Mustangs Unlimited - Mustang Center Almere

Mustangs Unlimited
68
Manual Transmission
Flywheels
R1540
RAM flywheels are dimensionally the same as stock
& have the same zero-balance specification as
stock flywheels. As well, they are stronger & have
increased RPM capability. Meets SFI specs 1.1.
*4.6L engines may have 6 or 8 bolts to attach to the
crankshaft. Check the VIN before ordering!
Billet Steel
‘05-10 GT ..................R1540 ...........$299.95 ea
‘07-10 GT500 ............R1545 ...........$299.95 ea
R2545
This SFI 1.1 approved flywheel weighs less than
stock & will allow your engine to rev quicker with
less stress on the rotating assembly. CNCmachined
from billet aluminum with a steel friction
surface insert. Even though this flywheel is SFI
approved, we still recommend a scattershield for
high performance & racing applications.
Aluminum
‘05-10 GT ..................R2540 ...........$434.95 ea
‘07-10 GT500 ............R2545 ...........$434.95 ea
Manual Transmission Clutch Kits
Connecticut 1-888-398-9898 • Georgia 1-888-229-2929 24 Hour Fax: CT 860-649-1260 • GA 770-446-3055
FD54
Clutch Kits
Clutch kits include clutch disc, pressure plate,
alignment tool, and throw out bearing.
‘05-10 GT, 11” 10-spline
Level 2.1 ....................FD54 .............$299.95 kit
Level 3.2 ....................FD49 .............$424.95 kit
Level 4.3 ....................FD53 .............$329.95 kit
Level 5.4 ....................FC6 ................$419.95 kit
Level 2.1 - Daily driver/basic modifications
Level 3.2 - Daily driver/moderate modifications
Level 4.3 - Street/Strip with extensive modifications
Level 5.4 - Designed for full race use
Twin Disc Clutch Kits
Twin disc clutches are designed to handle the needs of
your high performance vehicle without robbing your car
of drivability. This kit is capable of handling 625 ft/lbs
of torque with only minimally changing the stock pedal
pressure. The floater plate is strapped to eliminate the
annoying rattle most twin disc clutches are infamous
for. This kit also includes a state-of-the-art high quality
aluminum Fidanza flywheel.
‘05-10 GT 8.75” 10-Spline
Level 6.5 ....................FTC7 ..............$1,099.64 kit
‘05-10 GT 8.75” 26-Spline TKO
Level 6.5 ....................FTC8 ..............$1,099.64 kit
‘05-10 GT 8.75” 10-Spline
Level 7.6 ....................FTT6 ..............$1,249.64 kit
‘05-10 GT 8.75” 26-Spline TKO
Level 7.6 ....................FTT7 ..............$1,249.64 kit
Level 6.5 - 625 Max (ft/lbs)
Level 7.6 - 900 Max (ft/lbs)
FTC7
V5254
Clutch Kits
When the clutch goes out on your Mustang, trust no
other than Valeo clutches to deliver the OEM quality
Ford intended your car to have. This is a direct
replacement for your original clutch.
Kit Includes:
• Clutch Disc
• Pressure Plate
• Throw Out Bearing.
‘05-10
GT .............................V5280 ...........$474.95 ea
V6 ..............................V5254 ...........$359.95 ea
Z13
Clutch Kits
Zoom clutch kits are known for their brute strength
and proper fit the first time. Each kit includes clutch
disc, pressure plate, pilot and throw out bearings.
Stage 1
‘05-10 GT
11”.............................Z13 ................$339.95 kit
Stage 2
‘05-10 GT
11”.............................Z23 ................$394.95 kit
Stage 3
‘05-10 GT
11”.............................Z33 ................$329.95 kit
Stage 4
‘05-10 GT
11”.............................Z43 ................$429.95 kit
Stage 1- Daily driver/basic modifications
Stage 2- Daily driver/moderate modifications
Stage 3- Street/Strip with extensive modifications
Stage 4- Competition