuck<br />
• 90 psi operating pressure<br />
• Two-Stage Speed Control Trigger<br />
• Reverse flip lever for one-handed operation<br />
No. ATS6100F............................................... $99.95<br />
95<br />
9<br />
www.aircraft-tool.com
10<br />
1-800-248-0638<br />
Deluxe Riveting Kit<br />
$ 879 95<br />
Save $100<br />
Do you want to build like a pro? Or<br />
are you an experienced builder that<br />
wants to take things up to the next<br />
level? Then this is the kit for you. It has<br />
150 pieces of fun new toys for you to<br />
play with including two of our ATS Pro<br />
line tools. This is the type of kit that<br />
will keep you in your hangar for hours,<br />
playing like the big boys.<br />
135-3XKT ............3X Gun ......... $979.95<br />
QTY PART # DESCRIPTION QTY PART # DESCRIPTION QTY PART # DESCRIPTION<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
20<br />
20<br />
20<br />
20<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
KMC-1022<br />
140<br />
141<br />
142<br />
147<br />
148<br />
K-3/32<br />
K-1/8<br />
K-5/32<br />
K-3/16<br />
131<br />
470-3-3/32<br />
470-3-1/8<br />
470-3-5/32<br />
470-3-3/16<br />
0470-3-3/32<br />
0470-3-1/8<br />
0470-3-5/32<br />
0470-3-3/16<br />
750<br />
10L<br />
10R<br />
Homark 22” <strong>Tool</strong>box<br />
Bucking Bar<br />
Bucking Bar<br />
Bucking Bar<br />
Bucking Bar<br />
Bucking Bar<br />
Clecos (silver)<br />
Clecos (copper)<br />
Clecos (black)<br />
Clecos (gold)<br />
Cleco Pliers<br />
Rivet Set (AN470, 3/32”)<br />
Rivet Set (AN470, 1/8”)<br />
Rivet Set (AN470, 5/32”)<br />
Rivet Set (AN470, 3/16”)<br />
Offset Rivet Set (3/32”)<br />
Offset Rivet Set (1/8”)<br />
Offset Rivet Set (5/32”)<br />
Offset Rivet Set (3/16”)<br />
Flush Rivet Set<br />
Offset Snip (left cut)<br />
Offset Snip (right cut)<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
ATS6104<br />
DS-12<br />
DS-21<br />
DS-30<br />
DS-40<br />
A601<br />
1824<br />
130<br />
64823<br />
1SDY<br />
ATSRS-N1SDY<br />
61<br />
62<br />
63<br />
65<br />
FP10<br />
SP2005<br />
ATB8362<br />
5000-40<br />
5000-30<br />
5000-12<br />
Rev. Air Drill (3/8” chuck)<br />
Drill Stop (3/16)<br />
Drill Stop (5/32)<br />
Drill Stop (1/8)<br />
Drill Stop (3/32)<br />
Angle Drill Attachment<br />
Air Regulator<br />
Rivet Cutter<br />
Hand Nibbler<br />
1 1/2” Yoke<br />
Narrow Quaters Yoke<br />
Strap Duplicator (3/32)<br />
Strap Duplicator (1/8)<br />
Strap Duplicator (5/32))<br />
Strap Duplicator (3/16)<br />
Fluting Pliers<br />
Chip Chaser<br />
Standard Handbook<br />
Threaded Drill Bit (3/32)<br />
Threaded Drill Bit (1/8)<br />
Threaded Drill Bit (3/16)<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
5000-21<br />
ATSRS-3SD<br />
4263DP-2<br />
4264DP-2<br />
4265DP-2<br />
4266DP-2<br />
4703-2<br />
4704-2<br />
4705-2<br />
4706-2<br />
4710-2<br />
3710-2<br />
06785<br />
133<br />
1000-100-40<br />
1000-100-30<br />
1000-100-12<br />
1000-100-21<br />
ATS-3X<br />
4187<br />
12A<br />
Threaded Drill Bit (5/32)<br />
Hand Rivet Squeezer<br />
Dimple Die Set (3/32)<br />
Dimple Die Set (1/8)<br />
Dimple Die Set (5/32”)<br />
Dimple Die Set (3/16”)<br />
Squeezer Set (3/32”)<br />
Squeezer Set (1/8”)<br />
Squeezer Set (5/32”)<br />
Squeezer Set (3/16”)<br />
Squeezer Set (FLUSH 1/2”)<br />
Squeezer Set (FLUSH 3/8”)<br />
Dimple Die Organizer<br />
Stop Countersink<br />
Piloted Cutter (3/32)<br />
Piloted Cutter (1/8)<br />
Piloted Cutter (3/16)<br />
Piloted Cutter (5/32)<br />
Ats Pro Rivet Gun<br />
Dimple Die Block<br />
Rubberguard Flush Set
$ 1,395 95<br />
Save Over $130!<br />
RV-12 Quick Build Kit<br />
Our newest kit contains all the tools<br />
you need to build Van’s exciting new<br />
RV-12 Quickbuild Kit. The new RV-12<br />
has become an instant favorite of Save $100!<br />
Light Sport Aviation (LSA) kitplanes<br />
because it’s so remarkably easy to assemble. It requires virtually<br />
no sheet metal skills, and needs little more than a few hand tools.<br />
We’ve made your task even easier by bringing together all the tools<br />
you’ll need into one complete kit, and priced it to be easy on your<br />
wallet. You won’t find any “fluff” tools that you don’t really need to<br />
over inflate the price of our kit--every tool you see here, you will use<br />
at some point in your construction. Our kit is based on Van’s recommended<br />
tool list, as well as recommendations from our customers.<br />
RV12-KIT .......................................3X Gun ................................$1295.95<br />
RV Builder’s Kit<br />
The RV Builder’s Kit has been completely revised to conform to Van’s recommended tool list for their very<br />
popular line of RV homebuilt airplanes. It contains all of the tools and equipment needed to successfully<br />
assemble Van’s <strong>Aircraft</strong> RV-3/3B, RV-4, RV-6/6A, RV-8/8A, RV-9/9A, and the newer RV-7/7A and RV-10 series<br />
homebuilt airplanes.<br />
RVK-3X ....................................................................... 3X Gun ....................................................................... $1,529.95<br />
$ 1,195 95<br />
RV Builder’s Starter Kit<br />
$ 699 95<br />
This scaled down version of our RV<br />
Builder’s Kit contains just the tools<br />
you need to get your feet wet with<br />
sheet metal construction. The kit Save Over $75!<br />
closely follows the recommended<br />
tool list from Van’s RV TRAINING PROJECT-1 and their TOOL BOX KIT<br />
projects. This kit is also has the minimum recommended set of tools<br />
to build the empennage (tail) section of the RV3, RV4, RV7, RV8, RV9,<br />
and RV10 series of home built airplanes. Start out with this kit, and<br />
when you’re ready to do more advanced work, get the upgrade<br />
package to take you all the way up to the full RV Builder’s <strong>Tool</strong> Kit.<br />
RVS-3X ........................................... 3X Gun .................................$775.95<br />
11<br />
www.aircraft-tool.com
12<br />
1-800-248-0638<br />
$ 249 239 95<br />
Save $20.00 $30.00<br />
SUPER-DUTY SQUEEZER KIT<br />
If you’re a sheet metal professional/hobbyist who demands nothing less than the very best in his or<br />
her tools then read on... This kit features the best of everything we have to offer. Our ATS Super-Duty<br />
Rivet Squeezer is built from solid Stainless Steel for hard use, the best medium-duty squeezer on the<br />
market today, with a 1-1/2” and a 3” yoke included; the 17 piece Dimple Die and Squeezer Set are<br />
made from 4160 tool steel, hardened, and polished to a mirrorlike finish. The high-leverage design<br />
easily squeezes rivets up to 5/32” dia. The adjustable ram eliminates the need for shims. And finally,<br />
we’ve included a set of Rivet Gauges to ensure that you get professional results. This kit is designed<br />
to last a lifetime. It has the best of everything at a price that won’t break your budget.<br />
No. SDRS-KIT ...............................(Complete Kit) .................................... $269.95<br />
No. ATSRS-3SD .................... (3” Rivet Squeezer Only) ............................... $99.95<br />
No. ATSRS-1SD ................. (1-1/2” Rivet Squeezer Only) ............................ $89.95<br />
$ 159 95<br />
Save $20.00<br />
DIMPLING & RIVETING TOOL<br />
New 22-1/2”x4” deep throat handles just about any dimpling or riveting job. Great for RV Kit builders. Heavy<br />
duty steel frame. Uses dimple & die or rivet sets with a .187” shank. Includes extension shaft, die holder, and<br />
automatic spring return. New “hammer-tone” finish.<br />
No. 204RV ........................................................................................................................................ $179.95<br />
$ 24 95<br />
6 PIECE SQUEEZER SET<br />
1/4” body length. Complete set includes 3/32”, 1/8”,<br />
