RPi Easy SD Card Setup - eLinux.org

Recommendations

Info

P1-06 GND GND P1-08 GPIO 14 GPIO 14 Boot to Alt 0 -> UART0_TXD ALT5 = UART1_TXD P1-10 GPIO 15 GPIO 15 Boot to Alt 0 -> UART0_RXD ALT5 = UART1_RXD P1-12 GPIO 18 GPIO 18 P1-14 GND GND P1-16 GPIO23 GPIO23 P1-18 GPIO24 GPIO24 P1-20 GND GND ALT4 SPI1_CE0_N ALT5 = PWM0 ALT3 = SD1_CMD ALT4 = ARM_RTCK ALT3 = SD1_DATA0 ALT4 = ARM_TDO P1-22 GPIO25 GPIO25 ALT4 = ARM_TCK P1-24 GPIO08 GPIO08 SPI0_CE0_N P1-26 GPIO07 GPIO07 SPI0_CE1_N Header Pinout, bottom row: Pin Pin Name Pin Name Number Rev1 Rev2 P1-01 3.3 V 3.3 V P1-03 GPIO 0 GPIO 2 P1-05 GPIO 1 GPIO 3 Hardware Notes 50 mA max (01 & 17) 1K8 pull up resistor 1K8 pull up resistor Alt 0 Function Other Alternative Functions I2C0_SDA I2C0_SDA / I2C1_SDA I2C0_SCL I2C0_SCL / I2C1_SCL P1-07 GPIO 4 GPIO 4 GPCLK0 P1-09 GND GND P1-11 GPIO17 GPIO17 ALT3 = UART0_RTS, ALT5 = UART1_RTS P1-13 GPIO21 GPIO27 PCM_DIN ALT5 = GPCLK1 P1-15 GPIO22 GPIO22 P1-17 3.3 V 3.3 V 50 mA max (01 & 17) P1-19 GPIO10 GPIO10 SPI0_MOSI P1-21 GPIO9 GPIO9 SPI0_MISO P1-23 GPIO11 GPIO11 SPI0_SCLK P1-25 GND GND ALT3 = SD1_CLK ALT4 = ARM_TRST
Colour legend +5 V +3.3 V Ground, 0V UART GPIO SPI I²C KiCad symbol: File:Conn-raspberry.lib [9] Pin 3 (SDA0) and Pin 5 (SCL0) are preset to be used as an I²C interface. So there are 1.8 kilohm pulls up resistors on the board for these pins. [10] Pin 12 supports PWM (http://en.wikipedia.org/wiki/Pulse-width_modulation) . It is also possible to reconfigure GPIO connector pins P1-7, 15, 16, 18, 22 (chipset GPIOs 4 and 22 to 25) to provide an ARM JTAG interface. [11] However ARM_TMS isn't available on the GPIO connector (chipset pin 12 or 27 is needed). Chipset pin 27 is available on S5, the CSI camera interface however. It is also possible to reconfigure GPIO connector pins P1-12 and 13 (chipset GPIO 18 and 21) to provide an I2S (a hardware modification may be required [12] ) or PCM interface. [13] However, PCM_FS and PCM_DIN (chipset pins 19 and 20) are needed for I2S or PCM. A second I²C interface (GPIO02_ALT0 is SDA1 and GPIO03_ALT0 is SCL1) and two further GPIOs (GPIO05_ALT0 is GPCLK1, and GPIO27) are available on S5, the CSI camera interface. Referring to pins on the Expansion header The header is referred to as "The GPIO Connector (P1)". To avoid nomenclature confusion between Broadcom signal names on the SoC and pin names on the expansion header, the following naming is highly recommended. ▪ The expansion header is referred to as "Expansion Header" or "GPIO Connector (P1)"
Page 1 and 2:
RPi Easy SD Card Setup From eLinux.
Page 3 and 4:
Easy way To write your SD card you
Page 5 and 6:
where flashnul.exe -L 1. ▪ Flas
Page 7 and 8:
However if you are curious as to th
Page 9 and 10:
(or other odd characters, for that
Page 11 and 12:
vi /etc/fstab ▪ Enter a line exac
Page 13 and 14:
Where to start? Any easy question t
Page 15 and 16:
If you're unsure of which locale to
Page 17 and 18:
Debian Wheezy, using raspi-config D
