400W / 500W Series Display Interfaces - Garmin

More documents

Recommendations

Info

Section 3 Skywatch Interface to the right of the symbol. From the Map Page, you can display traffic in a thumbnail format in any of the top three data fields (top four fields on the 500W Series) on the right side of the Map Page. When a Traffic Advisory is active, the “Traffic” banner is displayed in the lower right corner of the Map Page. To display Thumbnail Traffic on the Map Page 1. Turn the small right knob to select the Map Page. 2. Press MENU to display the Page Menu. 3. Turn the small right knob to select ‘Change Fields?’ and press ENT. 4. Select one of the top three fields (top four fields on the 500W Series). Select TRFC from the Select Field Type List and press ENT. Note that the thumbnail range defaults to 6 NM and cannot be changed. Highlighting Traffic Data Using Map Panning Another map page function is panning, which allows you to move the map beyond its current limits without adjusting the map scale. When you select the panning function—by pressing the small right knob—a target pointer flashes on the map display. A window also appears at the top of the map display showing the latitude/longitude position of the pointer, plus the bearing and distance to the pointer from your present position. 14 190-00356-31 Rev. D When the target pointer is placed on traffic, the traffic range and altitude separation are displayed. To select the panning function and pan the map display: 1. Press the small right knob to activate the panning target pointer. 2. Turn the small right knob clockwise to move up, or turn it counterclockwise to move down. 3. Turn the large right knob clockwise to move right, or turn it counterclockwise to move left. 4. To cancel the panning function and return to your present position, press the small right knob. When the target pointer is placed on traffic, the traffic range and altitude separation are displayed. The traffic is identified as: TA: Traffic Advisory, PA: Proximity Advisory, TRFC: Other Traffic Monitoring Traffic See the information in the SKYWATCH Pilot’s Guide regarding monitoring traffic on the display and the corresponding actions to take.
Failure Response Errors indicated by a “FAILED” message on the screen prevent continued use of the SKYWATCH. Please see the L-3 SKYWATCH Pilot’s Guide for detailed information on Failure Response. Description of Traffic Advisory Criteria For a description of Traffic Advisory criteria and display interpretation, please see the SKYWATCH Pilot’s Guide. The SKYWATCH Pilot’s Guide contains detailed information on traffic advisory and display interpretation. 190-00356-31 Rev. D Section 3 Skywatch Interface 15
Page 1 and 2: 400W / 500W Series Display Interfac
Page 3 and 4: 190-00356-31 Rev. D Foreward Warnin
Page 5 and 6: SECTION 1: INTRODUCTION The Garmin
Page 7 and 8: Displaying Storm Data on the Map Pa
Page 9 and 10: Clearing the Map Page Routinely cle
Page 11 and 12: Lightning Display The Lightning Pag
Page 13 and 14: To begin tracking intruder aircraft
Page 15: NOTE: SKYWATCH data is only display
Page 19 and 20: 9900B (TCAD) Symbols TRFC (White)
Page 21 and 22: Ryan TCAD Setup Page (9900B only) T
Page 24: © 2009 Garmin Ltd. or its subsidia

400W / 500W Series Display Interfaces - Garmin

Create successful ePaper yourself

Delete template?

Save as template?