2012 - Europe Direct Iasi

10.6.
Title
Authors
Institution
EUROINVENT 2012
every time the microcontroller detects the rising or falling edges
of the event signal, an AD conversion starts. For being able to
measure time intervals shorter than an AD conversion, the
priority of the interrupt triggered by the event end is higher than
the priority of the interrupt initiated at the event onset. This
operation principle ensures the measurement of the time intervals
shorter than the interrupt latency. For evaluating the measured
events rate, the controller counts the time intervals at the
hardware level.
The MATLAB program processes the primary data generated by
the microcontroller, calculates the events durations, and
computes the average of the obtained results. Using the average
time and the events number, the program builds two images of
the analyzed figure by converting the data to gray-scale.
Applications:
- Parameter monitoring such as temperature, motors
speed and light intensity.
- Analysis of the electronic circuits behavior;
- Response time measuring of the analogue and digital
systems;
- Nuclear event counting;
2. Distance calculation using ultra-sounds or
electromagnetic waves.
3. Chaotic circuits behavior analysis
ELECTROMAGNETIC PULSE GENERATING
SYSTEM IN THE LOOP CURRENT CONTROLLED
EXPLOSION
Vasile DOBREF * ,Alexandru SOTIR*, Mircea
CONSTANTINESCU*, Mircea IGNAT**,Lucian
PÎSLARU-DĂNESCU**, Ioan PUFLEA**, Alexandru
Aristofan TEIŞANU**, Iulian IORDACHE**, Mihai
BĂDIC***
* The NAVAL ACADEMY “Mircea cel Bătrân”
Constantza-ROMANIA/** INCDIE ICPE-CA Bucureşti-
Class 10
143