RU 26 - emmerson

it can turn off the device. Check that the
other buttons of the remote are operating the
corresponding functions of the device. If the
remote does not work, please check the
code and brand again and repeat
programming. If the remote still does not
work please try other codes listed from the
code list.
4. If there isn’t any code working with your
device, please try our Power Searching and
Fastest Searching.
Power Searching:
1. Turn on the equipment you want the remote
to control, and point the remote toward it.
2 .Press Device Key (e.g. TV, VCR, SAT, etc)
and release
3. Press and hold the [SET] Key until the LED
turn on.
4. Press [POWER] and release, LED goes off
and flashes every 3 seconds. It stands for
entering the Power Searching Mode. In
Searching, you could press [UP] or [DOWN] to
change the direction.
5. Press [OK] to save the code until the device is
powered off.
6. You can power on the device again by hand
and test whether the function keys are
working, such as CH+, CH-. If the function
keys are not working, repeat Step 1 to Step 5.