Mustangs Unlimited - Mustang Center Almere
Mustangs Unlimited - Mustang Center Almere Mustangs Unlimited - Mustang Center Almere
Mustangs Unlimited 74 Differential Covers M4033G2 Ford Racing's axle girdle replaces your axle cover with this lightweight 356-T6 aluminum casting which is CNC-machined to exacting tolerances. Load bolts provide additional support for differential bearing caps while separate fill and drain ports ease servicing. *Check exterior clearance to chassis and suspension before installation. ‘05-11 8.8” ................M4033G2 ......$219.95 ea CNC machined for quality & precision. Hand deburred, inspected & assembled. Includes both fill & drain port for easier servicing. Has 2 load bolts & swivel “feet”. Increases fluid capacity by approx. 1 /2 pint. Decreases operating temp by 15ºF. Requires the Roush panhard rod relocation bracket, #RSH99. ‘05-11 GT 8.8” ...........RSH93 ...........$239.95 ea Panhard Bar Relocation Bracket ‘05-11 GT 8.8” ...........RSH99 ...........$89.95 ea Axle Cover Gaskets This gasket seals the axle cover to the axle housing. ‘05-11 8.8" ................RT16 ..............$3.95 ea ‘05-11 8.8” Reusable .RT59 .............$9.95 ea Fel-Pro is one of the best known brands in gaskets and you can expect superior quality sealing whenever their name is involved. ‘05-11 (7.5” not used in ‘11) 7.5” rear axle .............RDS55081 ....$12.95 ea 8.8” rear axle .............RDS55341 ....$9.95 ea Recommended for all high performance applications. Shims not included. M4204P31 Auburn Gears Ford Racing Auburn differentials feature a cone-type clutch system for long life and superior torque distribution. Not recommended for drag racing applications. 8.8” 28-spline ............M4204A28 .... $439.95 ea 8.8” 31-spline “Pro” ...M4204P31 ..... $534.95 ea M4204C75 Traction-Loks Distributing torque evenly to either side; this differential features plate-type clutches. Will accept anti-lock exciter ring on ABS models. 7.5” 28-spline ............M4204C75..... $199.95 ea 8.8” 28-spline ............M4204F288... $194.95 ea 8.8” 31-spline ............M4204F318 ... $239.95 ea 8.8” 31-spline, carbon fiber clutch plates ..................................M4204F318C . $249.95 ea 9” 28-Spline ..............M4204F28A .. $399.95 ea Traction-Loc Clutch Pack Fits all 8.8” Traction-Lok differentials. Includes: Shims: (2) .025”, (2) .030”, (2) .035”, (2) .040”, (2) .045”, pinion shaft lock bolt, (2) differential clutch packs, and friction modifier ..................................F2997 ............ $79.95 kit Limited Slip Differentials Connecticut 1-888-398-9898 • Georgia 1-888-229-2929 24 Hour Fax: CT 860-649-1260 • GA 770-446-3055 EA19605 The standard for durability and strength. These units are fully rebuildable and feature precisionforged gears. The carbon friction discs offer lifelong, chatter-free performance. 1-year manufacturer’s warranty. 8.8” 28-spline ............EA19605 .......$529.95 ea The Eaton E-Locker gives the driver full control at the touch of a button of when the differential is locked or unlocked from the driver's seat. Its ease of installation, reliability and push-button activation delivers smooth and consistent performance. 8.8” 28-spline ............EA19685 .......$799.95 ea 8.8” 31-spline ............EA19660 .......$799.95 ea VX182C Powertrax PowerTrax's No-Slip Traction System replaces the spider gears and clutches inside the stock limitedslip differential. This system eliminates the noise, harshness and ratcheting-around-turns associated with conventional lockers. No special tools are needed for installation or altering of the ring and pinion set-up. 8.8” 28-spline ............VX182B .........