WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>WinEMP</strong> – G-13.mft CONFIGURATION – FOR MDB/S1 INTERFACE<br />
Assign DIL switch to a coin type/coin group<br />
(only with single block data-management for inhibiting via DIL switches)<br />
If your coin validator data-manages all 32 coin channels in a single switching<br />
block and, if you want to be able to inhibit individual coin types or a coin group<br />
directly on site using the coin validator with the help of the DIL switches, you<br />
must assign the respective coin types to the first eight DIL switches of the<br />
upper switching block in <strong>WinEMP</strong> first:<br />
1 In the line of the respective coin channel under the heading "DIL-<br />
INH. 8–1", tick the desired switch by clicking the box and, if necessary,<br />
2 remove the tick set under any other switch by clicking the box.<br />
National Rejectors, Inc. GmbH, Buxtehude<br />
For a group inhibit, assign all relevant coin types (e.g. of a currency)<br />
to the same DIL switch.<br />
Make the setting easier and use the DIL switch simulation at the top<br />
of the screen:<br />
If you set a tick for a specific DIL switch for inhibiting in the<br />
simulation (here: DlL switch 4), <strong>WinEMP</strong> shows, for convenience, all<br />
the coin channels which have been inhibited via that switch, with a<br />
red bar (to the right of the channel number).<br />
3 Click BACK to store the setting in the G-13.mft or proceed to the next<br />
setting on this screen and store all your settings later.<br />
To inhibit the coin type/coin group all that has to be done is set the appropriate<br />
DIL switch to ON (see also separate instructions for the coin validator).<br />
99