Hertz%20General%20Catalogue%202012.pdf

INDEX
Mille 04
Hertz-Digital-Power.. .. .... .. ..10
Hi-Energy.. .. . .. .... .. .... .. .... .. . .. .... .. . .. . .. ... . 14
Hertz-Energy.. .. .... .. . .. .... .. .... .. . .. ... . 20
Energy.. .. .... .. .... .. .... .. . .. .... .. .... .. .... .. .... .. . .. .... .. ... 24
Dieci.. .. . .. .... .. .... .. . .. .... .. .... .. . .. .... .. .... .. .... .. . .. .... .. 32
SPL.. .. .... .. .... .. . .. . .. .... .. . .. .... .. . .. . .. . . .. .... .. . .. ... 38

00/00
1 TETOLON DOME
Tetolon Fibre dome features a hemispheric-hyperbolic
prole for maximum rigidity and linear frequency
response beyond the audible range.
2 NEODYMIUM MAGNET
In every component, the motor assembly is centred
upon a Neodymium ring, capable of operating in high
heat conditions. ML 280 tweeter is equipped with a
double Neodymium magnet. The use of a Neodymium
magnet generates extraordinary energy, for extremely
high performance.
3 ALUMINIUM VOICE COIL & COPPER RING
The central pole piece is covered with a pure copper
sleeve. This combined with its CCAW double layer
voice coil wound on a Kapton ® former provides a linear
150 x 283 x 43,5
(5.9 x 11.1 x 1.7)
150 x 283 x 43,5
(5.9 x 11.1 x 1.7)
impedance, ensuring maximum power handling and
frequency extension, even when listened to off axis.
4 RENEWED CROSSOVER
The highest quality components, the Rubber Touch
case, a passive cooling system and a three position
level control: these features make this crossover
unique.
5 ALUMINIUM MAIN STRUCTURE
The use of aluminium permits a perfect control, contri-
buting to the reduction of unwanted resonances and
residual vibrations.
The main structure and the rear acoustic chamber of
the tweeter are CNC machined from a solid aluminium
block. The basket is also made from anti-resonant
aluminium alloy.

28 (1.1)
70 (2.8)
180 (Hi-pass filtered @ 1.8 kHz - 12 dB Oct.) -
100 (Hi-pass filtered @ 250 Hz - 12 dB Oct.) -
165 (6.5) 250 125

165 (6.5)
165 (6.5) 70 (2.8)
70 (2.8) 28 (1.1)
28 (1.1)
28 (1.1)

MAXIMUM POWER,
MAXIMUM QUALITY,
MINIMUM SIZE
Hertz Digital Power project delivers high power levels while maintaining high
efficiency, in a compact footprint chassis size required in today’s modern
installations. It has inherited all the technologies which made HP successful,
with further advanced performance. More specifically, the D-Class technology
has evolved into a Full Range design to offer stunning musical performance
also with elevated power output.
10/11 www.hertzaudiovideo.com

1
4
1 MONITORING LEDs
4 LEDs monitor amplier status and
communicate with the user in real time.
This system, while allowing the amplier
to operate, also identies installation
faults and leads to eliminate them.
3 OPTIMIZED HEATSINK
The heatsink boasts extremely efcient
thermal conductivity, combined with
exclusive cosmetics: scratch-resistant
nish, end caps shaped for easy
handling, control panel accessible from
the top as well as a featured back lit
Hertz logo which can also be rotated.
2 3
2 HDP ELECTRONICS
Power supply stage featuring toroidal
transformers with multi-layered windings,
powerful TO220 (for HDP 1) and T220-
5pin with dual inside device (for HDP 4
and HDP 5) Mosfets.
4 HDP IN & ART
HDP IN system provides to interface
with any OEM (through the Speaker In)
and aftermarket (through the RCA In)
sources. Using Speaker In inputs, the
ART (Automatic Remote Turn On-Off)
function is available; the user can also
switch it off.