5/32”, and 3/16” universal head sets plus 2 flush sets.<br />
Standard .187” shank. Includes a convenient holder.<br />
No. 3456-2 .................................................. $29.95<br />
$ 5 95 Save<br />
$3.00<br />
100° POP DIMPLE DIES<br />
Something new for dimpling 3/32” and 1/8” holes<br />
with any pop riveter. forms a perfect 100 degree<br />
dimple every time and can be used over and over.<br />
No. 5102D-3/32 .............(3/32”) ..................... $8.95<br />
No. 5102D-1/8 ................(1/8”) ...................... $8.95<br />
17 PC SQUEEZER & DIMPLE DIE SET<br />
$ 99 95<br />
An assortment of 17 squeezer and dimple die sets<br />
in a convenient holder. Includes squeezers & dies<br />
for 3/32”, 1/8”, 5/32” and 3/16” universal head and<br />
flush rivets.<br />
No. SKT17 .................................................. $119.95
PNEUMATIC RIVETER WITH 3” YOKE<br />
$ 399 95<br />
Save<br />
$100.00<br />
The “C” squeezer is by far the most popular pneumatic<br />
type riveter. They are also the most versitile.<br />
With a wide array of yokes to choose from, there is<br />
practically no riveting job they cannot take on. That’s<br />
why we decided to create our own version of this<br />
popular squeezer. Our new ATS “C” Squeezer is lightweight<br />
and has the same power as the Chicago<br />
Pneumatic 214C squeezer on which it is based. It<br />
accepts the same yokes and attachments as the<br />
214C squeezer, and is powerful enough to squeeze<br />
up to 1/8” solid aluminum, or 3/32” solid steel rivets.<br />
ATS-114C ................................................... $499.95<br />
15 PIECE HI-LOK INSTALLATION KIT<br />
This remarkably versatile 15 piece<br />
Hi-Lok® tool kit combines in over<br />
256 ways to give you access to<br />
just about any confined space. It’s<br />
manufactured from 4130 steel and<br />
hardened to resist bending and<br />
$ 69 95<br />
$ 17 95<br />
Save<br />
$30.00<br />
twisting even when extended to its longest reach,<br />
and can deliver up to 40 inch pounds of torque. The<br />
complete kits consists of 2 - 1/4” drive clutch heads<br />
(clockwise and counterclockwise); 2 - straight arms in<br />
lengths 2” and 2.5”; 3 - bent arms in 20, 45, and 90<br />
degrees; 1 - female to female coupler; 2 - mating<br />
studs; 2 - endcaps; and 2 - locknuts. The entire kit<br />
comes in a compact (8”L x 4.25”W x 1.25”H) foamlined<br />
plastic case with cutouts for each piece. Get<br />
this kit and you’ll have over 200 hi-lok wrenches at<br />
your fingertips.<br />
HILOK-15...................................................... $99.95<br />
DIMPLE & DIE SETS<br />
Save $5.00<br />
CNC machined from high speed steel and hardened<br />
for durability. The faces are highly polished to<br />
pervent marring to the skin. 1/4” body length by 1/2”<br />
diameter. 3/16” (.187”) shank.<br />
4263DP-2 ......................(3/32”) ................... $22.95<br />
4264DP-2 .......................(1/8”) .................... $22.95<br />
4265DP-2 ......................(5/32”) ................... $22.95<br />
4266DP-2 ......................(3/16”) ................... $22.95<br />
DELUXE HAND/BENCH RIVET SQUEEZER KIT<br />
Hand riveters are good for their portability, but the biggest complaint is that they are exhausting<br />
when you have serious riveting to do. The answer to this was a bench squeezer, but at hundreds of<br />
dollars, they are beyond most of our budgets -- until now! The new ATS Hand/Bench Rivet Squeezer<br />
gives you the best of both worlds at a price you can afford. It’s a hand squeezer that converts to a<br />
free-standing bench squeezer in under 10 seconds! Just pin it into its cradle and you have a solid<br />
bench riveter; and when you need to use it as a hand riveter, simply unpin it. It uses all of the same<br />
yokes and accessories as the 5022, and will squeeze up to 3/16” aluminum, or 5/32” steel rivets.<br />
No.5022-DX .............................................(Complete Kit) ................................................$349.95<br />
No.5022-3A ......................................... (3” Squeezer Only) .............................................$129.95<br />
No.5022-3B ................................. (3” Squeezer & Bench Mount) .....................................$159.95<br />
$ 149 95<br />
Save $30.00<br />
$ 299 95<br />
Save $50.00<br />
RIVET SQUEEZER KIT<br />
Our newest Rivet Squeezer Kit contains everything you’ll ever need to tackle any riveting job. You get<br />
our popular ATSRS Rivet Squeezer, plus three yokes in sizes 1”, 2” and 3”. We’ve also thrown in our 6<br />
Piece Squeezer Set, and a set of Rivet Gauges to help you get the job done right. Our new ATS Rivet<br />
Squeezer will easily squeeze rivets up to 5/32” dia. The yokes are made of tool steel and hardened<br />
to resist flex. Adjustable ram eliminates the need for shims.<br />
No. ATSRS-KIT .......................................... (Complete Kit) ................................................. $179.95<br />
No. ATSRS-3 .........................................(3” Squeezer Only) ................................................ $59.95<br />
13<br />
www.aircraft-tool.com
14<br />
1-800-248-0638<br />
ATS REVERSIBLE SAFETY WIRE TWISTER<br />
$ 59 95<br />
Your Choice<br />
Reversible Safety Wire Pliers switches from right-handed<br />
(clockwise) to left-handed (counterclockwise)<br />
twisting at the flick of a switch. Excellent for series wiring<br />
where you must switch directions with each bolt.<br />
Features a smooth spring-loaded automatic return<br />
with a rugged reversing mechanism that resists dirt<br />
and contaminants, with a positive locking collar that<br />
will not pop back during use. It also has a tapered<br />
nose, and built in wire cutters. These are the twisters I<br />
want in my tool box!<br />
No. 6WR ....................... (6 inch) .................. $69.95<br />
No. 9WR ....................... (9 inch) .................. $69.95<br />
19<br />
$ 95<br />
SAFETY WIRE TWISTERS<br />
Tapered nose w/ Automatic spring return<br />
No. 6WA .......................... (6”) ..................... $25.95<br />
No. 1WA .......................... (9”) ..................... $25.95<br />
MILBAR SAFETY WIRE TWISTERS<br />
89<br />
$ 95<br />
Milbar’s safety wire pliers can twist<br />
safety wire in either direction with a<br />
simple turn of a sleeve. The new jaw design holds<br />
the wire firmly without nicks or scrapes. Spring-loaded<br />
return for easy opperation.<br />
No. 26W .......................... (9”) ..................... $95.95<br />
No. 25W .......................... (6”) ..................... $95.95<br />
No. 11WS .............(6” right hand twist) ......... $75.95<br />
SAFETY WIRE DRILL GUIDES<br />
6061A MT001 MT002<br />
6061A .................... (Bolts and nuts) ............ $49.95<br />
MT001 ........................(Bolts only) ................ $23.95<br />
MT002 ........................(Nuts only) ................ $25.95<br />
$ 50<br />
AIRCRAFT<br />
SAFETY WIRE 11<br />
each<br />
Lifetime Warranty<br />
Annealed stainless steel. 1lb container.<br />
No. 302-21 ....................(.021”) ................... $11.95<br />
No. 302-25 ....................(.025”) ................... $11.95<br />
No. 302-32 ....................(.032”) ................... $11.95<br />
No. 302-41 ....................(.041”) ................... $11.95<br />
FORM A FUNNEL<br />
Shape, drain, pour,<br />
store. Its that easy with<br />
the new Form-A-Funnel<br />
Flexible Draining <strong>Tool</strong>.<br />
It guides oil around<br />
skid plates and cross<br />
members right into<br />
your oil drain for easy,<br />
no-mess oil changes!<br />
This tool quickly bends,<br />
molds and holds any<br />
shape, so you can<br />
customize the perfect<br />
channel to drain liquids without making a mess.<br />