$439.95 ea 8.8” 31-spline ............VX182C .........$429.95 ea CE5003 Detroit Locker Differentials A Detroit Locker maximizes the available traction by delivering 100% of the torque & power to both drive wheels. It is engineered to keep both wheels in a constant drive mode, yet has the ability to unlock to permit the wheels to turn at different speeds if necessary, like going around corners. 9” 28-Spline ..............CE5003 .........$629.95 ea 9” 31-Spline ...............CE5004 .........$629.95 ea
RT3 RT42 Pinion and Carrier Bearing Kit Replacing these bearings can be cheap insurance against trouble down the road. Ratech supplies new pinion and carrier bearings to extend the life of your rear end. 8.8" axle ....................RT42 ..............$67.95 kit Carrier Shim Set Used to adjust the depth (or lash) of the ring gear's teeth as it is adjusted side-to-side to engage the pinion gear. 8.8" axle ....................RT3 ................$30.95 set Ring & Pinion Master Gear Kits Kit includes Motive gear set, pinion bearing, pinion seal, carrier bearings, pilot bearing, ring gear bolts, pinion shims, carrier shims, gear marking compound, crush sleeve, pinion nut, locktite, cover gasket, and (3) bottles of Red Line gear oil. 8.8” axle 3.08:1 .......................MG40 ............$274.88 kit 3.27:1 ........................MG43 ............$274.88 kit 3.55:1 .......................MG46 ............$274.88 kit 3.73:1 .......................MG49 ............$274.88 kit 4.10:1 ........................MG52 ............$274.88 kit 4.56:1 .......................MG55 ............$279.88 kit 4.88:1 .......................MG62 ............$299.88 kit Ring & Pinion Gear Kits Kit includes Motive gear set, pinion shims, carrier shims, pinion nut, ring gear bolts, gear marking compound, pinion seal, crush sleeve, cover gasket or RTV silicone, and (3) bottles of Red Line gear oil. 8.8” axle 3.08:1 .......................MG39 ............$229.88 kit 3.27:1 ........................MG42 ............$229.88 kit 3.55:1 .......................MG45 ............$229.88 kit 3.73:1 .......................MG48 ............$224.88 kit 4.10:1 ........................MG51 ............$229.88 kit 4.56:1 .......................MG54 ............$239.88 kit 4.88:1 .......................MG61 ............$249.88 kit Ring & Pinion Installation Kit Kit includes pinion shims, carrier shims, pinion nut, ring gear bolts, gear marking compound, pinion seal, crush sleeve, cover gasket or RTV silicone. 8.8” axle ....................MG56 ............$28.95 ea M4209F327 8.8” Rear Axle Ring & Pinion Sets Includes ring & pinion gears, and pinion nut. 3.08:1 .......................M4209F308..$179.95 set 3.27:1 ........................M4209F327 ..$194.95 set 3.55:1 .......................M4209G355 .$144.95 set 3.73:1 .......................M4209F373 ..$154.95 set 4.10:1 ........................M4209G410 ..$199.95 set 4.30:1 .......................M4209G430 . $229.95 set 4.56:1 .......................M4209G456 . $219.95 set 8.8” Rear Axle Ring & Pinion Sets Use pinion shim kit #KK44. 3.31:1 ........................GS331 ...........$179.95 set 3.55:1 .......................GS355 ...........$179.95 set 3.73:1 .......................GS373 ...........$179.95 set 3.90:1 .......................GS390 ...........$179.95 set 4.10:1 ........................GS410 ...........