HDP 1
MONO D-CLASS AMPLIFIER
12/13
HDP
HRC
SUB VOLUME
REMOTE
CONTROL
OPTIONAL
1000 W
MAX POWER
HDP 4
FULL RANGE D-CLASS
FOUR-CHANNEL AMPLIFIER
1000 W
MAX POWER

HDP 5
FULL RANGE D-CLASS FIVE-CHANNEL AMPLIFIER
950 W
MAX POWER
6.7 x 13.5 x 1.8
AMP
171 x 344 x 46,70 171 x 284 x 46,70
171 x 344 x 46,70
6.7 x 11.2 x 1.8
6.7 x 13.5 x 1.8

20 (0.8)
25 (1.0)
28 (1.1)
70 (2.8)
165 (6.5)
165 (6.5)
100 (Hi-pass filtered @ 3.0 kHz - 12 dB Oct.) -
120 (Hi-pass filtered @ 2.5 kHz - 12 dB Oct.) -
180 (Hi-pass filtered @ 2.0 kHz - 12 dB Oct.) -
100 (Hi-pass filtered @ 250 Hz - 12 dB Oct.) -

130 (5.1)
165 (6.5)
165 (6.5)
25 (1.0)
25 (1.0)
28 (1.1)
165 (6.5) 70 (2.8) 25 (1.0)

130 (5.1)
165 (6.5)
20 (0.8)
20 (0.8)
(6.0 x 9.0) 28 (1.1)
20 (0.8)

250 (9.8)
300 (11.8)
380 (15.0)
250 (9.8)
300 (11.8)
380 (15.0)
65 (2.6)
65 (2.6)
65 (2.6)
65 (2.6)
65 (2.6)
65 (2.6)
23 (0.9)
23 (0.9)
23 (0.9)
23 (0.9)
23 (0.9)
23 (0.9)

20/21
1 DIE-CAST AND REFINED HEATSINK
Equipped with an optimized die-cast
heatsink for enhanced thermal performance,
HE ampliers feature vertical
ns besides the horizontal ns, used in
the traditional extruded heatsink.

2 HE STATUS LOGO
This technology allows the user to visually monitor the
status of the amplier in real time. The logo lights up of
a blue colour when the amplier is working correctly,
changing into an orange when it enters into protection
status.
3 HE IN
To interface the HE line with both OEM (Speaker In)
and aftermarket (RCA In). HE IN provides noise-free
installation in any type of system design.
When HE IN is used, ART, Automatic Remote Turn-On/Off
function, automatically turns on and off the amplier when
the OEM radio turns on and off.
4 HE ELECTRONICS
Underneath the heatsink, multiple winding transformers,
high current 105° C Electrolytic capacitors and low RDS-ON
mosfets are employed. HE 2 and HE 4 are equipped with
SANKEN TO3P output transistors, while HE 1D features a
Class D output stage based on solid TO247 power mosfets,
also employed in the Synchro D-Class circuit.

22/23
HE 1D.1
MONO D-CLASS AMPLIFIER
900 W
MAX POWER
HE 2.1
STEREO AB-CLASS AMPLIFIER
400 W
MAX POWER

HE 4.1
FOUR-CHANNEL AB-CLASS AMPLIFIER
800 W
MAX POWER
10.5 x 11.4 x 2.5 10.5 x 11.4 x 2.5 10.5 x 11.4 x 2.5

1 V-CONE ® The exponential prole gets very close
to a perfect one, providing exceptional dispersion.
2 ULTRA FLAT Small size and shallow depth for
installations without limits.
3 NEODYMIUM Small and powerful motor structure
with copper-covered pole, for maximum linearity and
energy.
24/25
4 RHFC TECHNOLOGY Provides the ability of
orienting tweeter direction according to the listening
point, for the benet of the high frequencies.
5 NON-PRESSED PAPER CONE on the EV 165L,
for the best energy trasfer at low end and mid
frequencies.

