WinEMP - NRI

National Rejectors, Inc. GmbH, Buxtehude INTRODUCTION
System requirements
To run the software WinEMP, your system must have the following in
terms of hardware and software:
Operating system Windows 95/98/NT/2000 (not CE)
Working memory of at least 32 MB
CD-ROM drive
Graphic resolution 800 x 600 dpi min.
Serial interface COM1/COM2
The use of the program WinEMP as well as the explanations in these
instructions pre-suppose a certain amount of basic Windows
knowledge.
Operating functions, general
This section contains the explanations of simple functions which occur
frequently. In the following chapters which explain setting up the device, it
has been assumed that the user knows these functions and they shall not
be explained again in the manual.
• Using the menu item BACK you always return to the previous screen –
possibly after confirming/declining the query Write data into
validator? by clicking on the button YES/NO (see chapter ”Menu
structure”).
• Using the menu item INFO, in the top right of the respective screen, an
information window will always be displayed giving the WinEMP
software version. By pressing OK the window closes again.
• Using the button ABORT the user aborts a process and leaves the
respective pop-up window.
• Letters in the menu bar and the pull down menus which have been
underlined are to be treated in the same way as in Windows and
represent the key which executes specific functions if pressed together
with the ”Alt” key.
• When selecting the functions using the main menu bar, the access
rights of the user are checked. A window is displayed.
• The lower screen bar contains information about the further use of the
software.
• For the purpose of simple navigation, the individual screens have been
given a title (in blue). These screen titles are also used in these
instructions.
6