No. 18509 .....................(Rotax) ..................... $8.95<br />
No. 18609 ................ (Automotive) .............. $16.95<br />
No. 18611 ...................(Aviation) ................. $29.95<br />
TOM’S OIL FILTER CUTTER<br />
New! $ 49 95<br />
Tom’ s Oil Filter Cutter offers a new approach to the<br />
essential task of opening your oil filter for inspection.<br />
Most filter cutters work like a pipe or tubing cutter in<br />
that you have to go around and around the filter,<br />
adjusting cutter depth with each pass. Although you<br />
could do that with this tool, the real beauty of this<br />
new product is that the cut can be easily made in<br />
one pass. May also be used on smaller filters such as<br />
found on Rotax or automotive engines.<br />
No. 154701 ................................................. $55.95<br />
OIL NUT WRENCH<br />
The Oil Nut Wrench<br />
allows you to reach<br />
the adapter nut,<br />
which must be<br />
torqued to a value<br />
of 50 to 60 foot<br />
$ 95<br />
pounds in accor-<br />
49 dance with the<br />
CESSNA AD. Its use is<br />
required every time the oil filter is removed to prevent<br />
the possible loss of engine oil caused by loose<br />
or separated adapters. This tool is absolutely essential<br />
for anyone working on Cessna, Beech, Piper, and<br />
any other airplanes affected by the AD.<br />
No. TG961222 ............................................. $65.95<br />
INSTRUMENT HOLE PUNCH<br />
$ 95 109<br />
Save $26.00<br />
Reversible cutter for<br />
both 2-1/4” and 3-1/8”<br />
instrument panel<br />
holes.<br />
No. 123C .................. (Hole Punch) ............ $135.95<br />
No. T123C .............. (Drill Template) ............ $14.95<br />
NEBO REDLINE<br />
$ 24 95<br />
220 Lumens!<br />
The brightest flashlight<br />
under 5” long.<br />
The REDLINE® delivers an amazing 220 lumens of<br />
pure white light in a flashlight that measures just a<br />
little under 5”. 4X adjustable beam goes from a tight<br />
spotlight that can illuminate tail numbers from 150<br />
yards away, all the way to a wide floodlight that will<br />
light up your entire airplane at 15 yards. Also features<br />
S.O.S. mode, and emergency strobe mode. The<br />
power of this flashlight has to be seen to be believed!<br />
No. NB5599 .................... Silver .................... $29.95<br />
No. NB5610 ....................Black .................... $29.95<br />
NEBO CSI QUATRO<br />
$ 24 95<br />
• Only 5” long!<br />
• 75 lumen flashlight<br />
• Green night-vision light<br />
• UV mode for use with<br />
fluorescent dyes<br />
• Laser Pointer with 450<br />
yard range<br />
The CSI QUATRO packs a ton of versatility into a<br />
palm-sized flashlight. It’s a powerful 75 lumen LED<br />
flashlight, plus a green night-vision light. It also has<br />
a UV lighting mode (410-415nm) for use with fluorescent<br />
dyes. It even has a LASER POINTER.<br />
No. NB5520 ................................................. $29.95<br />
BATTERYLESS KINETIC FLASHLIGHT<br />
$ 24 95<br />
I’m sure you’re familar with those handy shake-it-andgo<br />
flashlights being sold everywhere. Well, this is another<br />
one of them -- but it’s the brightest we’ve ever<br />
seen. It uses 3 LEDs and and optical lens system to<br />
produce a truly brilliant light that lasts over 15 minutes<br />
for each 30 second shake. We also like the fact<br />
that it’s made from anodized aluminum instead of<br />
plastic. It’s water and shock resistant, and carries a<br />
lifetime warranty. Overall size is 8-1/2” long x 1-1/2”<br />
dia (about the same as a 2-cell Maglite).<br />
No. RC6000 ................................................. $34.95
AIR HYDRAULIC RIVETER KIT<br />
$ 95 99<br />
Our newest riveting kit features our ATS8805 riveter<br />
plus an assortment of tools to keep it in peak operating<br />
condition, all in a molded high impact case.<br />
• Pulls 3/32”, 1/8”, 5/32”, and 3/16” rivets<br />
• Includes Stem Catcher<br />
• 2300 lbs pulling force<br />
• 63” Stroke length<br />
Accessory Kit Contains: An assortment of 40 pop rivets in sizes<br />
3/32”,1/8”, 5/32”, and 3/16”; 1 set replacement o-rings and seals<br />
(1 set); Oil Bottle; replacement spring set (3); replacement valve<br />
pusher; replacement jaws and jaw case; wrench set; high impact<br />
molded case.<br />
No. ATS8805K .................. (Kit) ................... $105.95<br />
No. ATS8806 ..... (Heavy Duty Gun Only) ...... $89.95<br />
HEAVY-DUTY RIVENUT INSTALLER KIT<br />
$ 95 84<br />
Industrial strength rivenut tool is made from forged<br />
steel to withstand hard use. Unique design allows<br />
mandrels to be replaced quickly and easily. Kit includes<br />
mandrels and an assortment of rivenuts for<br />
the following sizes: 6-32, 8-32, 10-32, 10-24, 1/4-20,<br />
5/16-18 and 3/8-16.<br />
No. 39213 ................................................... $94.95<br />
24<br />
$ 95<br />
SWIVEL BLIND RIVETER<br />
You Save<br />
$10.00<br />
Swivels 360 degrees for versatility. Pulls up to 3/16”<br />
Cherrymax rivets and 1/4” pop rivets. Doubles as a<br />
90° offset riveter, or a straight puller just by rotating<br />
the head.<br />
No. 36021 ................................................... $29.95<br />
HUCK AIR POWERED RIVETER<br />
$ 34995<br />
You Save<br />
$20.00<br />
Huck Hydraulic Riveters feature a unique patented<br />
jaw that allow them to travel a full 5/8” on one cycle.<br />
It will pull 1/8”, 5/32” and 3/16” Cherrymax rivets<br />
without any additonal attachments. they will also pull<br />
many other types of blind rivets ranging from simple<br />
Pop rivets to sophisticated Monobolts in sizes ranging<br />
up to 3/6” steel rivets and 1/4” monobolts. Powerful<br />
hydraulic action exerts 3500 lbs. of pull. Approved for<br />
use on U.S. Government applications. Made in USA.<br />
No. AK175A ..............(Air Powered) ............ $369.95<br />
No. HK150A ........... (Hand Powered) ......... $239.95<br />
41¢ a<br />
Piece!<br />
$ 49 95<br />
CLECO SPECIAL!<br />
10<br />
Zephyr brand KWIK-LOK clecos are the best.<br />
Spring loaded type with a grip range of 0-1/4”,<br />
and 70 lbs pull force. 25 pieces.<br />
25CL-3/32 .................. 3/32” ..................... $11.95<br />
25CL-1/8 ..................... 1/8” ...................... $11.95<br />
25CL-5/32 .................. 5/32” ..................... $11.95<br />
25CL-3/16 .................. 3/16” ..................... $11.95<br />
25 $<br />
25 pcs<br />
“K” Series<br />
Rivenut Installer Kit<br />
Complete kit includes tool and mandrels in sizes<br />
6-32, 8-32, 10-32 and 1/4-20 plus an assortment of<br />
rive-nuts and case.<br />
No. 20RNK ................................................... $59.95<br />
MICROSTOP COUNTERSINK KIT<br />
$ 95 52<br />
Complete kit includes our 133 Microstop Countersink<br />
and 4 pilot cutters in sizes #40, #30, #21, and #12.<br />
No. 133KIT ................................................... $55.95<br />
CLECO KIT<br />
An assortment of K-series clecos (0 to .25” grip range)<br />
plus a pair of cushioned cleco pliers packaged in a<br />
convenient storage case. The 50 piece kit contains<br />
13 ea. of the 3/32” (silver), & K-1/8 (copper) clecos;<br />
plus 12 ea of the 5/32” (black), & 3/16” (gold) clecos.<br />
The 100 piece kit contains 25 each of the 3/32”, 1/8”,<br />
5/32”, and 3/16” clecos.<br />
No. CL50K ................(50 piece kit) .............. $24.95<br />
No. CL100K .............(100 piece kit) ............. $48.95<br />
26EL<br />
CLECO CAPS<br />
Vinyl cleco cap slips over the end of standard<br />
spring-loaded (K, KHD, or KK series) clecos and prevents<br />
damage to the skin. Can be reused many<br />
times over and cleans off easily with soap and water.<br />
Note: does not include clecos.<br />