$179.95 set 4.30:1 .......................GS430 ...........$179.95 set 4.56:1 .......................GS456 ...........$179.95 set Pinion Shim Kit ............KK44 .............$10.95 set ‘05-11 Mustang See thousands of photos or order on-line 24 hours a day @ www.mustangsunlimited.com GS355 Performance Ring & Pinion Gear Set Made from high quality 8620 heat-treated steel, triple lapped for their final finish. 4.88 8.8” axle ............MG60 ............$189.95 set Ring & Pinion Gear Sets Add some push to your pony with a set of highstrength gears from Motive Gear. 3.45:1, 7.5” axle ........MG21 ............$149.95 kit 4:10:1, 7.5” axle .........MG22 ............$169.95 kit 3.08:1, 8.8” axle ........MG38 ............$169.95 kit 3.27:1, 8.8” axle ........MG41 ............$169.95 kit 3.55:1, 8.8” axle ........MG44 ............$169.95 kit 3.73:1, 8.8” axle ........MG47 ............$169.95 kit 4.10:1, 8.8” axle.........MG50 ............$169.95 kit 4.56:1, 8.8” axle ........MG53 ............$194.95 kit Economy Ring & Pinion Gear Sets 3.55:1, 8.8” axle ........MG44A ..........$139.95 kit 3.73:1, 8.8” axle ........MG47A ..........$139.95 kit 4.10:1, 8.8” axle.........MG50A ..........$139.95 kit 4.56:1, 8.8” axle ........MG53A ..........$139.95 kit Differential Bearing Kits Kit includes pinion bearing, pinion seal, carrier bearings, pilot bearing, gear marking compound, crush sleeve, pinion nut, locktite, cover gasket or RTV silicone. 8.8” axle ....................MG57 ............$62.95 kit Master Kit. Includes, pinion bearing, pinion seal, carrier bearings, pilot bearing, ring gear bolts, pinion shims, carrier shims, gear marking compound, crush sleeve, pinion nut locktite, cover gasket or RTV silicone. 8.8” axle ....................MG58 ............$79.95 kit G355KIT 8.8” Rear Axle Ring & Pinion Kits Improve acceleration with stronger gears! Ring and pinion kits include Ford Racing gear set, Red Line gear oil, cone-roller bearing, bearing race, and shim kit. 3.55:1 .......................G355KIT ........$224.88 kit 3.73:1 .......................F373KIT ........$239.88 kit 4.10:1 ........................G410KIT ........$309.88 kit 8.8” Rear Axle Ring & Pinion Sets 8.8” axle 3.55:1 .......................RG490103 ....$189.95 set 3.73:1 .......................RG490104 ....$194.95 set 4.10:1 ........................RG690310 ....$219.95 set Ring & Pinion Installation Kit This kit includes everything you need to completely install your rear axle gears. Kit includes: • Cover gasket • Ring gear bolts and washers • Crush sleeve • Pinion and carrier bearings • Pinion and carrier shims • Pinion nut and washer • Pinion seal • Marking compound and brush • Thread locking compound • Silicone sealer 8.8” axle ....................RG831043 ....$114.95 kit Gear Oil “Shock Proof” gear oil qt. Provides thicker oil films between gear teeth, completely resists throw-off, reduces metal-to-metal contact as well as temperature. Lightweight ................DA107 ...........$14.95 ea 75 Drivetrain
- Page 25 and 26: Customline Series With a black 2”
- Page 27 and 28: Kit includes: • 85mm Cold Air Kit
- Page 29 and 30: ‘05-11 Mustang XFI Camshafts The
- Page 31 and 32: 26308PT 26309PT Cylinder Head Gaske
- Page 33 and 34: Harmonic Balancers Underdrive Pulle
- Page 35 and 36: Fuse Box Covers UD5P ‘05-09, groo
- Page 37 and 38: 5550658 Billet Strut Covers Designe
- Page 39 and 40: JOIN TODAY! • 5% off all orders*
- Page 41 and 42: BBK1736 ‘05-09 GT Silver ........
