LCD TV SERVICE MANUAL - TV & Monitor Service Manual Database
LCD TV SERVICE MANUAL - TV & Monitor Service Manual Database
LCD TV SERVICE MANUAL - TV & Monitor Service Manual Database
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1. Power Board<br />
1-1. The full flowchart for the voltage output<br />
Start check<br />
Does the whole<br />
screen appear?<br />
Yes<br />
Does the<br />
low pressure output<br />
appear?<br />
Yes<br />
Does the<br />
high tension output<br />
appear?<br />
Yes<br />
Does the<br />
high tension<br />
output voltage<br />
occur?<br />
Yes<br />
Manufacture’s model<br />
passage<br />
No<br />
No<br />
No<br />
TROUBLESHOOTING<br />
Is it<br />
identical to when the<br />
power is off?<br />
Yes<br />
1. Check the Power Off<br />
status.<br />
Does the<br />
St-by 5V signal<br />
appear?<br />
No<br />
3. Check the St-by 5V<br />
signal circuit.<br />
Does the<br />
VSC signal Vs-ON<br />
appear?<br />
No<br />
7. Check the VSC Vs-ON<br />
signal<br />
No<br />
Yes<br />
- 14 -<br />
Is the Interface<br />
signal operating?<br />
Yes<br />
2. Check the Interface<br />
signal status.<br />
Does the<br />
5V <strong>Monitor</strong> signal<br />
appear?<br />
No<br />
4. Check the 5V <strong>Monitor</strong><br />
signal circuit.<br />
When the<br />
Y, Z B/D Module<br />
When<br />
No<br />
input connector, does Power<br />
No removing the Y B/D No<br />
Board high tension<br />
Module input connector,<br />
output voltage drop?<br />
does output voltage<br />
drop?<br />
Yes<br />
9. Check the Power<br />
Board Output high<br />
tension circuit<br />
Yes<br />
Does the<br />
Vs, Va voltage output<br />
appear?<br />
No<br />
8. Check the Vs, Va<br />
voltage output circuit.<br />
Yes<br />
Yes<br />
10. Check the Z B/D<br />
Module output circuit<br />
Does the<br />
VSC signal RL-ON<br />
appear?<br />
No<br />
5. Check the VSC RL-ON<br />
signal.<br />
Does the<br />
VSC low pressure<br />
output appear?<br />
No<br />
6. Check the VSC low<br />
pressure output<br />
When<br />
removing the Z B/D<br />
Module input connector,<br />
does output voltage<br />
drop?<br />
Yes<br />
Yes<br />
11. Check the Y B/D<br />
Module output circuit