SZE COLOR<br />
3/32”<br />
1/8”<br />
5/32”<br />
3/16”<br />
Gray<br />
Orange<br />
Black<br />
Blue<br />
10-Packs<br />
PART# PRICE<br />
10KSCAP-3/32 $2.75<br />
10KSCAP-1/8 $2.75<br />
10KSCAP-5/32 $2.75<br />
10KSCAP-3/16 $2.75<br />
SPRING CLAMPS<br />
24EL<br />
542<br />
Great for holding sheet metal in place while marking,<br />
fitting, or final riveting. Requires the use of Cleco<br />
Pliers (p/n 131).<br />
No. 24EL .........................(1/2”) ........... $2.25 $1.85<br />
No. 26EL .......................... (1”) ............ $2.25 $1.85<br />
No. 542 ........................... (2”) ............ $5.95 $5.50<br />
15<br />
www.aircraft-tool.com
16<br />
1-800-248-0638<br />
ATS PRO TUBE BEADING KIT<br />
The FinesT Beading <strong>Tool</strong> Money Can Buy. We guaranTee iT!<br />
Our AP145 Beading <strong>Tool</strong> is a perfect recreation of the venerable<br />
Parker Beading <strong>Tool</strong> in every detail. Nothing was overlooked:<br />
from the smooth contours that makes it feel so comfortable<br />
in your hand to the classic phenolic knobs that gave the Parker<br />
its distinctive look. We also added a few improvements of our own. Such<br />
as ground, hardened, and polished surfaces and high-polymer gripping jaws<br />
for mar-free beads in aluminum, copper, brass, and mild steel tubes ranging from<br />
1/4” to 1” diameter. We know we’ve got it right, and that’s why our ATS Pro Beading<br />
<strong>Tool</strong> Kit carries the ATS Pro Lifetime Warranty.<br />
No. AP145 ................................ ..............................................................$419.95<br />
Lifetime Warranty<br />
Meets MILSPEC<br />
MS33660D and SAE<br />
AS5131 standards.<br />
$ 379 95<br />
Save<br />
$ 40 00
IMPERIAL® HEAVY DUTY ROTO-LOK<br />
180° TUBE BENDER<br />
Save 30%<br />
Imperial has redesigned their best heavy<br />
duty tube bender to include their Roto-<br />
Lok quick-action indexing lever which<br />
allows you to make up to 180° bends in<br />
any type of metal (including stainless<br />
steel) accurately and with minimal effort.<br />
No. 464FH-04....(1/4 Dia) .... $41.95<br />
No 464FH-06 ...(3/8 DIa) ..... $48.95<br />
IMPERIAL 37° TUBE FLARING TOOL<br />
$ 95 85<br />
The industry standard Rol-Air® is the choice<br />
of professionals. Flares soft copper, aluminum<br />
and brass tubing. The faceted, hard chrome<br />
coated cone rolls out perfect 37° flares above<br />
the die block, and then automatically burnishes<br />
the flare face while maintaining the original wall<br />
thickness at the base of flare. New slip-on yoke<br />
permits use in tight quarters. Satin chrome and<br />
black finish. Flares tube sizes:3/16”, 1/4”, 5/16”,<br />
3/8”, 1/2”, & 5/8” O.D. tubing.<br />
No. 507FB .................................................... $89.95<br />
PARKER 37°<br />
FLARING TOOL<br />
$ 95 79<br />
Flares 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8”<br />
and 3/4” tubing. The heavy duty Parker Hannifin flaring<br />
tool is designed to make perfect 37° aviation<br />
flares in aluminum, brass and mild steel tubing.<br />
No. 212FB .................................................... $85.95<br />
LEXEIT SEALANT SCRAPER KIT<br />
Introductory Price<br />
This innovative new kit is the brainchild of an aircraft<br />
mechanic who needed a way to effectively remove<br />
sealants and residue from fuel tanks and other areas<br />
without doing damage to expensive airplane finishes.<br />
The kit consists of a handle and 7 interchangeable<br />
Lexan tips. The scraping tips will not scratch<br />
or mar painted and polished surfaces. This kit is a<br />
brilliant idea and is a must-have for any mechanic<br />
needing to clean away sealants and adhesives.<br />
No. LX001 ....................................... $49.95 $45.95<br />
VALVE SPRING COMPRESSOR<br />
$ 174 95<br />
For all Continental and Lycoming engines. Adjustable<br />
type to work on all series engines. Ring installs<br />
on rockers and ”C” collar compressor spring to allow<br />
keeper removal.<br />
No. 3602 ................................................... $179.95<br />
CAULKMASTER AERO SEALANT GUN<br />
$ 119 95<br />
A patented trigger mechanism gives you the exact<br />
amount of sealant you nead, so you can dispense<br />
material at a smooth steady pace. Even “weep” at<br />
the end of a run is a thing of the past... when you stop<br />
squeezing the trigger, the flow stops immediately.<br />
No. PG10260 ............................................. $129.95<br />
SEMCO AIR SEALANT GUN (6z)<br />
$ 319 95<br />
Semco sealant guns applies sealants and adhesives<br />
packaged in Semco cartridges. The nickel plated retainer<br />
features a bayonet lock that permits easy replacement<br />
of cartridges. The handle is removeable<br />
to allow more clearance and better manipulation in<br />
confined areas.<br />
No. 250A-6 ............(with 6” Retainer) ......... $339.95<br />
No. 250A-2 ............(with 2” Retainer) ......... $299.95<br />
For all flange shafts per Continental Bulletin M-70-2.<br />
For installing one piece stretch seals easily and efficiently<br />
without damaging the seal.<br />
No. 5209 ..................................................... $89.95<br />
PUSH ROD SPRING<br />
COMPRESSOR<br />
$ 184 95<br />
Compresses<br />
the push rod<br />
spring, which<br />
can then be<br />
removed with<br />
the clips furnished.<br />
Full set of Instructrions included.<br />
No. 68-3 .................................................... $192.95<br />
PISTON RING COMPRESSOR SET<br />
$ 129 95<br />
LYCOMING CYLINDER BASE<br />
WRENCHES<br />
$96 95<br />
Save<br />
$20.00<br />
$ 95 34 ea.<br />
PROPELLER SHAFT OIL<br />
SEAL INSTALLER<br />
$ 95 83<br />
Fits all older model<br />
Lycoming engines.<br />
Superior quality wrench is specifically used with internal<br />
hex nuts on Lycoming engines. Drive end is 1/2”.<br />
No. 6494-2 ......................1/2” ..................... $39.95<br />
No. 6494-3 ......................3/8” ..................... $39.95<br />
Save<br />
$6.00<br />
PUSH ROD FLARING TOOL<br />
Expanding ball type tool produces a flare every time.<br />
Balls rotate inside housing, expanding it into aluminum<br />
boss.<br />
No. 4915A ................................................... $99.95<br />
Our aviation piston ring compressor<br />
kit includes a quickchange<br />
Ring-O-matic pliers<br />
and bands for the following size<br />
pistons: 3-7/8” to 4-1/8”, 4-1/8”<br />
to 4-1/2”, 4-1/2” to 4-3/4”,<br />
4-3/4” to 5”, 5” to 5-1/4” and 5-1/4” to 5-3/4”.<br />
No. 7500 ................................................... $149.95<br />
17<br />
www.aircraft-tool.com
18<br />
1-800-248-0638<br />
15 TOOLS UNDER $15<br />
CYLINDER BASE WRENCH SET<br />
14<br />
$ 95<br />
Ea.<br />
Fits all Continental<br />
and older model<br />
Lycoming engines.<br />
A set of all 4 twelve-point cylinder base wrenches<br />
(sizes: 1/2”, 9/16”, 5/8”, and 3/4”) in 1/2” drive. Overall<br />
length 13-1/2”.<br />
No. 2882-1/2 ............................................... $19.95<br />
No. 2882-9/16 ............................................. $19.95<br />
No. 2882-5/8 ............................................... $19.95<br />
No. 2882-3/4 ............................................... $19.95<br />
No. 2882-5 ................(set of all 4) ............... $55.95<br />
AIR REGULATOR<br />
$11 95<br />
Precision, quality built regulators. Accurately<br />
control airflow at up to 150 psi.<br />
1/4” NPT thread size. Positive lock.<br />
No. 1824 ..................................................... $14.95<br />
CHERRYMAX GRIP GAUGE<br />
$ 95 10<br />
Used to determine the proper grip length of Cherrymax<br />
rivets. Easy to use: just insert the gauge into<br />
the prepared hole, draw the gauge back until the<br />
