RPi Easy SD Card Setup - eLinux.org

Recommendations

Info

▪ 16GB SDHC Class 10 Extreme (30MB/s HD Video) (SDSDX3-016G-X46) - Doesn't boot with debian6-19-04-2012.img, or newer firmware (tested 2012-06-17). ▪ 16GB SDHC Class 6 Ultra (BL1202021933G) ▪ 16GB SDHC Class 6 Ultra I (BL1205921933G) - Boots kernel but won't run init ( mmc timeout waiting for interrupt ) ▪ Silicon Power ▪ 8GB SDHC Class 10 (SP008GBSDH010V10) - Boots kernel but won't run init (mmc timeout waiting for interrupt ) - Tested 20/11/2012, 2012-10-28-wheezyraspbian.img with Nov 20 kernel. ▪ 32GB SDHC Class 6 (LS2N732GQON03ASP) - boots debian6-19-04-2012.img, but frequent slow response / system hangs. ▪ TDK ▪ 4GB SDHC Class 6 (S404G1041) - Tried (end May 2012) with new kernel.img and start.elf [53] (https://github.com/raspberrypi/firmware/tree/master/boot) but still won't run init. ▪ 4GB SDHC Class 6 (S404G1046) [Barcode: 4 902030 784447] - Tried (4th June 2012) with debian6-19-04-2012.img and with replacement kernel.img and start.elf from github [54] (https://github.com/raspberrypi/firmware/tree/ 87a04c0be0c05e20f94f223183a0310b37c9bd89/boot) but still got 'Error -84' and 'Kernel panic - not syncing: No init found' ▪ Transcend ▪ 2GB MicroSD (MMAGR02GUECA-MB) - reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu'). Still seems to work, but is *very* slow after this happens, even across reboots. ▪ 32GB MicroSD (TS32GUSDHC4) - Doesn't boot. ▪ 2GB SD (6451AG 2G O2DS1) ▪ 16GB SD Class10 (TS16GSDHC10U1) - Doesn't Boot, show that "kernel panic - not syncing attempted to kill init" ▪ Veho ▪ 4GB SDHC Class 6 ▪ Verbatim ▪ 16GB SDHC Class 6 (47178) - Raspbian Pisces RC3 - boots, but after login: mmc timeout waiting for interrupt ▪ 8GB microSD Class 10 (44012) - ArchLinux - boots, but after system update develops segmentation faults ▪ 8GB SDHC Class 10 (Premium) - Tested with September release of Raspbian and Debian Wheezy - both fail to boot with mmc errors. The usual warnings against less reputable sellers (such as Ebay merchants) apply.
Note that the following error is sometimes accompanied with a non-working SD card after booting (on Debian): mmc0: timeout waiting for hardware interrupt Benchmarks ▪ http://www.sakoman.com/OMAP/microsd-card-perfomance-test-results.html ▪ http://usbspeed.nirsoft.net/usb_drive_speed_summary.html?o=11 ▪ http://www.raspberrypi.org/phpBB3/viewtopic.php?f=2&t=4076 ▪ http://forum.xda-developers.com/showthread.php?t=1005633 (Doesn't originate from R-Pi, but very related) Foreign Language Translations ▪ Ru:RaspberryPiBoardVerifiedPeripherals References 1. ↑ http://www.raspberrypi.org/forum/absolute-beginners/cheap-powered-usb-hubuk/#p76452 2. ↑ http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernalpanic/page-2 3. ↑ http://www.raspberrypi.org/forum/troubleshooting/keyboard-creates-kernalpanic/page-2 4. ↑ http://www.cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/ USBPowerSupplies.html 5. ↑ http://www.cpmspectre.pwp.blueyonder.co.uk/raspberry_pi/MoinMoinExport/ USBPowerSupplies.html Raspberry Pi Model Wizard - Buying Guide - SD Card Setup Startup - Basic Setup - Advanced Setup - Beginners Guide - Troubleshooting Hardware - Hardware History - Low-level Hardware peripherals - Expansion Boards Peripherals Screens - Cases - Other Peripherals Software - Distributions - Kernel - Performance Software - Programming - VideoCore APIs Tutorials - Guides - Projects - Tasks - Projects DataSheets - Education - Communities
