BULETINUL INSTITUTULUI POLITEHNIC DIN IAŞI - Universitatea ...

Bul. Inst. Polit. Iaşi, t. LVI (LX), f. 2, 2010 271
The fluid properties were selected from the Material Library Manager and
are presented in Fig. 9. The meshed model for the shoulder is illustrated in
Fig.10, while the meshed model for the shoulder and 3D fabric is presented in
Figure 11.
Fig. 9 – Selected air properties Fig. 10 – Meshed model
Fig. 11 – Meshed model for shoulder and fabric
The models were analyzed using finite elements, based on steady fluid flow
processor. The parameters considered are illustrated in Figs. 12 and 13.
Fig. 12 – Parameters for steady fluid flow Fig. 13 – Considered load curve