hook contacts the backside of the structure, then<br />
take your reading directly from the gauge.<br />
No. 269C3 ................................................... $12.95<br />
RIVET CUTTER<br />
ATS PRO MINI VACUUM<br />
$ 95 14<br />
Cuts from 3/32 to 1/4 diameter rivets. Cuts same<br />
length every time with use of leaf spacers.<br />
No. 130 ....................................................... $18.95<br />
$ 95 14<br />
You Save<br />
$9.00<br />
Cast aluminum housing. Venturi type cleaner, picks<br />
up ferrous and non-ferrous metal chips. Equipped<br />
with a flexible 12” nozzle.<br />
No. ATSMV01 ............................................... $25.95<br />
DIGITAL FISH SCALE<br />
A fish scale is used to measure aircraft weights and<br />
forces such as control stick force, landing gear forces,<br />
and tail weight. This portable scale not only precisely<br />
measures weghts to within .5 lbs (8 oz), but it<br />
also includes a 3 ft. tape measure and a flashlight.<br />
The scale has a backlit digital readout that measures<br />
in pounds, kilograms and ounces. Also measures<br />
temperature in both Fahrenheit and Celsius. Uses two<br />
AAA batteries (included)<br />
No. NB5470 .................................... $19.95 $14.95<br />
SKIN WEDGE<br />
A skin wedge is the tool to use (instead of a screwdriver!)<br />
when you need to pry and jog sheet metal<br />
skins. Just slip the thin curved blade into the gap and<br />
slide it along the edge to gently separate the edges<br />
without gouging the skin. Can also be used as a jogging<br />
tool to align new skin. 7” long by 1” wide.<br />
No. SWG7 ........................................... $9.95 $8.95<br />
SWIVEL FLUSH RIVET SET<br />
$14 95<br />
The swiveling face will stay flush against the head of<br />
the rivet even if you are a little off angle. The 1 1/4”<br />
face is highly polished and is mushroomed to eliminate<br />
“smilie” dents from the edges.<br />
No. 181 ....................................................... $21.95<br />
TITAN SMART TORCH<br />
The Smart Torch Titan, with its fully adjustable 2400°F<br />
precision flame, will wow even the most discerning<br />
gadget enthusiast. Its ignition system is both wind-resistant<br />
and water-proof. And just for fun, it’s transparent<br />
fuel tank glows neon blue when in use – which<br />
is truly even more entertaining than it sounds. So go<br />
on! Burn things. Torch stuff. Make your friends jealous!<br />
Ships without butane.<br />
No. 9004-NB ....................................... $9.95 $8.95<br />
SPEED DEBURRING TOOL<br />
$ 95 13<br />
Deburrs holes easily with speed handle.<br />
No. SP275A ................... 6” long .................. $17.95<br />
No. SP375A .................. 10” long ................. $17.95<br />
7<br />
$ 95<br />
AUTOMATIC CENTER PUNCH<br />
Spring loaded. Alloy hardened steel tip.<br />
No. 001A ....................................................... $8.95<br />
ATS DZUS DRIVER<br />
12<br />
$ 95<br />
The wide blade and radiused tip makes our Dzus<br />
Driver the ideal tool for locking and unlocking Dzus®<br />
(Z-Lock) type fasteners. The large contoured handle<br />
provides maximum grip without slipping. Fits #5, #6<br />
and #6.5 series studs.<br />
No. DZS1...................................................... $14.95<br />
BRASS COMPASS SCREWDRIVER<br />
$8 95<br />
Solid brass screwdriver with a small flat blade that is<br />
designed for the adjustment of magnetic compasses.<br />
No. 906 ......................................................... $9.95<br />
CONTOUR GAGES<br />
Contour gauges are designed for precise surface<br />
duplication in sheet metal work. The 35 ultra-thin pins<br />
per inch assure that you are getting an exact replication<br />
of your copied shape. Capable of duplicating<br />
surfaces up to 3-1/2” deep.<br />
No. GT837 ....................... (6”) .......... $10.95 $9.95<br />
ATS CAMLOC PLIERS<br />
$ 95<br />
13<br />
Used to depress 2600, 2700 and 4000 series Camloc®<br />
studs prior to installation. Manufactured from<br />
drop forged steel and have polished surfaces to<br />
avoid scratching the stud as it’s installed.<br />
No. CLP1 ..................................................... $16.95
PAINT CUTTERS<br />
& ARBOR<br />
$ 119 95<br />
PA36-5XX<br />
PA36-666<br />
89<br />
$ 95<br />
$ 95 45<br />
ATS MINI DIE GRINDER 90°<br />
Save 30%<br />
With Paint Cutter<br />
They work by slicing through<br />
the paint around the head<br />
of the screw. 1/4x28 thread<br />
to fit into any angle drill, or<br />
get the optional arbor for<br />
use in a drill chuck.<br />
No. PA36-SET.............................................. $125.95<br />
ATS RECIPROCATING SAW KIT<br />
Heavy duty saw features<br />
safety guards<br />
and a locking throttle<br />
to prevent accidental<br />
starts. At<br />
10,000 strokes per<br />
minute, this saw will<br />
cut through steel or<br />
aluminum just as fast and easily as cutting through<br />
wood. Complete kit includes the high speed saw,<br />
two sets of blades, mini oiler, a swivel connector, accessory<br />
tooling, and a blow molded case.<br />
No. ATS8202K .............................................. $99.95<br />
A 90 degree die grinder that’s a sheer joy to use. It’s<br />
less than 6” long and fits comfortably in the hand for<br />
extended use without discomfort. Use it with rotary<br />
files, or Scotch-Brite Roloc discs to shape and polish<br />
your work. 20,000 RPM & 1/4” collet size.<br />
No. ATS5105 .....................90° ..................... $65.95<br />
No. ATS5107 .....................45° ..................... $45.95<br />
No. ATS5101 ................. Straight .................. $45.95<br />
WEAR GAUGES<br />
Airworthiness Directive AD2011-10-09 requires the<br />
inspection of the rollers, roller housings, seat rails, engagement<br />
pin and attaching hardware. In all, there<br />
are five (5) measurements that are required for the<br />
pilot and co-pilot seat assemblies. These two tools<br />
will shorten the time to make these five compliance<br />
measurements to only two minutes! TOOL-A measures<br />
the pin engagement, roller tang width, and<br />
roller tang thickness, and TOOL-B measures the seat<br />
rail hole wear, and the opening of the roller housing<br />
tangs.<br />
No. AD2011-10-09 ......................... $39.95 $35.95<br />
EXHAUST STUD REPLACER KIT<br />
DRILL GUIDE & BUSHING KIT<br />
Save money with our combo drill bushing kit. Contains:<br />
DH01 Drill Housing, DB-40 Drill Bushing (#40),<br />
DB-30 Drill Bushing (#30), DB-21 Drill Bushing (#21),<br />
and DB-10 Drill Bushing (#12).<br />
No. DH01-KIT ............................................... $39.95<br />
$ 95 69<br />
$ 209 95<br />
You Save $10.00<br />
A precision tool that allows you to remove broken<br />
studs, retap, and replace them accurately to the<br />
original dimensions. This can be accomplished in<br />
most cases without removing the cylinder; even<br />
Number One in a Bonanza, Works on all Continental<br />
470, 540, 550, and 520 series engines. The kit<br />
includes: One steel, jig bored, locating plate; Three<br />
knurled retaining nuts to secure the locating plate;<br />
Four hardened and ground drill bushings; Three drill<br />
extensions - 6”, 9”, and 12”; One 3/8” drill chuck.<br />
No. HE01 ................................................... $219.95<br />
ATS AIR NIBBLER<br />
Save 30%<br />
$ 95 34<br />
Cuts beautiful, burr-free edges in aluminum and<br />
steel sheets up to 16 ga. thick. Features push type<br />
action to give you a better view of your cutting path.<br />
No. ATS8300 ................................................ $99.95<br />
No. ATS8300-RP .. replacement punch .......... $9.95<br />
RIVET SPOT<br />
SANDBLASTER<br />
$2795 You Save<br />
30%<br />
