Asnis Micro Flyer - Stryker
Asnis Micro Flyer - Stryker Asnis Micro Flyer - Stryker
Asnis Micro Cannulated Screw System 2.0mm & 3.0mm
- Page 2 and 3: Features and Benefits 2.0mm and 3.0
- Page 4: ormities Stryker Leibinger GmbH & C
<strong>Asnis</strong> <strong>Micro</strong><br />
Cannulated Screw System<br />
2.0mm & 3.0mm
Features and Benefits<br />
2.0mm and 3.0mm<br />
Diameters developed<br />
to meet the special<br />
needs of foot and hand<br />
surgeons<br />
Type III Anodization<br />
implants with Colour<br />
Coding for better<br />
distinction in the O.R.<br />
Equal Shaft and Core<br />
Diameters developed<br />
for minimization of<br />
stress risers<br />
Self Cutting Screw<br />
Design with an efficient<br />
cutting tip to improve<br />
insertion properties<br />
Low Profile Screw<br />
Heads specially<br />
designed for reduced<br />
potential of soft tissue<br />
irritation<br />
Reverse Cutting<br />
Flutes to facilitate<br />
implant removal
Related <strong>Stryker</strong> Products<br />
VariAx Foot Locking Plate System<br />
The reconstruction and fixation of bones in the<br />
foot can now be accomplished by means of the<br />
patented* SmartLock polyaxial locking mechanism.<br />
This powerful feature allows a surgeon to insert<br />
polyaxial locking or non-locking screws at variable<br />
angles with respect to the plate, so that they can be<br />
targeted to address the location and geometry of a<br />
given fracture or osteotomy.<br />
For more information, contact your local <strong>Stryker</strong><br />
Representative and ask for the Variax Foot Locking<br />
Plate System brochure (Ref.-No. 90-07804)<br />
*The SmartLock Locking Technology is patented (US 6,322,562; DE 43<br />
43 117; EP 1 143 867) by Professor Dietmar Wolter, Hamburg, Germany<br />
<strong>Asnis</strong> III<br />
The <strong>Asnis</strong> III Cannulated Screw System available in<br />
diameters 4.0mm, 5.0mm, 6.5mm and 8.0mm for<br />
additional indications within the Foot, Upper and<br />
Lower Extremities, Pelvis and Hip.<br />
This generation of Cannulated Screws has been<br />
designed to optimize surgical outcomes while<br />
simplifying procedures.<br />
For more information, contact your local <strong>Stryker</strong><br />
Representative and ask for the ASNIS III brochure<br />
(Ref.-No. 982187)<br />
<strong>Stryker</strong> Hand Plating System<br />
The <strong>Stryker</strong> Hand Plating System represents the<br />
next generation of bone fixation in hand surgery.<br />
It consists of the Profyle module including a wide<br />
range of standard fixation and compression plates<br />
and the VariAx Hand module including polyaxial<br />
locking implants.<br />
For more information, contact your local <strong>Stryker</strong><br />
Representative and ask for the <strong>Stryker</strong> Hand<br />
Plating System Operative Technique<br />
(Ref.-No. 90-07555)<br />
TwinFix - Cannulated Compression<br />
Screw<br />
The TwinFix cannulated compression screw allows<br />
the surgeon to individually adjust the compression<br />
force in situ for an advanced treatment of scaphoid<br />
fractures, scaphoid pseudarthrosis and radial head<br />
fractures.<br />
For more information, contact your local <strong>Stryker</strong><br />
Representative and ask for the TwinFix -<br />
Cannulated Compression Screw brochure<br />
(Ref.-No. 90-07542)
ormities<br />
<strong>Stryker</strong> Leibinger GmbH & Co. KG<br />
Bötzinger Strasse 39-41<br />
D-79111 Freiburg - Germany<br />
www.osteosynthesis.stryker.com<br />
The information presented in this brochure is intended to demonstrate a <strong>Stryker</strong> product. Always<br />
refer to the package insert, product label and/or user instructions before using any <strong>Stryker</strong> product.<br />
Surgeons must always rely on their own clinical judgment when deciding which products and<br />
techniques to use with their patients. Products may not be available in all markets. Product availability<br />
is subject to the regulatory or medical practices that govern individual markets. Please contact your<br />
<strong>Stryker</strong> representative if you have questions about the availability of <strong>Stryker</strong> products in your area.<br />
<strong>Stryker</strong> Corporation or its subsidiary owns the registered trademark: <strong>Stryker</strong><br />
<strong>Stryker</strong> Corporation or its subsidiary owns, uses or has applied for the following trademarks: <strong>Asnis</strong><br />
<strong>Micro</strong><br />
Wacker-Chemie GmbH owns the following trademark: Elastosil<br />
Literature Number : 90-17002<br />
LOT A2107<br />
Copyright © 2007 <strong>Stryker</strong><br />
Printed in Germany<br />
Trauma, Extremities & Deformities<br />
Biologics<br />
Surgical Products<br />
Neuro & ENT
Change language