WinEMP - NRI

CONFIGURATION – FOR PARALLEL INTERFACE (TOTALIZER)
Send wake-up signal via return signal line (not for ECV totalizer)
90
WinEMP – G-13.mft
If the coin validator is supposed to send a wake-up signal to the machine via
the return signal line, as soon as it is woken up by insertion of a coin:
The G-13.mft can then neither send a return signal to the
machine when the return lever/button is operated nor use the
return signal line to sort coins.
1 Select menu item EXTRA and then OPTIONS.
The dialog box BASIC SETTINGS AND OPTIONS opens.
2 In the "table of
contents" on
the left-hand
side, select
the index word
WAKE-UP
FUNCTION.
3 On the righthand
side,
click TRANSMIT
WAKE-UP SIGNAL
(tick).
If you click
again the tick
would be removed and no wake-up signal would be sent to the
machine.
4 Confirm your entry with OK and close the window again or proceed
to the next setting in this dialog box first and confirm all your settings
later.
5 Click BACK to store the setting in the G-13.mft or proceed to the next
setting on this screen and store all your settings later.
National Rejectors, Inc. GmbH, Buxtehude