Page 1 and 2:
RPi Easy SD Card Setup From eLinux.
Page 3 and 4:
Easy way To write your SD card you
Page 5 and 6:
where flashnul.exe -L 1. ▪ Flas
Page 7 and 8:
However if you are curious as to th
Page 9 and 10:
(or other odd characters, for that
Page 11 and 12:
vi /etc/fstab ▪ Enter a line exac
Page 13 and 14:
Where to start? Any easy question t
Page 15 and 16:
If you're unsure of which locale to
Page 17 and 18:
Debian Wheezy, using raspi-config D
Page 19 and 20:
Media Player With this configuratio
Page 21 and 22:
▪ Entering "sudo apt-get install
Page 23 and 24:
Tutorials - Guides - Projects - Tas
Page 25 and 26:
the problem has been mitigated some
Page 27 and 28:
out cheaper to buy a new monitor.)
Page 29 and 30:
Note: If a Netgear router has a bla
Page 31 and 32:
Connecting Together You can use the
Page 33 and 34:
RPi Peripherals From eLinux.org Set
Page 35 and 36:
▪ Start the adapter sudo ifup wla
Page 37 and 38:
sudo ifup wlan0 Then there may be a
Page 39 and 40:
For more info about DVI, VGA, and S
Page 41 and 42:
RGB analog/VGA The Broadcom BCM2835
Page 43 and 44:
▪ Analog Devices HDMI Receivers (
Page 45 and 46:
Model Wizard - Buying Guide - SD Ca
Page 47 and 48:
Back to the Hub. Software & Distrib
Page 49 and 50:
Comparison
Page 51 and 52:
OpenELEC (http://openelec.tv/ compo
Page 53 and 54:
Arch Arch Linux ARM (http://archlin
Page 55 and 56:
•Added rndis_wlan wifi driver (br
Page 57 and 58:
ha-pi ▪ Main Site (https://source
Page 59 and 60:
support for changing the user and h
Page 61 and 62:
Mes (Marshmallow Entertainment Syst
Page 63 and 64:
RPi VerifiedPeripherals From eLinux
Page 65 and 66:
A note about this page: For USB dev
Page 67 and 68:
Powered USB Hubs A number of low-co
Page 69 and 70:
ArchLinux, didn't work with Bodhi L
Page 71 and 72:
▪ [14] (http://plugable.com/produ
Page 73 and 74:
▪ Dell ▪ F5U404 Hi-Speed USB 2.
Page 75 and 76:
▪ Targus ▪ ACH115EU 7-port powe
Page 77 and 78:
▪ SK-9625 Multimedia Keyboard (B)
Page 79 and 80:
▪ EBO-013 Wireless 2.4GHz compact
Page 81 and 82:
▪ 21840 (Wireless RF 2.4GHz Micro
Page 83 and 84:
▪ Motorola ▪ ▪ Bluetooth wire
Page 85 and 86:
▪ Sweex ▪ KB060UK (http://www.s
Page 87 and 88:
▪ Wired Multimedia Keyboard Model
Page 89 and 90:
▪ Asda ▪ HM5058 (Smart Price) W
Page 91 and 92: ▪ Microsoft ▪ Comfort Curve Mou
Page 93 and 94: ▪ Logitech G400 Gaming Mouse - 10
Page 95 and 96: download (http://www.element14.com/
Page 97 and 98: non-free repository. (However I exp
Page 99 and 100: ▪ ▪ edup nano EP-N8508 (http://
Page 101 and 102: ▪ inner 02 joggler wifi usb RT277
Page 103 and 104: variant (http://learn.adafruit.com/
Page 105 and 106: ▪ RiiTek RT-MWK02+ - comes with a
Page 107 and 108: The adapter seems to work without a
Page 109 and 110: ▪ DVB-T205, based on rtl2832u chi
Page 111 and 112: ▪ QuickCam Pro 9000 - powered by
Page 113 and 114: USB UART and USB to Serial (RS-232)
Page 115 and 116: ▪ Contents of floppy now availabl
Page 117 and 118: ▪ 5V 2.1A USB charger for iPad2,
Page 119 and 120: ▪ 5V 1A dual USB power supply, mo
Page 121 and 122: Problem power Adapters ▪ Masterpl