26/27
20 (0.8)
100 (3.9)
100 (5.1)
165 (6.5)
165 (6.5)
100 (Hi-pass filtered @ 3.5 kHz - 12 dB Oct.) -
150 (Hi-pass filtered @ 400 Hz - 12 dB Oct.) -

130 (5.4)
165 (6.5)
165 (6.5)
20 (0.8)
20 (0.8)
20 (0.8)
20 (0.8)
165 (6.5) 100 (3.9) 20 (0.8)

28/29

87 (3.4)
100 (3.9)
130 (5.1)
165 (6.5)
(5.0 x 7.0)
(6.0 x 9.0)
15 (0.6)
20 (0.8)
20 (0.8)
20 (0.8)
20 (0.8)
40 (1.6) 15 (0.6)

30/31
ES F25.5
SUBWOOFER
500 W
ES F20.5
SUBWOOFER
400 W
200 (7.9) 50 (2.0) 14,5 (0.6)
250 (9.8)
300 (11.8)
380 (15.0)
250 (9.8)
300 (11.8)
200 (7.9)
250 (9.8)
50 (2.0)
60 (2.4)
60 (2.4)
50 (2.0)
60 (2.4)
38 (1.5)
60 (2.4)
14,5 (0.6)
14,5 (0.6)
14,5 (0.6)
14,5 (0.6)
14,5 (0.6)
12 (0.5)
13 (0.5)

EBX F20.5
REFLEX SUB BOX
400 W
ES F20.5
ES F25.5
EBX F20.5
EBX F25.5
200 (7.9)
250 (9.8)
200 (7.9)
250 (9.8)
300 (11.8)
250 (9.8)
300 (11.8)
EBX F25.5
REFLEX SUB BOX
600 W
520 x 108 x 320
(20.5 x 4.3 x 12.6)
670 x 119 x 403
(24.6 x 4.7 x 15.9)
390 x 297 x 288
(15.4 x 11.7 x 11.3)
465 x 340 x 338
(18.3 x 13.4 x 13.3)
545 x 331 x 400
(21.5 x 13.0 x 15.7)

SATISFYING EVERY NEED,
IN EVERY CAR
A new landmark in his category for completeness of product range and accurate design.
Extended frequency response, wide off-axis dispersion, even higher efficiency and undistorted,
powerful sound with any sources in any cars.
32/33

1 HIGH EFFICIENCY TWEETER - Optimized geometry boasting
an efcient, highly linear annular acoustic lens along with a PEI
membrane that provides the best damping with a detailed, linear
sound.
2 TPU SURROUND - Exclusive TPU (Thermoplastic Polyurethane)
surround for resonance damping, also under high excursion.
3 V-CONE ® – The exponential prole gets very close to the perfect
one, providing exceptional dispersion.

DCX 87.3
2 WAY COAXIAL
60 W
DCX 165.3
2 WAY COAXIAL
120 W
34/35
Technical
Specifications
DCX 100.3
2 WAY COAXIAL
60 W
Size mm (in.)
Woofer Tweeter
Power Handling W
Peak Cont. program
DCX 130.3
2 WAY COAXIAL
80 W
DCX 170.3
2 WAY COAXIAL
100 W
Imp. Freq. Resp.
Hz
DCX 87.3 87 (3.4) 15 (0.6) 60 30 4 130 ÷ 21k 92
DCX 100.3
DCX 130.3
DCX 165.3
DCX 170.3
100 (4.0) 15 (0.6) 60 30 4 70 ÷ 21k 92
130 (5.0) 15 (0.6) 80 40 4 65 ÷ 21k 93
165 (6.5) 15 (0.6) 120 60 4 60 ÷ 21k 93
170 (6.7) 15 (0.6) 100 50 4 60 ÷ 21k 93
Sensitivity
dB/SPL
Magnet
WF/TW
High
density
flux
ferrite/
Neodymium
DCX 170.3
Cone/Dome
WF/TW
Waterrepellent
pressed
paper/
PEI

