BULETINUL INSTITUTULUI POLITEHNIC DIN IAŞI - Universitatea ...

218 Dănuț Zahariea and Mihaela Tudorache
3. The Structural Analysis of the Sleeve Coupling
with Pins in two different Planes at 90°
For the sleeve coupling with pins in two different planes at 90 ° the analysis
procedures takes the same steps: creating the 3D model (Fig. 3a), configuring
the mesh (Fig. 3b), applying the restraints (Fig. 3c) and the loads (Fig. 3d),
applying the interaction conditions (Fig. 3e), running the analysis and results
visualization for both shafts (Fig. 3f – scale factor 500), for both pins (Fig. 3g –
scale factor 700) and for the sleeve coupling (Fig. 3h – scale factor 500).
a b
c d
e f
g h
Fig. 2 – Analysis procedure steps for sleeve couplings
with cylindrical pins in the same plane:
a – creating the 3D model; b – configuring the mesh; c – applying the restraints; d –
applying the loads; e – applying the interaction conditions; f – von Misses stress for
shafts; g – von Misses stress for pins; h – von Misses stress for sleeve coupling.