Page 123 and 124: HDMI->VGA converter boxes Most will
Page 125 and 126: And another one: http://cgi.ebay.pl
Page 127 and 128: cd /sys/class/mmc_host/mmc?/mmc?:*
Page 129 and 130: ▪ 32GB SDHC Class 10 (man:0x00000
Page 131 and 132: ▪ 4GB SDHC Class 6 Platinum II (f
Page 133 and 134: ▪ pqi ▪ 4GB SDHC Class 4. Micro
Page 135 and 136: 234c19de7cbaaf4997671d61df20a057590
Page 137 and 138: ▪ 16GB SDHC Class 10 SD-T16G (104
Page 139 and 140: ▪ 16GB SDHC Class 6 (Possibly SD5
Page 141: ▪ 2GB Ultra || 15MB/s (BE08287132
Page 145 and 146: R-Pi Troubleshooting From eLinux.or
Page 147 and 148: Red power LED is blinking The red p
Page 149 and 150: Coloured splash screen With recent
Page 151 and 152: Some users have reported that their
Page 153 and 154: Copyright (c) 2012 Broadcom version
Page 155 and 156: Networking Ethernet connection is l
Page 157 and 158: As of 1 September 2012, this fault
Page 159 and 160: Speaker-test -c 2 -s 1 -t wav -W /u
Page 161 and 162: Can only get 800x480 resolution in
Page 163 and 164: Edit the configuration file, see th
Page 165 and 166: Composite displays no image The out
Page 167 and 168: sudo apt-get update Troubleshooting
Page 169 and 170: 3. Turn your board over and find th
Page 171 and 172: Board ver. RAM Chip USB Chip BS12xx
Page 173 and 174: ▪ This page was last modified on
Page 175 and 176: Here is an example file # Set stdv
Page 177 and 178: hdmi_ignore_cec Pretends CEC is not
Page 179 and 180: hdmi_mode=18 1024x768 75Hz hdmi_mod
Page 181 and 182: Which values are valid for my monit
Page 183 and 184: Overclocking WARNING: Setting any o
Page 185 and 186: enables dynamic clocks and voltage
Page 187 and 188: Retrieved from "http://elinux.org/i
Page 189 and 190: Hardware and Hardware History. Low-
Page 191 and 192: Each GPIO can interrupt, high/low/r
Page 193 and 194:
Colour legend +5 V +3.3 V Ground, 0
Page 195 and 196:
GPIO02, 03, 05 and 27 are available
Page 197 and 198:
GPIO as input or output and change
Page 199 and 200:
Make sure pointer is on 4K boundary
Page 201 and 202:
GPIO Driving Example (Java) This us
Page 203 and 204:
gpio export 17 out gpio export 18 i
Page 205 and 206:
# call set_debug(1) to do a non-des
Page 207 and 208:
References 1. ↑ http://www.raspbe
Page 209 and 210:
RaspberryPi Boards From eLinux.org
Page 211 and 212:
Model B:
Page 213 and 214:
BS1218 Samsung ? BH1208 BH1219 BH12
Page 215 and 216:
BH1218 Hynix SMSC BH1218 Hynix SMSC
Page 217 and 218:
BS1224 BS1218 BS1222 BS1232 BS1228
Page 219 and 220:
RPi Hardware From eLinux.org Back t
Page 221 and 222:
Components (Provisional - some of t
Page 223 and 224:
▪ S8: SD/MMC/SDIO memory card slo
Page 225 and 226:
▪ Board B: 5V, 700 mA (3.5W) with
Page 227 and 228:
▪ If the PSU is unregulated it ca
Page 229 and 230:
work initially but be unreliable be
Page 231 and 232:
4. ↑ RPiBlog Post: High-res pics
Page 233 and 234:
Cheap PSU Cheap PSU - inside So ins
Page 235 and 236:
With this values (R1=1k, R2=100) ad
Page 237 and 238:
Mobile battery power supply options
Page 239 and 240:
RPi Documentation From eLinux.org B
Page 241 and 242:
Beta Boards: Gert's Beta Boards Mec
Page 243:
Retrieved from "http://elinux.org/i
show all

RPi Easy SD Card Setup - eLinux.org

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?