Freedom 2100 Motor Control Center Installation - emsco
Freedom 2100 Motor Control Center Installation - emsco
Freedom 2100 Motor Control Center Installation - emsco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
33 I.B. 8926-1A<br />
20 Inches Wide, 21 Inches Deep<br />
Front and Rear Mounted (4710A32)<br />
1. Minimum length of anchor bolt is 2.00". (.38-16 grade 5 torqued at 31lb-ft).<br />
A. For non seismic, mount with 2 center bolts per enclosure.<br />
B. For seismic, mount with min 4 corner bolts per enclosure.<br />
2. Recommended maximum conduit height above floor line is 3.50 inches.<br />
3. Maximum conduit space with channel sills is 17.50 X 9.73 inches.<br />
4. For multiple structure assemblies either one or both of these members are removed to provide<br />
maximum unrestricted conduit space at the bottom of the MCC.<br />
5. This conduit space is not recommended when a neutral bus is required. Otherwise available.<br />
See side View B. far right for vertical dimensions<br />
10 Inches Wide, 16 or 21 Inches Deep<br />
Transition Structure (4710A35/6)<br />
1. Minimum length of anchor bolt is 2.00". (.38-16 grade 5 torqued at 31lb-ft).<br />
A. For non seismic, mount with 2 center bolts per enclosure.<br />
B. For seismic, mount with min 4 corner bolts per enclosure.<br />
2. Recommended maximum conduit height above floor line is 3.50 inches.<br />
3. Maximum conduit space with channel sills is 17.50 X 9.73 inches.<br />
4. For multiple structure assemblies either one or both of these members are removed to provide<br />
maximum unrestricted conduit space at the bottom of the MCC.<br />
5. This conduit space is not recommended when a neutral bus is required. Otherwise available.<br />
Common Notes<br />
SIDE VIEW A<br />
7. Master Terminal Block assembly is furnished for type Type C wiring only when location<br />
not specified. MTB supplied at the bottom.<br />
8. Rear horizontal bus barrier not supplied with front mounted only structure.<br />
9. Standard structure arrangement<br />
(a) In Front<br />
Without MTB: A & B = 9”<br />
With MTB at bottom: A & B = 9”<br />
With MTB at top: A & B = 3”<br />
(b) In Rear<br />
Without MTB: C = 0, D = 72”, E = 3”<br />
With MTB at bottom: C = 0, D = 66”, E = 9”<br />
With MTB at top C = 12, D = 60”, E = 3”<br />
SIDE VIEW B<br />
SIDE VIEWS