- Page 43 and 44: Performance Air Filter ‘05-09 GT
- Page 45 and 46: ‘05-11 Mustang Vortech Supercharg
- Page 47 and 48: 435hp ROUSHcharger Kits Includes:
- Page 49 and 50: 63494 63496 Intercooler Water Pump
- Page 51 and 52: EDL70410 Performer “Dry” Nitrou
- Page 53 and 54: 50hp - 300hp Wet Nitrous System Is
- Page 55 and 56: Z82034B Nitrous Kit Adjustable 75-1
- Page 57 and 58: ‘07-09 GT500 Long Tube Headers Ge
- Page 59 and 60: Off-Road Long- Tube Headers with X-
- Page 61 and 62: Tru-Fit Cat Back Exhaust Made from
- Page 63 and 64: Long Tube Headers Ceramic coated ma
- Page 65 and 66: Shorty Headers Headers allow for mo
- Page 67 and 68: Radiator Covers PW356 See page 36 f
- Page 69 and 70: ‘05-11 Mustang Manual Transmissio
- Page 71 and 72: OEM Replacement Clutch Kit Replacem
- Page 73 and 74: Shifter Handle and M7213K Knobs Thi
- Page 75: M4006S197 8.8” Rear Axle Assembli
- Page 79 and 80: F4069 Factory Style Hoods ‘05-09
- Page 81 and 82: Front Bumper Covers Quality bumper
- Page 83 and 84: Street Wing This street wing from S
- Page 85 and 86: CA101A Body Styling Kit with “Agg
- Page 87 and 88: Made from tough urethane it can tak
- Page 89 and 90: Race 4-Point Roll Bar Super duty 4-
- Page 91 and 92: SS74592 Grille Shells Center-Mounte
- Page 93 and 94: Mirror Covers Painted with high-glo
- Page 95 and 96: D520 5.4 Nitrous Injected, 5” x 2
- Page 97 and 98: 5094 Quarter Window Trim Quarter Wi
- Page 99 and 100: MW3C ‘95 “Cobra R” Style Whee
- Page 101 and 102: ‘05-11 Mustang Carroll Shelby Whe
- Page 103 and 104: FR500S Hub Kit with ARP Studs Stand
- Page 105 and 106: Front "Big Brake" Eight-Piston Disc
- Page 107 and 108: Brembo Brake Kit Service replacemen
- Page 109 and 110: Handling Packages • Includes damp
- Page 111 and 112: BMR42 Lowering Springs These are ma
- Page 113 and 114: E51153 Anti-Roll Sway Bar Kits Manu
- Page 115 and 116: “K” Member Lower Support Brace
- Page 117 and 118: Coil-Overs Systems Adjustable Coil-
- Page 119 and 120: SPP1 Sway Bars Sway bars are post-a
- Page 121 and 122: HD Boxed Subframe Connectors These
- Page 123 and 124: Ignition Boxes Launch Master Module
- Page 125 and 126: F4066R ‘05-09 Headlights Halo sty
<strong><strong>Mustang</strong>s</strong> <strong>Unlimited</strong><br />
74<br />
Differential Covers<br />
M4033G2<br />
Ford Racing's axle girdle replaces your axle cover<br />
with this lightweight 356-T6 aluminum casting<br />
which is CNC-machined to exacting tolerances.<br />
Load bolts provide additional support for differential<br />
bearing caps while separate fill and drain ports<br />
ease servicing. *Check exterior clearance to chassis and<br />
suspension before installation.<br />
‘05-11 8.8” ................M4033G2 ......$219.95 ea<br />
CNC machined for quality & precision. Hand<br />
deburred, inspected & assembled. Includes both fill<br />
& drain port for easier servicing. Has 2 load bolts &<br />
swivel “feet”. Increases fluid capacity by approx. 1 /2<br />
pint. Decreases operating temp by 15ºF. Requires the<br />
Roush panhard rod relocation bracket, #RSH99.<br />
‘05-11 GT 8.8” ...........RSH93 ...........$239.95 ea<br />
Panhard Bar Relocation Bracket<br />
‘05-11 GT 8.8” ...........RSH99 ...........$89.95 ea<br />
Axle Cover Gaskets<br />
This gasket seals the axle cover to the axle housing.<br />
‘05-11 8.8" ................RT16 ..............$3.95 ea<br />
‘05-11 8.8” Reusable .RT59 .............$9.95 ea<br />
