WinEMP - NRI
WinEMP - NRI
WinEMP - NRI
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CONFIGURATION – FOR MDB/S1 INTERFACE<br />
96<br />
<strong>WinEMP</strong> – G-13.mft<br />
Define attraction time of the acceptance gate and display<br />
pre-magnetization/coin acceptance time and time periods of the<br />
accepted coin sensor<br />
The attraction time determines how long the solenoid of the acceptance gate<br />
is supposed to attract so that the gate will open and the inserted coins can<br />
be directed into the cash-box. Usually, the solenoid is attracting only as long<br />
as the coin has been accepted, i.e. the coin has passed the CP3 sensor.<br />
There are three different phases:<br />
• pre-magnetization time<br />
The solenoid is fully controlled in order to open the gate.<br />
• actual attraction time<br />
Solenoid control is timed (to conserve energy) in order to keep the<br />
gate open.<br />
• coin acceptance time<br />
Time after closing the acceptance gate which is available for the<br />
accepted coin sensors.<br />
This section merely describes how to set the actual attraction time.<br />
Pre-magnetization time, coin acceptance time as well as the CP3/<br />
CP4 time periods of the accepted coin sensor are only displayed for<br />
diagnostic purposes.<br />
If you want to change the attraction time of the solenoid of the acceptance<br />
gate:<br />
1 Select menu item EXTRA and then BASIC SETTINGS.<br />
The dialog box BASIC SETTINGS AND OPTIONS opens. In the "table of<br />
contents" on the left-hand side, the index word ACCEPTANCE GATE has<br />
already been selected.<br />
2 On the righthand<br />
side<br />
enter the<br />
desired<br />
ATTRACTION<br />
TIME using the<br />
keyboard.<br />
The attraction time can be 150 to 1000 ms (typical setting: 500 ms)<br />
and is converted into 4-ms increments.<br />
National Rejectors, Inc. GmbH, Buxtehude
Change language