Mustangs Unlimited - Mustang Center Almere

63494
63496
Intercooler Water Pump
This electric water pump circulates water from
the charge cooler below the supercharger to the
intercooler on 2007-2009 Mustang GT500.
This pump replaces original Ford casting #’s 7R3V-
8K232-AB or 7R3Z-8501-B.
‘07-09 GT500 ............PW474 ......... $199.95 ea
SLP36
63493
Supercharger Coolant Tanks
Designed for supercharged applications that run at
higher temperatures and require additional cooling.
Tank features increased capacity & can be filled
with dry ice, or ice for the track or dyno. Fabricated
aluminum for strength.
‘05-10 GT ..................63494* .........$164.95 ea
‘07-10 GT500 ............63493 ...........$314.95 ea
‘05-10 GT with Roush Supercharger
..................................63496 ...........$279.95 ea
*Tank will not fit in the stock location due to extra capacity, &
must be relocated.
SLP35
Supercharger Pulley Tool Packages
Includes supercharger pulley & puller tool. 2.70”
blower pulley provides approximately 3 additional
psi of boost. Gains of 35 rear-wheel horsepower.
Pulley is made from powder-coated ductile iron for
maximum durability & features extra deep grooved
ribs to eliminate belt slippage. Retains the use
of factory serpentine belt. Puller allows for easy
removal and installation of the supercharger pulley.
Removal is straight-forward, but the engine must be
completely cooled down before pulley is removed.
‘07-10 GT500
Pulley & Puller ............SLP34 ...........$284.95 pkg
2.70” Pulley Only ........SLP35 ...........$149.95 ea
Puller Only ..................SLP36 ...........$149.95 ea
Intercooled Single Turbo System
Includes 76mm Turbonetics turbo, Tial waste gate,
Granatelli compressor bypass valve, stainless steel
exhaust components from headers to the turbo, 2- 1 /2"
down pipe, high-flow twin cat system, aluminized
tubing from turbo-to-intercooler and from intercooler
to throttle body, twin 221 Spearco intercooler cores,
and hardware.
‘05-10 GT ..................GM11 .............$6,099.64 kit
Ball Bearing Turbo Upgrade
TURBONETICS unique patented Ceramic Ball-
Bearing concept has essentially eliminated
any concern of turbocharger durability in high
performance applications. Upgrade only available
when purchasing a New #GM11 complete turbo
system.
‘05-10 .......................GM14 .............$599.95 ea
Cooling Systems
You can get even more HP by super-cooling an
intercooler or aftercooler with a blast of freezing
CO 2 . Kit includes 10 pound tank (empty), cryogenic
solenoid valve, full wide open switch & arming
switch, and all fittings.
..................................DE80102 ......$299.95 kit
w/ 16” x 5” Intercooler sprayer
..................................DE80108 .......$359.95 kit
Same as above with the purge kit.
Single Purge ...............DE1A .............$389.88 kit
Dual Purge .................DE1B .............$399.88 kit
Blower Pulley
Increase boost and add tire shredding Horsepower!
Made from Billet steel, then nickel-plated, this pulley
is as durable as they get.
‘07-10 GT500 ............ST99..............$159.95 ea
‘05-11 Mustang
3” Turbo Downpipe Upgrade
Decreased back pressure will allow the turbo to
spool up faster and produce more power. The sway
bar relocation kit will be needed for installation of
the 3" down pipe.
‘05-10 .......................GM12 .............$249.95 ea
Swaybar Relocation Kit
When installing the Granatelli Motorsports 3"
down pipe on your turbocharged car this swaybar
relocation kit will allow you the needed clearance to
fit the oversized downpipe.
‘05-10 .......................GM13 .............$149.95 ea
DE80302
Purge Kits
Add a purge kit to your existing Cry0 2 Cooling
System.
Single ........................DE80302 .......$99.95 kit
Dual ...........................DE80303 .......$109.95 kit
Supercharger Pulley Puller
This special tool is designed to remove and install
the pulley on Ford superchargers.
‘07-10 GT500 ............5558902 .......$169.95 ea
See thousands of photos or order on-line 24 hours a day @ www.mustangsunlimited.com
47
Superchargers/Nitrous