DCX 460.3
2 WAY COAXIAL
80 W
DCX 690.3
3 WAY COAXIAL
180 W
Technical
Specifications
Size mm (in.)
Woofer Tweeter Supertweeter
DCX 460.3 (4.0 x 6.0) 15 (0.6) -
80
DCX 570.3
DCX 690.3
DCX 710.3
Power Handling W
Peak Cont. program
DCX 570.3
2 WAY COAXIAL
120 W
DCX 710.3
3 WAY COAXIAL
300 W
Imp.
Freq. Resp.
Hz
40 4 65 ÷ 21k 93
(5.0 x 7.0) 15 (0.6) -
120 60 4 60 ÷ 21k 93
(6.0 x 9.0) 60 (2.5) 15 (0.6)
INCLUDED INCLUDED
180 90 4 45 ÷ 21k 93
(7.0 x 10.0) 60 (2.5) 15 (0.6) 300 150 4 40 ÷ 21k 93
Sensitivity
dB/SPL
Magnet
WF/TW
High
density
flux
ferrite/
Neodymium
Cone/Dome
WF/TW/ST
Water-repellent
pressed paper/
Water-repellent
pressed paper/
PEI

DT 24.3
TWEETER
80 W
36/37
DT 24.3
DV 170.3
DV 130.3
DV 165.3
DV 170.3
DS 250.3
DS 300.3
Technical
Specifications
Size mm (in.)
Woofer Tweeter
DT 24.3 -
24 (0.9)
DSK 130.3
DSK 165.3
DSK 170.3
DV 130.3
130 (5.0)
DV 165.3
165 (6.5)
DV 170.3
170 (6.7)
DT 24.3
24 (0.9)
DT 24.3
24 (0.9)
DT 24.3
24 (0.9)
DSK 130.3
2 WAY SYSTEM
120 W
Power Handling W
Peak Cont. program
Imp. Freq. Resp.
Hz
80 (Hi-pass filtered @ 3.5 kHz - 6 dB Oct.) - 4 3k ÷ 23k 94
120 60 4 60 ÷ 23k 93
160 80 4 50 ÷ 23k 93
160 80 4 50 ÷ 23k 93
DSK 165.3
2 WAY SYSTEM
160 W
DSK 170.3
2 WAY SYSTEM
160 W
Sensitivity
dB/SPL
Magnet
WF/TW
Cone/Dome
WF/TW
Crossover
included
Neodymium PEI 3,5 kHz @ 6 dB Oct
High
density
flux
ferrite/
Neodymium
Waterrepellent
pressed
paper/
PEI
3,5 kHz @ 12 dB Oct
3,5 kHz @ 12 dB Oct
3,5 kHz @ 12 dB Oct

DS 250.3
SUBWOOFER
400 W
DS 25.3
SUBWOOFER
300 W
DS 300.3
SUBWOOFER
600 W
INCLUDED INCLUDED
DBA 200.3 200 (8) 200 (8) x 2 140 4 32 ÷ 400 92
Voice Coil
DS 250.3 250 (10) 400 200 4 32 ÷ 400 90 50 (2.0)
DS 300.3 300 (12) 600 300 4 28 ÷ 300 93 50 (2.0)
DS 25.3 250 (10) 300 150 4 32 ÷ 400 89 38 (1.5)
DS 30.3 300 (12) 500 250 4 28 ÷ 300 91 38 (1.5)
Box Size
DS 30.3
SUBWOOFER
500 W
High density
ux ferrite
330 x 293 x 263
(13 x 11.6 x 10.4)
Polypropylene
with Mica
injection
DBA 200.3
SUB BOX
140 W
High density
ux ferrite
X-mech
17 (0.7)
17 (0.7)
16 (0.6)
16 (0.6)
Water-repellent
pressed paper

