Data Hacking

232 Part III — Data Hacking
2. Create a folder called G7ToCE under the My Documents folder. Into that folder copy
the g7windatums.txt file (see Figure 10-14).
FIGURE 10-14: Create the appropriate
folder for the application.
3. Run G7ToCE. When you do this for the first time, an error message regarding a file
called g7toce.ini will be displayed (see Figure 10-15). This is normal.
FIGURE 10-15: Initial error message
displayed
4. You’ll fix this error now. Select File ➪ Configuration (see Figure 10-16).
5. Select the DMS tab (see Figure 10-17).
6. Select Save Configuration at Exit (see Figure 10-18). You may also change other parameters
at this stage if you want.