WinEMP - NRI

National Rejectors, Inc. GmbH, Buxtehude OPERATION
After the Euro conversion ...
After you have converted the coin validator to Euro we recommend that the
values transferred to the device are checked.
If your device is equipped with two data blocks, the coin validator must
first be switched to the appropriate data block using the DIL switch
(see appropriate instructions for the coin validator).
If you only wish to check whether the Euro coins have been
assigned to the correct coin channels, it is sufficient to compare
the channel values saved and the coin measurements using the
colour display on the table screen (see section ”Compare coin
values with stored channel values” in this chapter).
If you wish to determine how many percent
of the coins of the new coin type you have
inserted are accepted by the assigned
channel and wish to possibly adjust this
value, please proceed as described in the
section ”Adjust coin acceptance band”.
Exit program
If you have made all the required adjustments and seen and checked all
data and you wish to close WinEMP now, please proceed as follows:
• On the diagnostics screen (see page 10) please
select menu item EXIT.
The query window Do you want to quit? is
displayed.
• Click the mouse on YES if you really wish to exit and
close the program. After displaying the information
window Program is finished – please wait
WinEMP exits the program.
Select NO to return to the diagnostics screen.
32