Self-contained sand blaster gets down to the bare<br />
metal. Ideal for removing paint, corrosion, oxidation<br />
or other spotted areas. The abrasive is re-circulated,<br />
no mess to clean up. Contains 4 rubber nozzles for<br />
flat surfaces, panel edges, and inside and outside<br />
corners.<br />
No. ATS201 .................................................. $39.95<br />
You Save $10.00<br />
2” AIR PANEL SAW<br />
$ 135 95<br />
Designed to make precise, controlled cuts in aluminum<br />
panels up to 1/4” thick. Leaves a high-luster,<br />
burr-free edge that does not require any additional<br />
filing or cleanup. Great for cutting out access panels.<br />
Excellent balance and smooth operation.<br />
• Uses 2” (51 mm) diameter saw blades<br />
• 620 RPM Free Running<br />
• 080” (2 mm) steel capacity<br />
• 290” (7.5 mm) aluminum capacity<br />
• Length 6-7/8” (175 mm)<br />
No. ATS8510 .............................................. $155.95<br />
No. ATS8510-RB ............ (blade) .................. $21.95<br />
ATS 17PC MICRO DIE GRINDER KIT<br />
$ 95 89<br />
A complete rear exhaust micro die grinder kit featuring<br />
a powerful die grinder and a collection of stones<br />
in various shapes and sizes. Micro Die Grinder Specifications:<br />
54,000 RPM Free Speed, 1/8” (3mm) Collet<br />
Size, 5-3/8” (137mm) overall length, .44 lbs (.2 kg)<br />
weight, rear exhaust<br />
No. ATS5001K .............................................. $95.95<br />
COMPRESSION TESTER<br />
EXTENSION<br />
$25 95<br />
You Save<br />
Over 15%<br />
This 8-1/2” extension lets you get<br />
to remote plugs for compression<br />
testing. T-handle lets you screw<br />
and unscrew the extender into<br />
the spark plug port without a<br />
wrench. The quick connect coupler<br />
makes it as snap to hookup<br />
and disconnect your tester.<br />
18MM-XT .................. (ATS 2E/2EM) ............ ..$29.95<br />
E18MM-XT............. (Eastern E2A/E2M) .......... $29.95<br />
19<br />
www.aircraft-tool.com
20<br />
1-800-248-0638<br />
NEW ATS PRO REDBOX RIVETING KITS<br />
Our Redbox Riveting Kit has all the tools you need to<br />
drive rivets like a pro.<br />
Lifetime Warranty<br />
199 95<br />
$<br />
Any Kit...your ChoiCe<br />
The latest addition to our line of Professional Riveting Kits is modeled after the popular “redbox” kit that was<br />
used extensively by fabricators and mechanics in the production of the Boeing 737. The redbox kit is compact<br />
enough to fit in a toolchest, but still has all of the essentials for standard riveting. It contains our new ATS Pro E-<br />
Series Rivet Gun, two of the most commonly used Bucking Bars (142 and 148), and an assortment of rivet sets<br />
for Universal Head (AN470) and Flush (AN426) rivets in sizes 3/32” to 3/16”. There is also an Air Regulator, a set of<br />
Mechaid and Beehive springs, and a bottle of Marvel Mystery Air <strong>Tool</strong> Oil. Everything comes neatly packed in<br />
the included molded case featuring the redbox logo. The ATS Pro RedBox Riveting Kit is a part of our ATS-PRO<br />
Series, so you can rest assured that your tool investment will be well protected by our Unconditional 30 Day<br />
Money Back Guarantee, and industry-leading ATS Pro Lifetime Warranty.<br />
No. ATS-E2XRK ...............................(E2X Gun) ......................................... $219.95<br />
No. ATS-E3XRK ...............................(E3X Gun) ......................................... $225.95<br />
No. ATS-E4XRK .............................. (E4X Gun ) ........................................ $229.95<br />
No. ATS-RKU .......................(Upgrade kit without gun) .............................. $59.95<br />
ATS E-SERIES PRO RIVET GUNS<br />
149 95<br />
$<br />
Any Size...your ChoiCe<br />
Lifetime Warranty<br />
Our new E-Series rivet guns feature the same quality<br />
and power as our Pro-X series with an even more delicate<br />
feathering trigger to control the rivet setting process.<br />
A new muffler system also makes them noticeably<br />
quieter than the Pro-X series. With their new valve<br />
and shuttle mechanism, they are more reliable, and<br />
less likely to sputter, choke, or jam up. This new style is<br />
based on the latest Chicago Pneumatic design and<br />
carries the ATS Pro Lifetime Warranty.<br />
No. ATS-E2X ................. (2X Gun) ............... $165.95<br />
No. ATS-E3X ................. (3X Gun) ............... $169.95<br />
No. ATS-E4X .................(4X Gun ) ............... $175.95<br />
161<br />
FLUSH SET, RUBBERGUARD<br />
BUCKING BARS<br />
140 141 142<br />
147 148 149<br />
150<br />
120<br />
RIVET SET MIX<br />
A mixture of the most common rivet sizes. Each rivet<br />
set is 3-1/2” long. Fits universal and flush style rivets.<br />
No. 120 .................... (Straight Set) .............. $24.95<br />
No. 121 ......................(Offset Set) ............... $24.95<br />
153<br />
16 95 $<br />
$ 12 95<br />
Save $2.00<br />
1-1/4” diameter rubber guard rivet set. Rubber guard<br />
design for added protection. Flush rivet set with a<br />
rubber boot to prevent damage to metal surface<br />
while riveting. Fits any .401 rivet gun.<br />
No. 12A ..................... (1-1/4” dia) ............... $14.95<br />
No. 12C ..................... (1-1/2” dia) ............... $19.95<br />
DIMPLE & DIE<br />
BLOCK SET<br />
$ 16 95<br />
Save $2.00<br />
Accepts 426XDP series dimple dies. Can be used in<br />
a standard rivet gun or struck with a hammer.<br />
No. 4187 ..................................................... $18.95<br />
154<br />
ea<br />
121<br />
BUCKING BAR KITS<br />
The 10 piece package contains all of the bucking<br />
bars shown above.<br />
No.10PC.................................185.95 $159.95<br />
The 6 piece set includes the 140, 141, 142, 147,<br />
148 and 149 bucking bars.<br />
No. 6PC..................................$109.95 $98.95<br />
Our 4 piece set comes with the following sizes-142,<br />
147, 148 and 149.<br />
No. 4PC....................................$74.95 $66.95
Save Over<br />
$ 20 00<br />
ATS PRO RIVET GUNS<br />
139 95<br />
$<br />
The standard tool used in aircraft manufacturing<br />
plants such as Boeing and Locked-Martin has just<br />
gotten better! We’ve re-tooled our popular X-Guns to<br />
make them smoother and more powerful, while still<br />
keeping them completely interchangeable with Chicago<br />
Pneumatic guns. As an added bonus, we’ve<br />
included, a FREE set of Beehive & Mechaid Retainer<br />
Springs, plus a FREE 4oz bottle of ATS <strong>Tool</strong> Oil (a $22<br />
value). The Pro-Rivet Guns carry a Lifetime Warranty.<br />
No. ATS-3X ......(3X Gun - 3/16” capacity) .. $159.95<br />
219 95<br />
$<br />
ATS “JIFFY” RIVET GUN KIT<br />
The “Jiffy” Corner Rivet Gun is a favorite of the industry<br />
because it gets into tight places that are beyond<br />
the reach of a conventional X-Gun. They use special<br />
“stubby” rivet sets (p/n J510-SET) to deliver the same<br />
force as a 3X riveter in a gun that’s only 4” long. Teasing<br />
throttle for total riveting control. Includes Special<br />
Mechaid Spring, plus a FREE bottle of ATS Air <strong>Tool</strong> Oil,<br />
and a handy tool bag. Lifetime ATS-Pro Warranty.<br />
No. ATS-200BK2 ......................................... $239.95<br />
SCREW & BOLT<br />
REMOVER KIT 10”<br />
$26 95<br />
This tool is used to remove screws, bolts, and nuts that<br />
are corroded or cannot be loosened by conventional<br />
methods. Fits all rivet guns with a .401 shank. 3/8”<br />
drive. Includes a 1/4” adapter to retain bits.<br />
No. AT540A-KIT ............................................ $30.95<br />
ATS PRO DESIGNER RIVET GUNS<br />
Available Colors Description<br />
RED Sunset Red<br />
BLUE Caribbean Blue<br />
YELLOW Yellow<br />
GREY Hammertone Grey<br />
GREEN Lime Green<br />