Fel-Pro is one of the best known brands in gaskets<br />
and you can expect superior quality sealing<br />
whenever their name is involved.<br />
‘05-11 (7.5” not used in ‘11)<br />
7.5” rear axle .............RDS55081 ....$12.95 ea<br />
8.8” rear axle .............RDS55341 ....$9.95 ea<br />
Recommended for all high performance applications. Shims not included.<br />
M4204P31<br />
Auburn Gears<br />
Ford Racing Auburn differentials feature a cone-type<br />
clutch system for long life and superior torque<br />
distribution.<br />
Not recommended for drag racing applications.<br />
8.8” 28-spline ............M4204A28 .... $439.95 ea<br />
8.8” 31-spline “Pro” ...M4204P31 ..... $534.95 ea<br />
M4204C75<br />
Traction-Loks<br />
Distributing torque evenly to either side; this<br />
differential features plate-type clutches. Will accept<br />
anti-lock exciter ring on ABS models.<br />
7.5” 28-spline ............M4204C75..... $199.95 ea<br />
8.8” 28-spline ............M4204F288... $194.95 ea<br />
8.8” 31-spline ............M4204F318 ... $239.95 ea<br />
8.8” 31-spline, carbon fiber clutch plates<br />
..................................M4204F318C . $249.95 ea<br />
9” 28-Spline ..............M4204F28A .. $399.95 ea<br />
Traction-Loc Clutch Pack<br />
Fits all 8.8” Traction-Lok differentials. Includes:<br />
Shims: (2) .025”, (2) .030”, (2) .035”, (2) .040”, (2)<br />
.045”, pinion shaft lock bolt, (2) differential clutch<br />
packs, and friction modifier<br />
..................................F2997 ............ $79.95 kit<br />
Limited Slip Differentials<br />
Connecticut 1-888-398-9898 • Georgia 1-888-229-2929 24 Hour Fax: CT 860-649-1260 • GA 770-446-3055<br />
EA19605<br />
The standard for durability and strength. These<br />
units are fully rebuildable and feature precisionforged<br />
gears. The carbon friction discs offer lifelong,<br />
chatter-free performance. 1-year manufacturer’s<br />
warranty.<br />
8.8” 28-spline ............EA19605 .......$529.95 ea<br />
The Eaton E-Locker gives the driver full control at<br />
the touch of a button of when the differential is<br />
locked or unlocked from the driver's seat. Its ease<br />
of installation, reliability and push-button activation<br />
delivers smooth and consistent performance.<br />
8.8” 28-spline ............EA19685 .......$799.95 ea<br />
8.8” 31-spline ............EA19660 .......$799.95 ea<br />
VX182C<br />
Powertrax<br />
PowerTrax's No-Slip Traction System replaces the<br />
spider gears and clutches inside the stock limitedslip<br />
differential. This system eliminates the noise,<br />
harshness and ratcheting-around-turns associated<br />
with conventional lockers. No special tools are<br />
needed for installation or altering of the ring and<br />
pinion set-up.<br />
8.8” 28-spline ............VX182B .........$439.95 ea<br />
8.8” 31-spline ............VX182C .........$429.95 ea<br />
CE5003<br />
Detroit Locker Differentials<br />
A Detroit Locker maximizes the available traction<br />
by delivering 100% of the torque & power to both<br />
drive wheels. It is engineered to keep both wheels in<br />
a constant drive mode, yet has the ability to unlock<br />
to permit the wheels to turn at different speeds if<br />
necessary, like going around corners.<br />
9” 28-Spline ..............CE5003 .........$629.95 ea<br />
9” 31-Spline ...............CE5004 .........$629.95 ea
Change language