IMPRESSIVE SOUND
PRESSURE AND POWER
SPL Monster and SPL Show lines were designed according to the specific
needs of those teams who take part in SPL competitions and want to
dominate. A unique SPL project for the best performance in any application.
1 2
3 5/6
38/39
7
1 CCAR (Copper Clad Aluminium Ribbon) voice
coil features an extra-light aluminium membrane,
with high thermal dissipator.
2 An extremely powerful Neodymium magnet
is employed along with a highly efcient
compression loading horn, designed for
maximum high frequency acoustic pressure.
3 Midranges feature a copper covered central pole
and very light moving assembly, for an extremely
high SPL level and extended frequency range.
4 SV 200L is provided with the proprietary
V-cone ® technology, pulp cone with cotton bre
and long throw voice coil, for an amazing low
frequency impact and high SPL levels.
5 A dual spider design offers extreme control
during high excursions.
6 Four-layer aluminium voice coil, for unheard-of
thermal and mechanical capability and explosive
dynamics.
7 The power supply stage features 8 toroidal
transformers, 20 - 3300uF 105°Low ESR primary
capacitors for a total of 66 000uF; 32 - 160A
TO247 mosfets and 10 - 820uF secondary
capacitors capable of 200V. The output stage
features 20 - 190A/360V impulsive current mosfets.

MG 12
SUBWOOFER
MOBILE GROUP
8000 W
MM 12.1
UNLIMITED
SUBWOOFER MOTOR GROUP
MG 15 BASS
40/41
300 (12)
380 (15)
MG 15
SUBWOOFER
MOBILE GROUP
8000 W
MM 15.1
UNLIMITED
SUBWOOFER MOTOR GROUP
75 (3.0)
75 (3.0)
380 (15) 8000 2000 1,0 + 1,0 94 75 (3.0)
324 (12.8) 280 (11) 239 (9.4) 192 (7.6)
399 (15.7) 350 (13.8) 256 (10.1) 209 (8.3)
MG 15 BASS
SUBWOOFER
MOBILE GROUP
8000 W
RMA - Removable Moving Assembly
33,5 (1.3)
33,5 (1.3)
35 (1.4)

external
%, 100 Hz @ 4Ω
12.75 x 32.67 x 2.75
Direct Current: 4 x 1/0 AWG cables secured to the amplier through
4 x 2,5 mm thick copper buss bars connected directly to the printed
circuit board, to transfer power between battery and amplier with
very low contact resistance.
Hertz SPL Stack System stacks multiple ampliers thanks to the 6
supplied 2 mm robust iron brackets mounted on the threaded points
on the heatsink.

SV 165.1
SPL MIDRANGE
400 W
SV 200.1
SV 200L
SV 250.1
42/43
35 (1.4)
44 (1.7)
AFR 25 (OPTIONAL) AFR 35 (OPTIONAL)
SV 200.1
SPL MIDRANGE
500 W
100 (Hi-pass ltered @ 5 kHz - 12 dB Oct.)
100 (Hi-pass ltered @ 4.5 kHz - 12 dB Oct.)
100 (Hi-pass ltered @ 4.5 kHz - 12 dB Oct.)
3k ÷ 20k
2,5k ÷ 20k
2,5k ÷ 20k
SV 165.1 165 (6.5) 400 (Hi-pass ltered @ 200 Hz - 12 dB Oct.) - 100 ÷ 10k 97
500 (Hi-pass ltered @ 150 Hz - 12 dB Oct.)
500
500 (Hi-pass ltered @ 150 Hz - 12 dB Oct.)
-
-
-
-
-
100 ÷ 9k
45 ÷ 4,5k
90 ÷ 7k
100
101
35 (1.4)
44 (1.7)
38 (1.5)
38 (1.5)
50 (2)
50 (2)
SV 250.1
SPL MIDRANGE
500 W
High density
ux ferrite
Ultra Light Non Pressed Paper

SV 200L
SPL WOOFER
500 W
2,0 + 2,0
2,0 + 2,0
2,0 + 2,0
34 ÷ 800
28 ÷ 700
25 ÷ 600
65 (2.6)
65 (2.6)
65 (2.6)
23 (0.9)
23 (0.9)
23 (0.9)
90131107