05.03.2013 Views

Data Hacking

Data Hacking

Data Hacking

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

120 Part I — Hardware Hacks<br />

9. After you have finished the molding and shaping process, you should have a holster that<br />

enables you to easily access or remove your GPS (see Figure 5-43).<br />

FIGURE 5-43: Testing the holster<br />

10. Finish off the edges with sandpaper to remove any sharp edges that might be on the<br />

holster.<br />

11. Now that the thermoplastic forming is completed, it’s time to add the fittings. Figure 5-44<br />

shows a belt loop called a Tek Lok (see www.blade-tech.com).<br />

12. To fit the Tek Lok, decide where you want it (I left a space for it on the template) or you<br />

can create a new piece and attach it with Chicago screws. Now mark (see Figure 5-45)<br />

and drill the holes for the Tek Lok.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!