BLACK Starlight Black<br />
INDIGO Midnight Indigo<br />
Ordering Instructions: When ordering, please<br />
specify the color desired. Example: to order a RED<br />
3X gun, use part number ATS-3X-RED.<br />
Our best-selling riveting kit Includs our ATS Pro Rivet<br />
Gun, a 4-piece set of Bucking Bars (141, 142, 148<br />
& 149), ATS Synthetic Air <strong>Tool</strong> Oil, 5-piece Standard<br />
Rivet Set, 4-piece Offset Rivet Set, a Rubber Guard<br />
Flush Rivet Set, and a Professional Air Regulator. It all<br />
comes to you in a stylish molded case to keep things<br />
neatly organized.<br />
This is the perfect “field” kit to take with you anywhere<br />
-- it has the riveting tools you need conveniently laid<br />
out in one handy ready-to-go package. The ATS Professional<br />
Riveting Kit is a part of our ATS-PRO Series,<br />
so your tool investment will be well protected by our<br />
Unconditional 30 Day Money Back Guarantee, and<br />
industry-leading ATS Pro Lifetime Warranty.<br />
No. ATS-3XPK ............... (3X Gun) ............... $279.95<br />
No. ATS-PKU ..............(Upgrade Kit) ............ $139.95<br />
ATS PRO RIVETING KITS<br />
249 95<br />
$<br />
Lifetime Warranty<br />
169 Any Color...your ChoiCe<br />
95<br />
$<br />
Express your individuality with our Designer Pro<br />
Rivet Gun. You get the same rugged durability,<br />
reliability, and power of our Pro Series Rivet gun<br />
in an array of brilliant new colors that will set you<br />
apart from the ordinary. Everything about this<br />
gun, from its rich vibrant color to the laser-etched<br />
ATS Pro logo on the side, reflects the outstanding<br />
quality you’ve come to expect from ATS. And, of<br />
course, it’s all backed by our industry leading unconditional<br />
ATS-Pro Lifetime Warranty.<br />
No. ATS-3X-COLOR .............. (3X Gun - 3/16” capacity) .......................... $185.95<br />
21<br />
www.aircraft-tool.com
22<br />
1-800-248-0638<br />
DELUXE BRAKE BLEEDER TANK<br />
Lifetime Warranty<br />
STRUT SERVICING EQUIPMENT<br />
$ 375 95<br />
Our kit contains<br />
all of the hardware<br />
you’ll need<br />
to deliver nitrogen<br />
to tires and<br />
struts from a<br />
nitrogen bottle.<br />
You Save $10.00 Includes a regulator,<br />
gauges, shut off valve, 12’ hose and a strut<br />
coupler. Does not include nitrogen bottle. 0-500 psi<br />
delivery pressure.<br />
No. 606 ..................................................... $385.95<br />
No. 607 ............(High press. 0-2500 psi) .... $659.95<br />
NUMBERED DRILL SET<br />
$ 95 79<br />
Our Deluxe Brake Bleeder Tank has been completely<br />
redesigned to resist the solvent effects of most types<br />
of aviation brake fluids. The high-impact plastic reservoir<br />
and specialized seals are compatible with<br />
5606 and Skydrol. The hand operated pressurizing<br />
pump has also been re-engineered to deliver more<br />
pressure with fewer strokes. You get everything needed<br />
including a Cleveland adapter and the universal<br />
adapter which will fit most brake receptacles.<br />
No. 225DX ................................................... $89.95<br />
$34 95<br />
A complete set of<br />
60 number (wire<br />
gauge) drill bits. in<br />
sizes 1-60. 135 degree<br />
split point, high<br />
speed steel.<br />
No. P60 ....................................................... $39.95<br />
$ 239 95<br />
AN HOSE ASSEMBLY MANDRELS<br />
$ 145 95<br />
Used to assemble AN & Stratoflex-300 series hydraulic<br />
hose fittings in sizes AN3, AN4, AN5, AN6, AN8, AN10,<br />
AN12<br />
2701-KIT .................................................$155.95<br />
AIRCRAFT STRUT PUMP<br />
Save $10.00<br />
Fully re-designed using aircraft grade 6061-T6 aluminum cylinder construction. Precision machined with new<br />
aircraft grade high pressure 3000psi seals. Develops up to 1,500 psi with 150psi (max) input. Safety one-shot<br />
valve “pump”action. New “Hammer-tone” powder coating.<br />
No. 675A .......................................................................................................................................... $249.95<br />
MEYER TIRE BEAD BREAKER<br />
Handles tires up to 14” wide<br />
and up to 10” from outside of<br />
the rim. For tube and tubeless<br />
tires. Easily adapts for a wide<br />
range of aircraft tires.<br />
$ 159 95<br />
No. AB-1 .................................................... $175.95<br />
HIGH PRESSURE STRUT COUPLER<br />
SK2043C 556<br />
The Schrader strut couplers attaches directly to the<br />
strut valve to inflate struts. The Tee Coupler has a builtin<br />
core depressor pin to allow you to deflate struts as<br />
well. Inflates most types of aircraft struts.<br />
No. SK2043C ............(Gooseneck) .............. $12.95<br />
No. 556 ................... (Tee-Coupler) ............. $35.95<br />
TIRE & WHEEL BALANCER<br />
$ 375 95<br />
The new Desser <strong>Aircraft</strong> Tire & Wheel Balancer is a<br />
significant improvement over the old and outdated<br />
Goodyear balancer. It will easily balance any type of<br />
aircraft wheels ranging from a 500-4 Ercoupe all the<br />
way up to a 35/11-18 Gulfstream main tire assembly.<br />
Made of high grade aluminum for maximum<br />
strength and durability. Features an alloy steel shaft<br />
and high tolerance bearings. Comes complete with<br />
instructions and starter weight kit. Made in USA.<br />
No. AS01 ................................................... $385.95<br />
No. AS01-5W ............... lead wts ................... $7.95<br />
BRAKE RELINING TOOLS<br />
$22 95<br />
Our W404 brake relining tool makes it virtually impossible<br />
to botch a brake relining job. The threaded<br />
screw action of the rivet insertion tool insures a perfect<br />
roll on brake rivets without damaging the liner.<br />
No. W404 .................. (Threaded) ............... $25.95<br />
No. W403 .................... (Impact) ................. $13.95<br />
No. 4-4 .................... (Reline Rivets) ............... $5.95
LADIES RAIN SHIRT<br />
These hand dyed shirts<br />
have a raindrop dyed<br />
pattern over the entire<br />
shirt. With an image of<br />
a biplane blended into<br />
the scroll work. 100%<br />
pre-shrunk cotton, ladies junior cut. Available in sizes:<br />
Small, Medium, Large, and X-Large. Available colors<br />
are: Purple and Teal. Please specify size and color<br />
when ordering.<br />
TSBL-XXX ............... (All sizes & colors) .......... $14.95<br />
AVIATION CHARM & NECKLACE<br />
$ 29 95<br />
You Save<br />
$16.00<br />
100% Sterling Silver<br />
A great gift idea for the pilot lady in your life. Sterling<br />
Silver charm measures 1” x 3/4”.<br />
AJ501LW-SN ...........(Low-Wing Heart) ........... $45.95<br />
AJ6000-SN ........... (Attitude Indicator) ......... $45.95<br />
AVIATION STUFFED FRIENDS<br />
SA-TIGER ......................................... $19.95..$14.95<br />
SA-PROP ......................................... $19.95..$14.95<br />
AIRPLANE WEATHERVANES<br />
EZV-HIWING<br />
45<br />
EZV-BIWING<br />
$ 95<br />
EZV-B17 EZV-HELI EZV-CESSNA<br />
These steel weathervanes would make a perfect<br />
gift for anyone who loves aviation! These will look<br />
perfect on top of your hangar or home. Includes<br />
12” deck mount, more options online at www.<br />
aircraft-tool.com<br />
COMBAT HELICOPTER SET<br />
Take your dogfighting skills to the next level with a set<br />
of combat helicopters. Literally shoot your opponent<br />
out of the sky by taking careful aim and pressing<br />
your remote’s fire button. Your helicopter will shoot a<br />
beam of light that will momentarily disable your opponent’s<br />
warbird if your aim is true. All in all pretty safe<br />
and harmless, but loads of fun. And just imagine the<br />
pleasure you’ll have delighting in your friends’ agony<br />