Page 19 and 20:
Media Player With this configuratio
Page 21 and 22:
▪ Entering "sudo apt-get install
Page 23 and 24:
Tutorials - Guides - Projects - Tas
Page 25 and 26:
the problem has been mitigated some
Page 27 and 28:
out cheaper to buy a new monitor.)
Page 29 and 30:
Note: If a Netgear router has a bla
Page 31 and 32:
Connecting Together You can use the
Page 33 and 34:
RPi Peripherals From eLinux.org Set
Page 35 and 36:
▪ Start the adapter sudo ifup wla
Page 37 and 38:
sudo ifup wlan0 Then there may be a
Page 39 and 40:
For more info about DVI, VGA, and S
Page 41 and 42:
RGB analog/VGA The Broadcom BCM2835
Page 43 and 44:
▪ Analog Devices HDMI Receivers (
Page 45 and 46:
Model Wizard - Buying Guide - SD Ca
Page 47 and 48:
Back to the Hub. Software & Distrib
Page 49 and 50:
Comparison
Page 51 and 52:
OpenELEC (http://openelec.tv/ compo
Page 53 and 54:
Arch Arch Linux ARM (http://archlin
Page 55 and 56:
•Added rndis_wlan wifi driver (br
Page 57 and 58:
ha-pi ▪ Main Site (https://source
Page 59 and 60:
support for changing the user and h
Page 61 and 62:
Mes (Marshmallow Entertainment Syst
Page 63 and 64:
RPi VerifiedPeripherals From eLinux
Page 65 and 66:
A note about this page: For USB dev
Page 67 and 68:
Powered USB Hubs A number of low-co
Page 69 and 70:
ArchLinux, didn't work with Bodhi L
Page 71 and 72:
▪ [14] (http://plugable.com/produ
Page 73 and 74:
▪ Dell ▪ F5U404 Hi-Speed USB 2.
Page 75 and 76:
▪ Targus ▪ ACH115EU 7-port powe
Page 77 and 78:
▪ SK-9625 Multimedia Keyboard (B)
Page 79 and 80:
▪ EBO-013 Wireless 2.4GHz compact
Page 81 and 82:
▪ 21840 (Wireless RF 2.4GHz Micro
Page 83 and 84:
▪ Motorola ▪ ▪ Bluetooth wire
Page 85 and 86:
▪ Sweex ▪ KB060UK (http://www.s
Page 87 and 88:
▪ Wired Multimedia Keyboard Model
Page 89 and 90:
▪ Asda ▪ HM5058 (Smart Price) W
Page 91 and 92:
▪ Microsoft ▪ Comfort Curve Mou
Page 93 and 94:
▪ Logitech G400 Gaming Mouse - 10
Page 95 and 96:
download (http://www.element14.com/
Page 97 and 98:
non-free repository. (However I exp
Page 99 and 100:
▪ ▪ edup nano EP-N8508 (http://
Page 101 and 102:
▪ inner 02 joggler wifi usb RT277
Page 103 and 104:
variant (http://learn.adafruit.com/
Page 105 and 106:
▪ RiiTek RT-MWK02+ - comes with a
Page 107 and 108:
The adapter seems to work without a
Page 109 and 110:
▪ DVB-T205, based on rtl2832u chi
Page 111 and 112:
▪ QuickCam Pro 9000 - powered by
Page 113 and 114:
USB UART and USB to Serial (RS-232)
Page 115 and 116:
▪ Contents of floppy now availabl
Page 117 and 118:
▪ 5V 2.1A USB charger for iPad2,
Page 119 and 120:
▪ 5V 1A dual USB power supply, mo
Page 121 and 122:
Problem power Adapters ▪ Masterpl
Page 123 and 124:
HDMI->VGA converter boxes Most will
Page 125 and 126:
And another one: http://cgi.ebay.pl
Page 127 and 128:
cd /sys/class/mmc_host/mmc?/mmc?:*
Page 129 and 130:
▪ 32GB SDHC Class 10 (man:0x00000
Page 131 and 132:
▪ 4GB SDHC Class 6 Platinum II (f
Page 133 and 134:
▪ pqi ▪ 4GB SDHC Class 4. Micro
