WinEMP - NRI

WinEMP – G-13.mft CONFIGURATION – FOR MDB/S1 INTERFACE
Configure the smallest coin value as a basis of calculation for coin values
For the coin validator, the smallest coin value is the reference value for datamanaging
all programmed coin values. The values of all the coin types
accepted by the coin validator must be integral multiples of the smallest coin
value.
National Rejectors, Inc. GmbH, Buxtehude
If the smallest coin value is changed, the coin values of the
channels may also have to be changed accordingly! WinEMP
will mark these coin values in red for you. For changing the
values, please simply follow the queries automatically
generated by WinEMP (see also section "Configure coin value/
token identification" in this chapter).
When you have taught a new coin in a coin channel which is smaller than
the smallest coin value configured so far, that value must be set as a basis
of calculation for the coin validator:
1 Select menu item EXTRA and then BASIC SETTINGS.
The dialog box BASIC SETTINGS AND OPTIONS opens.
2 In the "table of
contents" on
the left-hand
side, select
the index word
SMALLEST
COIN VALUE
(for S1
devices COIN
VALUES).
3 On the righthand
side
enter the
desired
SMALLEST COIN VALUE using the keyboard.
4 Confirm your entry with OK and close the window again or proceed
to the next setting in this dialog box first and confirm all your settings
later.
5 Click BACK to store the setting in the G-13.mft or proceed to the next
setting on this screen and store all your settings later.
93