WinEMP - NRI

National Rejectors, Inc. GmbH, Buxtehude GLOSSARY
Coin type All those coins are summarized under one coin
type which have the same → coin properties.
Critical coin Type of coin the recognition of which could be
difficult due to immense amounts of false coins.
Inhibit line Signal line from vending machine control to coin
validator which can block coin acceptance
completely.
Line → Coin signal line
Reference data Data required to generate acceptance bands for
Euro coins.
To convert the coin validators (not G-18.mft) to
Euro, the reference data must be generated by
inserting calibration discs.
Reference device A device of a series which is exclusively used to
measure calibration sets and is programmed for
Euro. Reference data used to measure the
calibration sets is stored here.
Return line When operating the return lever of the coin
validator, a return signal is transmitted along the
return signal line.
String sensor The coin validator’s sensor recognizes a coin
inserted with a piece of string attached to it.
String signal The → string sensor recognizes a piece of string
and transmits the string signal to the control unit.
Switch block The switch block is located on the rear of the coin
validator and incorporates a number of DIL
switches. Every switch is allocated to a → coin
channel, via which the individual → coin types can
be blocked or a function allocated.
Table Programming table to save information in the coin
validator e.g. about which coin channels are
allocated to the sorting chutes of the coin validator.
39