Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
▪ 4-Port 2A Supply (Does not detect at all during boot or after boot- no messages)<br />
[IC = Alcor Micro Corp (AU6254)]<br />
▪ Fosmon<br />
▪ 7-Port USB 2.0 Hub w/ 1A Power Supply (Causes interference with other USB<br />
devices and sends enough power to light up the pi with it's Micro USB cable<br />
unplugged).<br />
▪ Gear Head<br />
▪ UH7250MAC 7-port powered hub. Internally, two daisy-chained Genesys Logic<br />
05e3:0608 devices. Causes Ethernet instability when used under very specific<br />
circumstances, in X11.<br />
▪ UH5200T 4-port powered hub. As of 2012-08-16 Wheezy, if any USB 1.x device<br />
(a keyboard, for example) is plugged into this hub, Ethernet stops, and USB<br />
interrupts for other devices get dropped (keys repeating forever), etc. Occurs even<br />
if power is not attached (not a power leakage problem). Appears working after a<br />
bootloader and/or firmware update on 9/12. Also, turned out to be somewhat<br />
more specific to the combination of two particular low-speed devices.<br />
▪ Hama<br />
▪ 4-Port USB 2.0 "bus hub", model 78496 (?). Only works for low power devices<br />
(card readers?), but does not work for power hungry devices (HDD,WLAN).<br />
Doesnt boot when hub connected to <strong>RPi</strong>. The funniest thing is that <strong>RPi</strong> powers on<br />
when I plug in this hub to normal size USB port (not that small dedicated port).<br />
idVendor=05e3, idProduct=0608<br />
▪ Kensington<br />
▪ iBall<br />
▪ 7-Port Dome Hub model no 1500129 (Possible problems with malfunctioning<br />
keyboard, kills mouse when GUI started).<br />
▪ Piano 423 4-Port USB hub. Listed in lsusb as Genesys Logic. Fails to deliver<br />
enough power to connected devices even when using AC power suply.<br />
▪ Inland<br />
▪ 4-Port USB 2.0 Cable Hub model no 480426 (Some devices work, some don't,<br />
cheap unshielded untwisted wire design)<br />
▪ Logik<br />
▪ LP7HUB11 7-Port USB Hub. (Ethernet failed, slow response, in LXDE.<br />
Happened whether or not the hub's independent power supply was connected to<br />
the hub.)<br />
▪ Soniq<br />
▪ 4-Port 5V supply. Model number CUH100. (B). Appears to draw power away<br />
from the Raspberry Pi, even when the Pi has an isolated power line. Netgear<br />
WNA1100 WiFi Adapter (which is known to work in other setups is recognized,<br />
but unresponsive.
Change language