Page 135 and 136:
234c19de7cbaaf4997671d61df20a057590
Page 137 and 138:
▪ 16GB SDHC Class 10 SD-T16G (104
Page 139 and 140:
▪ 16GB SDHC Class 6 (Possibly SD5
Page 141 and 142: ▪ 2GB Ultra || 15MB/s (BE08287132
Page 143 and 144: Note that the following error is so
Page 145 and 146: R-Pi Troubleshooting From eLinux.or
Page 147 and 148: Red power LED is blinking The red p
Page 149 and 150: Coloured splash screen With recent
Page 151 and 152: Some users have reported that their
Page 153 and 154: Copyright (c) 2012 Broadcom version
Page 155 and 156: Networking Ethernet connection is l
Page 157 and 158: As of 1 September 2012, this fault
Page 159 and 160: Speaker-test -c 2 -s 1 -t wav -W /u
Page 161 and 162: Can only get 800x480 resolution in
Page 163 and 164: Edit the configuration file, see th
Page 165 and 166: Composite displays no image The out
Page 167 and 168: sudo apt-get update Troubleshooting
Page 169 and 170: 3. Turn your board over and find th
Page 171 and 172: Board ver. RAM Chip USB Chip BS12xx
Page 173 and 174: ▪ This page was last modified on
Page 175 and 176: Here is an example file # Set stdv
Page 177 and 178: hdmi_ignore_cec Pretends CEC is not
Page 179 and 180: hdmi_mode=18 1024x768 75Hz hdmi_mod
Page 181 and 182: Which values are valid for my monit
Page 183 and 184: Overclocking WARNING: Setting any o
Page 185 and 186: enables dynamic clocks and voltage
Page 187 and 188: Retrieved from "http://elinux.org/i
Page 189 and 190: Hardware and Hardware History. Low-
Page 191: Each GPIO can interrupt, high/low/r
Page 195 and 196: GPIO02, 03, 05 and 27 are available
Page 197 and 198: GPIO as input or output and change
Page 199 and 200: Make sure pointer is on 4K boundary
Page 201 and 202: GPIO Driving Example (Java) This us
Page 203 and 204: gpio export 17 out gpio export 18 i
Page 205 and 206: # call set_debug(1) to do a non-des
Page 207 and 208: References 1. ↑ http://www.raspbe
Page 209 and 210: RaspberryPi Boards From eLinux.org
Page 211 and 212: Model B:
Page 213 and 214: BS1218 Samsung ? BH1208 BH1219 BH12
Page 215 and 216: BH1218 Hynix SMSC BH1218 Hynix SMSC
Page 217 and 218: BS1224 BS1218 BS1222 BS1232 BS1228
Page 219 and 220: RPi Hardware From eLinux.org Back t
Page 221 and 222: Components (Provisional - some of t
Page 223 and 224: ▪ S8: SD/MMC/SDIO memory card slo
Page 225 and 226: ▪ Board B: 5V, 700 mA (3.5W) with
Page 227 and 228: ▪ If the PSU is unregulated it ca
Page 229 and 230: work initially but be unreliable be
Page 231 and 232: 4. ↑ RPiBlog Post: High-res pics
Page 233 and 234: Cheap PSU Cheap PSU - inside So ins
Page 235 and 236: With this values (R1=1k, R2=100) ad
Page 237 and 238: Mobile battery power supply options
Page 239 and 240: RPi Documentation From eLinux.org B
Page 241 and 242: Beta Boards: Gert's Beta Boards Mec
Page 243:
Retrieved from "http://elinux.org/i
show all

RPi Easy SD Card Setup - eLinux.org

Create successful ePaper yourself

Delete template?

Save as template?