as you repeatedly vanquish them from the heavens<br />
(however, you may not have many friends left if you<br />
don’t let them win every once in a while). Complete<br />
kit consists of two (2) combat helicopters and remote<br />
controls.<br />
38H-353 .............(Set of 2 Helicopters) ........ $35.95<br />
SYMA APACHE HELICOPTERS<br />
These are the SYMA versions of the awesome Hughes<br />
AH-64 Apache. It’s the Army’s latest attack helicopter,<br />
and it’s a natural born killer. These 8” model does justice<br />
to the real thing not only in looks, but also in performance.<br />
They have a built-in gyro for exceptional<br />
stability, and uses the new polymer battery technology<br />
for longer flight times. Requires 6 AA batteries (not<br />
included). Recharging takes place via the transmitter<br />
included and takes approximately 20 minutes for a<br />
full charge. Flight duration: 7 to 10 minutes<br />
S108G ...........................(GRAY) ................... $21.95<br />
S109G ..........................(GREEN) .................. $21.95<br />
SYMA HITRON MH-68A HELICOPTER<br />
The MH-68A Stingray was the primary tactical helicopter<br />
of the The Helicopter Interdiction Tactical<br />
Squadron (HITRON) of the U.S. Coast Guard from its<br />
introduction into service in 2000 to 2008. Used as<br />
a drug interdiction aircraft, the Stingray was able to<br />
outrun even the fastest boat and was instrumental<br />
in intercepting over 900 vessels attempting to carry<br />
contraband to the United States. This SYMA replica<br />
beautifully captures the distinctive colors of the<br />
HITRON Stingray, plus it flies beautifully thanks to its<br />
gyro controls. Requires 6 AA batteries (not included).<br />
Flight time is approximately 5-7 minutes per charge.<br />
S111G ......................................................... $21.95<br />
SYMA MICRO HELICOPTER<br />
We call this little guy “mosquito” because it’s so itsy<br />
bitsy teeny weeny. And really kinda cute (in a manly<br />
way, of course). At only 4 inches it’s about half the<br />
size of the other mini helicopters and it flys like the<br />
dickens! It’s gyro-stablized for rock steady flight, and<br />
can stay aloft for up to 6 minutes on a full charge.<br />
This little guy is so cool, you’re going to want to show it<br />
off at work. Best of all, its small enough to stash away<br />
in your toolbox when the boss comes around.<br />
S110-R ............................ (RED) .................... $21.95<br />
S110-O ....................... (ORANGE) ................ $21.95<br />
SYMA S107G RC GYRO HELICOPTER<br />
The Syma brand is synonymous with top quality<br />
among mini helicopter hobbyists. And the S107 is<br />
legendary for its sturdy construction and steady flight.<br />
Now comes the S107G with a new gyro system and<br />
a heftier battery for longer flights. The S107G fly like a<br />
dream and even beginners will master it in no time<br />
at all. Requires 6 AA batteries (not included). Flight<br />
time is approximately 7 minutes on a full charge.<br />
S107G-G ......................(GREEN) .................. $21.95<br />
S107G-R ......................... (RED) .................... $21.95<br />
S107G-W .......................(WHITE) .................. $21.95<br />
MISSILE FIRING GYRO HELICOPTER<br />
You know, there comes a time when strafing the<br />
spouse, and terrorizing the family pet with your helicopter<br />
just doesn’t have the same magic it used<br />
to have. The cat isn’t so scared anymore, and your<br />
spouse now completely ignores your flying antics. So<br />
what’s a prankster to do? Well, we have one word for<br />
you -- missiles. Rekindle those good times by raining<br />
hellfire fury on kitty when he least expects it. And for<br />
good measure, see if you can pop off a couple into<br />
your partner’s coffee cup and still live to talk about<br />
it. Good times for sure. These little gyro helicopters<br />
will fire up to 6 missiles either one at a time, or in<br />
rapid succession all at your command. Need we say<br />
more? Tons of harmless fun. Flies for about 6 minutes<br />
per charge. Carries 6 missiles at a time but comes<br />
with 8 just in case you loose one or two.<br />
WLV398-R ....................... (RED) .................... $21.95<br />
WLV398-G ....................(GREEN) .................. $21.95<br />
23<br />
www.aircraft-tool.com
24<br />
1-800-248-0638<br />
Free shipping on any<br />
order over $75<br />
• Applies only to items featured in this sale<br />
• Does not include motor freight products<br />
• Order by Dec. 17th for Christmas Delivery<br />
• Order must ship via UPS Ground or Priority<br />
Mail to addresses in the United States<br />
• All orders must be prepaid in order to received<br />
free shipping<br />
How EZ Pay Works<br />
We understand that mechanics<br />
and homebuilders are often on<br />
tight budgets. So, we’ve made<br />
it easier than ever to get the tools you need to<br />
get the job done, using our EZ Payment Plan.<br />
Simply place your order today for any of the<br />
qualified riveting kits featuring the EZ Pay logo,<br />
and we’ll split the sale price into 3 equal monthly<br />
payments.<br />
When placing your order by telephone, simply<br />
say “EZ Pay” and we’ll take care of the rest. If<br />
you prefer to order online, then use the code:<br />
EZ2012 on your shopping cart page.<br />
Our EZ Pay plan is available only to customers<br />
paying with a credit card. Additionally, the EZ<br />
Pay plan offer is valid only during this sale, so<br />
place your order now while there’s still time.<br />
Mystery Gift Details<br />
This year we will be selecting<br />
20 Lucky Customers to<br />
win one of our Free MYS-<br />
TERY GIFTS. Just go to our<br />
website and sign up today. The drawing will be<br />
held December 17th. Just in time to get your<br />
Free gift under the tree for Christmas.<br />
Gift Wrapping on Us!<br />
Place an order of $50 or more,<br />
and let the ATS Elves wrap your<br />
gifts for you! It’s one less thing<br />
for you to worry about during the busy Holiday<br />
Season, and we’re happy to help. Just let us<br />
know, and we’ll take care of everything.<br />
MEYER HYDRAULICS ® AIRCRAFT JACK<br />
Hot Jack<br />
Sale!<br />
Visit our website at www.aircraft-tool.com for your aiplane specs.<br />
SAVE<br />
up to<br />
$ 440!<br />
Meyer Hydraulics <strong>Aircraft</strong> Jacks have served the general aviation industry for over 45<br />
years. Professional mechanics and service technicians all over the world rely on Meyer<br />
Jacks to confidently lift propeller, and jet aircraft with the security and features one should<br />
demand in aircraft jacks.<br />
A complete lifting system to handle most light aircraft. Includes two (2) A422 jacks; (2)<br />
A434 jacks; (2 sets) AJL extension legs; (2) AT42228 slide tubes; (2) AT42234 slide tubes;<br />
(2) AT43454 slide tubes; (2) ATC-4 extension caps; (2) ATC-8 extension caps; and (1) ATS<br />
tail stand. The AJS2 Deluxe Jack Set includes an extra A422 jack; (1) AT42228 slide tube,<br />
and (1) ATC-4 cap to support ALL retractable gear aircraft up to 8,000 pounds. The AJS3<br />
Premium Set adds (2) extra A427 jacks.<br />
No. AJS .......................................(Standard Set) ........................$3,315.95 ...$2,984.95<br />
No. AJS2 .......................................(Deluxe Set) ..........................$3,965.95 ...$3,569.95<br />
No. AJS3 ..................................... (Premium Set) ........................$4,415.95 ...$3,974.95<br />
*Meyer Jacks are NOT included in the free shipping offer. Freight charges WILL apply to all jack orders.<br />
AJS3<br />
Pictured<br />
All of us at ATS would like to wish you a happy and warm holiday,<br />
and thank you for a great year.